Redis for Windows

来自：http://zhaoshijie.iteye.com/blog/1989970，转载保留出处。

 

关键字：redis for Windows

一、windows下安装redis

1：首先下载redis:redis-2.0.2.zip (32 bit)，解压。
从下面地址下：http://code.google.com/p/servicestack/wiki/RedisWindowsDownload，看到下面有redis-2.0.2.zip (32 bit)，就是他了，下载完成后，解压到D:\redis-2.0.2.
2：创建redis.conf文件：
这是一个配置文件，指定了redis的监听端口，timeout等。如下面有：port 6379。
把下面内容COPY到一新建文件中，取名redis.conf,再保存到redis-2.0.2目录下：


# Redis configuration file example

# By default Redis does not run as a daemon. Use 'yes' if you need it.
# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
daemonize no

# When run as a daemon, Redis write a pid file in /var/run/redis.pid by default.
# You can specify a custom pid file location here.
pidfile /var/run/redis.pid

# Accept connections on the specified port, default is 6379
port 6379

# If you want you can bind a single interface, if the bind option is not
# specified all the interfaces will listen for connections.
#
# bind 127.0.0.1

# Close the connection after a client is idle for N seconds (0 to disable)
timeout 300

# Set server verbosity to 'debug'
# it can be one of:
# debug (a lot of information, useful for development/testing)
# notice (moderately verbose, what you want in production probably)
# warning (only very important / critical messages are logged)
loglevel debug

# Specify the log file name. Also 'stdout' can be used to force
# the demon to log on the standard output. Note that if you use standard
# output for logging but daemonize, logs will be sent to /dev/null
logfile stdout

# Set the number of databases. The default database is DB 0, you can select
# a different one on a per-connection basis using SELECT <dbid> where
# dbid is a number between 0 and 'databases'-1
databases 16

################################ SNAPSHOTTING  #################################
#
# Save the DB on disk:
#
#   save <seconds> <changes>
#
#   Will save the DB if both the given number of seconds and the given
#   number of write operations against the DB occurred.
#
#   In the example below the behaviour will be to save:
#   after 900 sec (15 min) if at least 1 key changed
#   after 300 sec (5 min) if at least 10 keys changed
#   after 60 sec if at least 10000 keys changed
save 900 1
save 300 10
save 60 10000

# Compress string objects using LZF when dump .rdb databases?
# For default that's set to 'yes' as it's almost always a win.
# If you want to save some CPU in the saving child set it to 'no' but
# the dataset will likely be bigger if you have compressible values or keys.
rdbcompression yes

# The filename where to dump the DB
dbfilename dump.rdb

# For default save/load DB in/from the working directory
# Note that you must specify a directory not a file name.
dir ./

################################# REPLICATION #################################

# Master-Slave replication. Use slaveof to make a Redis instance a copy of
# another Redis server. Note that the configuration is local to the slave
# so for example it is possible to configure the slave to save the DB with a
# different interval, or to listen to another port, and so on.
#
# slaveof <masterip> <masterport>

# If the master is password protected (using the "requirepass" configuration
# directive below) it is possible to tell the slave to authenticate before
# starting the replication synchronization process, otherwise the master will
# refuse the slave request.
#
# masterauth <master-password>

################################## SECURITY ###################################

# Require clients to issue AUTH <PASSWORD> before processing any other
# commands.  This might be useful in environments in which you do not trust
# others with access to the host running redis-server.
#
# This should stay commented out for backward compatibility and because most
# people do not need auth (e.g. they run their own servers).
#
# requirepass foobared

################################### LIMITS ####################################

# Set the max number of connected clients at the same time. By default there
# is no limit, and it's up to the number of file descriptors the Redis process
# is able to open. The special value '0' means no limts.
# Once the limit is reached Redis will close all the new connections sending
# an error 'max number of clients reached'.
#
# maxclients 128

# Don't use more memory than the specified amount of bytes.
# When the memory limit is reached Redis will try to remove keys with an
# EXPIRE set. It will try to start freeing keys that are going to expire
# in little time and preserve keys with a longer time to live.
# Redis will also try to remove objects from free lists if possible.
#
# If all this fails, Redis will start to reply with errors to commands
# that will use more memory, like SET, LPUSH, and so on, and will continue
# to reply to most read-only commands like GET.
#
# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a
# 'state' server or cache, not as a real DB. When Redis is used as a real
# database the memory usage will grow over the weeks, it will be obvious if
# it is going to use too much memory in the long run, and you'll have the time
# to upgrade. With maxmemory after the limit is reached you'll start to get
# errors for write operations, and this may even lead to DB inconsistency.
#
# maxmemory <bytes>

############################## APPEND ONLY MODE ###############################

# By default Redis asynchronously dumps the dataset on disk. If you can live
# with the idea that the latest records will be lost if something like a crash
# happens this is the preferred way to run Redis. If instead you care a lot
# about your data and don't want to that a single record can get lost you should
# enable the append only mode: when this mode is enabled Redis will append
# every write operation received in the file appendonly.log. This file will
# be read on startup in order to rebuild the full dataset in memory.
#
# Note that you can have both the async dumps and the append only file if you
# like (you have to comment the "save" statements above to disable the dumps).
# Still if append only mode is enabled Redis will load the data from the
# log file at startup ignoring the dump.rdb file.
#
# The name of the append only file is "appendonly.log"
#
# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
# log file in background when it gets too big.

appendonly no

# The fsync() call tells the Operating System to actually write data on disk
# instead to wait for more data in the output buffer. Some OS will really flush
# data on disk, some other OS will just try to do it ASAP.
#
# Redis supports three different modes:
#
# no: don't fsync, just let the OS flush the data when it wants. Faster.
# always: fsync after every write to the append only log . Slow, Safest.
# everysec: fsync only if one second passed since the last fsync. Compromise.
#
# The default is "always" that's the safer of the options. It's up to you to
# understand if you can relax this to "everysec" that will fsync every second
# or to "no" that will let the operating system flush the output buffer when
# it want, for better performances (but if you can live with the idea of
# some data loss consider the default persistence mode that's snapshotting).

appendfsync always
# appendfsync everysec
# appendfsync no

############################### ADVANCED CONFIG ###############################

# Glue small output buffers together in order to send small replies in a
# single TCP packet. Uses a bit more CPU but most of the times it is a win
# in terms of number of queries per second. Use 'yes' if unsure.
glueoutputbuf yes

# Use object sharing. Can save a lot of memory if you have many common
# string in your dataset, but performs lookups against the shared objects
# pool so it uses more CPU and can be a bit slower. Usually it's a good
# idea.
#
# When object sharing is enabled (shareobjects yes) you can use
# shareobjectspoolsize to control the size of the pool used in order to try
# object sharing. A bigger pool size will lead to better sharing capabilities.
# In general you want this value to be at least the double of the number of
# very common strings you have in your dataset.
#
# WARNING: object sharing is experimental, don't enable this feature
# in production before of Redis 1.0-stable. Still please try this feature in
# your development environment so that we can test it better.
# shareobjects no
# shareobjectspoolsize 1024

3：在cmd下面执行以下命令，指定它使用我们的redis.conf，同时也是启动，把redis运行起来，这里指定用redis.conf的配置运行服务器
D:\redis-2.0.2>redis-server.exe redis.conf

4:开一新DOS窗口cmd.执行以下命令，这是Redis的客户端程序：
redis-cli.exe -h 172.18.5.1 -p 6379
172.18.5.1是我本机IP地址，端口6379就是上面配置文件中指定的监听端口
执行完成后，应该能看到redis启动了，这时在第一个cmd窗口可以看到连接信息。
执行一条保存key value操作
set mystock 300156
再查询一下
get mystock

=================================

可以完全参考以下地址的资料：

http://hi.baidu.com/zchare/blog/item/bd6034f325d1c65f352acca1.html(very good,安全可以成功）

http://cardyn.iteye.com/blog/794194
http://zhaohaolin.iteye.com/blog/1017561


二、redis配置选项：

指定redis的配置文件，如没有指定，则使用默认设置
D:\redis-2.0.0-rc2>redis-server.exe redis.conf

redis.conf配置选项如下
daemonize 是否以后台进程运行，默认为no
pidfile 如以后台进程运行，则需指定一个pid，默认为/var/run/redis.pid
bind 绑定主机IP，默认值为127.0.0.1（注释）
port 监听端口，默认为6379
timeout 超时时间，默认为300（秒）
loglevel 日志记录等级，有4个可选值，debug，verbose（默认值），notice，warning
logfile 日志记录方式，默认值为stdout
databases 可用数据库数，默认值为16，默认数据库为0
save <seconds> <changes> 指出在多长时间内，有多少次更新操作，就将数据同步到数据文件。这个可以多个条件配合，比如默认配置文件中的设置，就设置了三个条件。
save 900 1  900秒（15分钟）内至少有1个key被改变
save 300 10  300秒（5分钟）内至少有300个key被改变
save 60 10000  60秒内至少有10000个key被改变
rdbcompression 存储至本地数据库时是否压缩数据，默认为yes
dbfilename 本地数据库文件名，默认值为dump.rdb
dir 本地数据库存放路径，默认值为 ./
slaveof <masterip> <masterport> 当本机为从服务时，设置主服务的IP及端口（注释）
masterauth <master-password> 当本机为从服务时，设置主服务的连接密码（注释）
requirepass 连接密码（注释）
maxclients 最大客户端连接数，默认不限制（注释）
maxmemory <bytes> 设置最大内存，达到最大内存设置后，Redis会先尝试清除已到期或即将到期的Key，当此方法处理后，任到达最大内存设置，将无法再进行写入操作。（注释）
appendonly 是否在每次更新操作后进行日志记录，如果不开启，可能会在断电时导致一段时间内的数据丢失。因为redis本身同步数据文件是按上面save条件来同步的，所以有的数据会在一段时间内只存在于内存中。默认值为no
appendfilename 更新日志文件名，默认值为appendonly.aof（注释）
appendfsync 更新日志条件，共有3个可选值。no表示等操作系统进行数据缓存同步到磁盘，always表示每次更新操作后手动调用fsync()将数据写到磁盘，everysec表示每秒同步一次（默认值）。
vm-enabled 是否使用虚拟内存，默认值为no
vm-swap-file 虚拟内存文件路径，默认值为/tmp/redis.swap，不可多个Redis实例共享
vm-max-memory 将所有大于vm-max-memory的数据存入虚拟内存,无论vm-max-memory设置多小,所有索引数据都是内存存储的(Redis的索引数据就是keys),也就是说,当vm-max-memory设置为0的时候,其实是所有value都存在于磁盘。默认值为0。

Redis官方文档对VM的使用提出了一些建议:
当你的key很小而value很大时,使用VM的效果会比较好.因为这样节约的内存比较大.
当你的key不小时,可以考虑使用一些非常方法将很大的key变成很大的value,比如你可以考虑将key,value组合成一个新的value.
最好使用linux ext3 等对稀疏文件支持比较好的文件系统保存你的swap文件.
vm-max-threads这个参数,可以设置访问swap文件的线程数,设置最好不要超过机器的核数.如果设置为0,那么所有对swap文件的操作都是串行的.可能会造成比较长时间的延迟,但是对数据完整性有很好的保证.redis-cli.exe：命令行客户端，测试用
D:\redis-2.0.0-rc2>redis-cli.exe -h 127.0.0.1 -p 6379

三、redis java操作（包括list/Map/删除/新增/覆盖/排序等都支持）

    import org.junit.After; 
    import org.junit.Before; 
    import org.junit.Test; 
    import redis.clients.jedis.Jedis; 
    import redis.clients.jedis.JedisPool; 
    import redis.clients.jedis.JedisPoolConfig; 
     
    import javax.sound.midi.Soundbank; 
    import java.util.*; 
     
    /**
     * @author: flychao88
     * Time: 2012.5.7 16:23:15
     */ 
    public class RedisTest { 
        JedisPool pool; 
        Jedis jedis; 
        @Before 
        public void setUp() { 
            pool = new JedisPool(new JedisPoolConfig(), "172.16.100.184"); 
     
            jedis = pool.getResource(); 
            jedis.auth("password"); 
        } 
     
        /**
         * Redis存储初级的字符串
         * CRUD
         */ 
        @Test 
        public void testBasicString(){ 
            //-----添加数据---------- 
            jedis.set("name","minxr");//向key-->name中放入了value-->minxr 
            System.out.println(jedis.get("name"));//执行结果：minxr 
     
            //-----修改数据----------- 
            //1、在原来基础上修改 
            jedis.append("name","jarorwar");   //很直观，类似map 将jarorwar append到已经有的value之后 
            System.out.println(jedis.get("name"));//执行结果:minxrjarorwar 
     
            //2、直接覆盖原来的数据 
            jedis.set("name","闵晓荣"); 
            System.out.println(jedis.get("name"));//执行结果：闵晓荣 
     
            //删除key对应的记录 
            jedis.del("name"); 
            System.out.println(jedis.get("name"));//执行结果：null 
     
            /**
             * mset相当于
             * jedis.set("name","minxr");
             * jedis.set("jarorwar","闵晓荣");
             */ 
            jedis.mset("name","minxr","jarorwar","闵晓荣"); 
            System.out.println(jedis.mget("name","jarorwar")); 
     
        } 
     
        /**
         * jedis操作Map
         */ 
        @Test 
        public void testMap(){ 
            Map<String,String> user=new HashMap<String,String>(); 
            user.put("name","minxr"); 
            user.put("pwd","password"); 
            jedis.hmset("user",user); 
            //取出user中的name，执行结果:[minxr]-->注意结果是一个泛型的List 
            //第一个参数是存入redis中map对象的key，后面跟的是放入map中的对象的key，后面的key可以跟多个，是可变参数 
            List<String> rsmap = jedis.hmget("user", "name"); 
            System.out.println(rsmap); 
     
            //删除map中的某个键值 
    //        jedis.hdel("user","pwd"); 
            System.out.println(jedis.hmget("user", "pwd")); //因为删除了，所以返回的是null 
            System.out.println(jedis.hlen("user")); //返回key为user的键中存放的值的个数1 
            System.out.println(jedis.exists("user"));//是否存在key为user的记录 返回true 
            System.out.println(jedis.hkeys("user"));//返回map对象中的所有key  [pwd, name] 
            System.out.println(jedis.hvals("user"));//返回map对象中的所有value  [minxr, password] 
     
            Iterator<String> iter=jedis.hkeys("user").iterator(); 
            while (iter.hasNext()){ 
                String key = iter.next(); 
                System.out.println(key+":"+jedis.hmget("user",key)); 
            } 
     
        } 
     
        /**
         * jedis操作List
         */ 
        @Test 
        public void testList(){ 
            //开始前，先移除所有的内容 
            jedis.del("java framework"); 
            System.out.println(jedis.lrange("java framework",0,-1)); 
           //先向key java framework中存放三条数据 
           jedis.lpush("java framework","spring"); 
           jedis.lpush("java framework","struts"); 
           jedis.lpush("java framework","hibernate"); 
           //再取出所有数据jedis.lrange是按范围取出， 
           // 第一个是key，第二个是起始位置，第三个是结束位置，jedis.llen获取长度 -1表示取得所有 
           System.out.println(jedis.lrange("java framework",0,-1)); 
        } 
     
        /**
         * jedis操作Set
         */ 
        @Test 
        public void testSet(){ 
            //添加 
            jedis.sadd("sname","minxr"); 
            jedis.sadd("sname","jarorwar"); 
            jedis.sadd("sname","闵晓荣"); 
            jedis.sadd("sanme","noname"); 
            //移除noname 
            jedis.srem("sname","noname"); 
            System.out.println(jedis.smembers("sname"));//获取所有加入的value 
            System.out.println(jedis.sismember("sname", "minxr"));//判断 minxr 是否是sname集合的元素 
            System.out.println(jedis.srandmember("sname")); 
            System.out.println(jedis.scard("sname"));//返回集合的元素个数 
        } 
     
        @Test 
        public void test() throws InterruptedException { 
            //keys中传入的可以用通配符 
            System.out.println(jedis.keys("*")); //返回当前库中所有的key  [sose, sanme, name, jarorwar, foo, sname, java framework, user, braand] 
            System.out.println(jedis.keys("*name"));//返回的sname   [sname, name] 
            System.out.println(jedis.del("sanmdde"));//删除key为sanmdde的对象  删除成功返回1 删除失败（或者不存在）返回 0 
            System.out.println(jedis.ttl("sname"));//返回给定key的有效时间，如果是-1则表示永远有效 
            jedis.setex("timekey", 10, "min");//通过此方法，可以指定key的存活（有效时间） 时间为秒 
            Thread.sleep(5000);//睡眠5秒后，剩余时间将为<=5 
            System.out.println(jedis.ttl("timekey"));   //输出结果为5 
            jedis.setex("timekey", 1, "min");        //设为1后，下面再看剩余时间就是1了 
            System.out.println(jedis.ttl("timekey"));  //输出结果为1 
            System.out.println(jedis.exists("key"));//检查key是否存在 
            System.out.println(jedis.rename("timekey","time")); 
            System.out.println(jedis.get("timekey"));//因为移除，返回为null 
            System.out.println(jedis.get("time")); //因为将timekey 重命名为time 所以可以取得值 min 
     
            //jedis 排序 
            //注意，此处的rpush和lpush是List的操作。是一个双向链表（但从表现来看的） 
            jedis.del("a");//先清除数据，再加入数据进行测试 
            jedis.rpush("a", "1"); 
            jedis.lpush("a","6"); 
            jedis.lpush("a","3"); 
            jedis.lpush("a","9"); 
            System.out.println(jedis.lrange("a",0,-1));// [9, 3, 6, 1] 
            System.out.println(jedis.sort("a")); //[1, 3, 6, 9]  //输入排序后结果 
            System.out.println(jedis.lrange("a",0,-1)); 
     
        } 




六、redis和memcached比较

1、memcached多线程    redis单线程

2、memcached支持简单的key/value  redis支持最为常用的数据类型主要由五种：String、Hash、List、Set和Sorted Set（最吸引人的就此，而且可以对list排序等）

3、memcached客户端实现分布式   redis服务器端实现分布式

4、

>>> 附件下载：

 

• redis-2.0.2.zip (1.1 MB)
• 下载次数: 15

• redis.conf.rar (3.4 KB)
• 下载次数: 14

• RedisTest.rar (1.7 KB)
• 下载次数: 15

• redisUtils（考虑了回收等问题，生产环境可用）.rar (1.5 MB)
• 下载次数: 13

• Redis发布订阅模式demo.rar (17.3 KB)
• 下载次数: 11

• redis（2.6.14）.conf.rar (13.1 KB)
• 下载次数: 6

• redis-windows启动脚本.rar (424 Bytes)
• 下载次数: 8

• redis2.6.12_win.zip (1.1 MB)
• 下载次数: 4

• redis2.6.14_其他人的经验-积累了一些经验及配置文件中文详解_.rar (1.4 MB)
• 下载次数: 14

• Redis桌面管理工具V1.5官方最新版_868291.rar (3 MB)
• 下载次数: 34

• RedisClient-master-监控工具GUI2.0.rar (4.4 MB)
• 下载次数: 16

>>> 镜像下载：