For HSI, MHI & HHI Futures Markets only:
Order Placements
The main objective of the pre-market mechanism is to establish the Calculated Opening Price (COP) before market open, so as to establish an orderly market open and enhance market efficiency.
Three trading sessions, namely the Pre-Opening Session, the Pre-Open Allocation Session and the Open Allocation Session, have been defined before market open for markets with Pre-market Opening Activities.
Session 1 (Pre-Opening)
• Users can place new, change or cancel Auction Orders, Limit Orders, and Inactive Orders. Most order types can be entered except Combinations and Bulletin Board orders.
• Long orders (GTC orders) from the previous trading day are included and open to be matched during the Pre-market Opening Period.
• Combination series will not be included in this session.
• Once the Calculated Opening Price (COP) is determined, it will be displayed in CLICK Trade windows. For algorithm of determining the COP, refer to Calculating COP in the later section.
• Both limit orders and auction orders can affect the COP.
Session 2 (Pre-Open Allocation)
• Only auction orders can be entered.
• Orders cannot be cancelled or changed.
• Only new auction orders can affect COP.
• Bulletin Board & Combination orders are not allowed.
Session 3 (Open-Allocation)
• Orders will be matched at the COP, if any, at the end of this session.
• Remaining unmatched orders will be converted as described below.
• For those orders that are matched at COP, “AUC” will be marked in the Deal Src column of Ticker window, Company Trades window and Clearing Trades window.
• Users are not able to add, change or cancel orders. The schedule of Pre-market Opening mechanism is summarized in the following table1:
Session Time(Morning Session) Time(Afternoon Session) Duration(Minutes)
Pre-Opening 9:15 – 9:41 14:00 – 14:26 26
Pre-Open Allocation 9:41 – 9:43 14:26 – 14:28 2
Open-Allocation 9:43 – 9:45 14:28 – 14:30 2
Order Types during the Pre-Market Opening
1. Auction Orders
Auction Orders are placed without a limit price and only allowed in the premarket opening period. If users enter an auction order, that means they are prepared to buy or sell at the COP. All Auction Orders will be displayed and matched in time priority basis.
Auction Orders will be displayed as COP or as “AO” if there is no COP in windows including Order Depth window, Price Depth window and Price Information window.
Unmatched Auction Orders will be converted after Open Allocation session in the following one or more attribute(s):
• If an Auction Order is partially filled at COP, the remaining quantity will be converted into a Limit Order at COP.
• If any Auction Orders are unmatched, and there is a COP, the Auction Orders will be converted to Limit Orders at COP.
• If any Auction Orders are unmatched, and there is no COP, the Auction Orders will be converted to Limit Orders at best BID and ASK prices.
• If any Auction Orders are unmatched, and there is no COP and no BID and ASK prices in the market, the Auction Orders will be put as inactive in the Order Book.
The priority of the converted Limit Orders will be according to the time when the original Auction Order was placed. Also, there will be an indicator in the Order Book or Order History window showing that the order have been converted or inactivated. All converted or inactivated orders will be valid until the end of the trading day.
2. Limit Orders
Limit Orders will be matched as much as possible automatically if it is at COP or better. For those limit orders with a bid higher or ask lower than the COP, it will be displayed as the COP. Any unmatched Limit Orders will remain as Limit Orders after the Open Allocation session.
3. Inactive Orders
Users can enter inactive orders by using the Enter Order window during the Pre-Market Opening Period. However, inactive orders are only allowed to be activated during the Pre-Opening Session or after market open.
Calculating COP
The COP is calculated every time an order is placed in the market and it will be displayed in the “EP” column of the Price Information Window. The COP is calculated according to the rules defined below:
1. The COP cannot fall outside the best bid and offer of unfilled orders, though it can be equal to the bid or offer;
2. If more than one price satisfy rules 1 above, the COP will be the price with the number of matched contracts is maximized;
3. If more than one price satisfy the rules 1 & 2 above, the COP will be the price at which the normal order imbalance2 is the lowest;
4. If more than one price satisfy the rules 1 - 3 above, the COP will be the price at which the associated crossed qty is the highest;
5. If more than one price satisfy 1 - 4 above, the COP will be the price closest to the settlement price of previous trading section;
6. If more than one price satisfy 1 - 5 above or if no settlement price is defined, the highest price will be chosen;
http://www.hkex.com.hk/infra/hkats/19.1UserGuide.pdf
分享到:
相关推荐
Pre-emphasis apparatus, low voltage differential signaling transmitter including the same and pre-emphasis method Pre-emphasis apparatus, low voltage differential signaling transmitter including the ...
`pre-commit.bat` 和 `pre-commit2.bat` 是两种可能的批处理文件,通常用于Windows环境。这些批处理文件包含了一组命令,当用户尝试提交时,这些命令会执行。例如,它们可以检查提交的文件是否遵循编码规范,是否有...
本文主要介绍了如何修改小新 Pro13 笔记本电脑BIOS中的DVMT(Dynamic Video Memory Technology,动态显存技术)Pre-Allocated数值,以满足macOS系统对至少64M DVMT值的需求。DVMT Pre-Allocated数值决定了分配给集成...
超聚变FCS-Pre-sales考试,真人验证,考试无忧。
[DEPPERCATED] You should not support pre-Lollipop in 2018. Easy to use and good effect in pre-Lollipop. Sample Import Gradle 1. Add it in your root build.gradle at the end of repositories allprojects...
clibwrapper_jiio-1.2-pre-dr-b04.jar jar包,好不容易才找到的,需要的话请下载。
.archanyconnect-win-3.1.00495-pre-deploy-k9.msi
在Windows环境下进行C语言的多线程编程时,我们常常会遇到一个问题,那就是Visual Studio (VS) 自带的多线程库并不能直接支持POSIX线程(pthread),这就需要我们引入第三方库,如"Pre-built.2.zip"提供的pthread库...
Certified Pre-sales Associate IP Network Datacom ENU(H19-301)认证考试题库,华为数通售前专家认证题库
Subversion 中的 pre-commit.bat Subversion 中的 Hook 机制是指在客户端与服务器端之间的交互过程中,服务器端可以根据需要执行某些操作,以确保提交的合法性和正确性。这些操作称为 Hook SCRIPT,其中包括 pre-...
### SVN Hook预提交(pre-commit)控制机制:禁止删除文件与强制添加注释 #### 一、SVN(Subversion)简介 SVN 是一个集中式的版本控制系统,它可以帮助团队管理和跟踪项目的开发过程。通过SVN,开发人员可以保存...
HCS-Pre-sales-IP 华为数通安全售前专家认证 H19-366题库
标题中的“前端开源库-git-pre-commit”指的是一个用于前端开发的开源工具,它与Git的预提交钩子(pre-commit hook)相关。Git预提交钩子是在提交代码之前执行的一段脚本,允许开发者在正式提交前进行一些检查或自动...
HCS-Pre-sales-数通L2安全题库,去考试一定要背题库
华为HCS-Pre-Sales-Bidding H19-365(含参考答案).pdf
预先提交 pre-commit是git的预提交钩子安装程序。 在提交更改之前,它将确保您的npm test (或其他指定的脚本)通过。 所有这些都可以在package.json方便地配置。 但是不用担心,您仍然可以通过告诉git只需使用--no-...
bt4-pre-final bt4-pre-final bt4-pre-final
实现gitlab服务端代码检测的钩子
在Subversion(简称SVN)中,`pre-revprop-change` 是一个钩子脚本,用于在修改版本库中的修订版本属性之前执行特定的检查和操作。在Windows环境下,通常使用`.bat`批处理文件作为`pre-revprop-change`的实现。此...