Ultimate Preset Bundle - 74 个高级预设-xmp格式

xmp文件格式

立即下载

上传者： qq_41824336 时间： 2022-06-10

XMP_2_0_Specification_Rev_1_0_DDR4XMP_intel_ddr4_文档_

DDR4 intel xmp spd jedec标准文档

立即下载

上传者： weixin_42666036 时间： 2021-09-29

itext相关JARitext-asian-5.2.0及itextpdf-5.5.13.1.zip

itext-asian-5.2.0及itextpdf-5.5.13.1两个jar包用于处理PDF文件

立即下载

上传者： weixin_43269414 时间： 2019-12-13

Intel_XMP_Spec_Rev1.1.pdf_XMP_Spec_Rev1.1_

Intel? Extreme Memory Profile (XMP) 规范文档PDF

立即下载

上传者： weixin_42682754 时间： 2021-09-30

CPU-Z 1.47,CPU 查看工具

CPU-Z Readme file ------------------ Version 1.47 August 2008 Contact : cpuz@cpuid.com Web page: http://www.cpuid.com/cpuz.php Validation page : http://valid.x86-secret.com/ Forum : http://forum.x86-secret.com/forumdisplay.php?f=16 CPUID SDK : http://www.cpuid-pro.com/devkits.php CPU-Z is a freeware and can be freely distributed. Configuration file (cpuz.ini) ------------------------------ The configuration file must be named cpuz.ini and be present at the same directory level as cpuz.exe. It contains the following : [CPU-Z] TextFontName=Verdana TextFontSize=13 TextFontColor=000060 LabelFontName=Verdana LabelFontSize=13 PCI=ON MaxPCIBus=256 DMI=ON Sensor=ON SMBus=ON Display=ON - TextFontName : Font used for the information boxes. - TextFontSize : Size of the font used for the information boxes. - TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB - LabelFontName : Font used for the label boxes. - LabelFontSize : Size of the font used for the label boxes. - Sensor : Set to OFF disables sensor chip detection and voltages measurement. - PCI : Set to OFF disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information. - MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256. - DMI : Set to OFF disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. - SMBus : Set to OFF disables SMBus information : SPD, and, depending on the hardware, sensoring information. - Display : Set to OFF disables the video card information reported in the validator. Parameters ---------- -txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt) in the same directory as the exe file. -html=filename : Same as "-txt" except it generates the html report. -core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one). Keys ---- F5 : save the current tab in a bmp file F6 : save the current tab in the clipboard F7 : save cvf file in the current directory Cache Latency Tool ------------------ The cache latency tool can be downloaded at that address : http://www.cpuid.com/download/latency.zip History ------- -------------------------------------------------------------------------------------------------- 1.47 - August 2008 - Intel Core i7 processor. - Intel Core 2 Duo S Mobile processors. - NVIDIA MCP79/7A chipset. - AMD 790GX / SB750 chipset. MD5 cpuz.exe (1.47) : A7484EFA3C32BC968C248CB1237FF493 -------------------------------------------------------------------------------------------------- 1.46 - June 2008 - AMD Puma platform (Turion & Turion Ultra "Griffin"); - AMD Black Edition processors. - Intel Xeon EX "Dunnington". MD5 cpuz.exe (1.46) : C47432C41EC26156128F7B8E09E884CF -------------------------------------------------------------------------------------------------- 1.45 - May 2008 - Intel Atom Z500/Z510/Z520/Z530/Z540 processors. - Intel Core 2 Duo E7x00 processor. - AMD 45 nm Phenom (Dened & Shanghai) processors. - Intel P45 chipset. MD5 cpuz.exe (1.45) : DD4E540C04297CF93DC721166C13446E -------------------------------------------------------------------------------------------------- 1.44.2 - Mars 2008 - NVIDIA 650i, 680i, 750a/780a, 750i, 780i, 790i chipsets (1.44.2) - Intel G35 chipset (1.44.2) - Updated support for VIA chipsets (1.44.2) - Support for the new validator (1.44.1) - Preliminary support for VIA Isaiah processor. - Support for all VIA Model D processors: VIA C7-M, VIA C7-D, VIA Eden, VIA Eden. - Memory timings on Intel 5400A/B MCH (Skulltrail). - Fix AMD Phenom detection issue on Windows Vista 64. MD5 (1.44.2) : 81FB48A6EC7355E8D0DD71ADC2157CF6 -------------------------------------------------------------------------------------------------- 1.43 - January 2008 - Intel Skulltrail platform support (Core 2 Extreme QX9775 + 5400B MCH). - Intel X48 chipset detection. - AMD Athlon 64-LE 1600 and 1620 support. - Fix detection issues on unlocked Phenom (ES/BE). -------------------------------------------------------------------------------------------------- 1.42 - November 2007 - Intel Wolfdale/Yorkfield/Penryn CPUs support. - AMD Phenom and Opteron Barcelona support improved. - Current core selection menu (right click on the CPU page). - Loading progress. -------------------------------------------------------------------------------------------------- 1.41 - September 2007 - New CPU voltage monitoring. - Intel Xeon Tigerton support. - Intel IA64 CPUs support (Itanium / Itanium2)(special thanks to Rami Radi and Ray Hinchliffe). - AMD K10 Phenom preliminary support. - NVIDIA MCP73 support. - Intel XMP profiles support. - Memory modules nominal voltage. -------------------------------------------------------------------------------------------------- 1.40.5 - July 2007 - NVIDIA nForce 560 chipset support. - Intel Dynamic FSB technology support. - Athlon 64 X2 BE & Sempron LE (TDP 45W). - SiS671/FX/DX/MX northbridge support. - SiS968 southbridge support. -------------------------------------------------------------------------------------------------- 1.40 - May 2007 - VIA P4M800CE chipset support. - Preliminary support for Intel Penryn CPUs family (45 nm). - Intel Core 2 Duo E6x20, Pentium E2140/2160 processors recognition. - Intel P35, G33, G31, Q35, Q33, X38 chipsets support. - Intel GL960/GM965/PM965 chipsets support. - AMD Athlon 64 "Lima" processor support. - AMD Geode LX processor support. - NVIDIA nForce 520 chipset support. - New parameter "-console" to generate output in a command prompt (Windows XP only). - New icon. -------------------------------------------------------------------------------------------------- 1.39 - February 2007 - Windows Vista 64 support. - VIA CX700/VX700 chipset. - Added Merom XE (X7900/X7800) - Added "PCI" and "MaxPCIBus" in the ini file to configure PCI scanning. - Added "-core" parameter to display the clock speed of the specified core. - Lot of bug fixes. -------------------------------------------------------------------------------------------------- 1.38 - November 2006 - VIA P4M890 and P4M900 chipsets. - NVIDIA 650i and 680i chipset. - AMD Athlon 64 FX-7x processor. - Core 2 Duo E6850, E6750, E6650 processors. - socket 775 Xeon processor. - New parameters "-txt" and "-html" (see above). - Lot of bug fixes. -------------------------------------------------------------------------------------------------- 1.37 - October 2006 - Intel Core 2 Quad, Celeron 360, Mobile Core 2 Duo T5200 support. - Changed SSE4 to SSSE3 (Supplemental SSE3). - Added VIA VT8237A southbridge. - New HTML report. - Several bug fixes. -------------------------------------------------------------------------------------------------- 1.36 - August 2006 - New processor information display. - Intel 5000X/P/Z/V SPD support. - Intel Pentium D 925 & 945. -------------------------------------------------------------------------------------------------- 1.35 - June 2006 - ATI RS350, RS400, RS480/RX480, RS482, RD580/RX580, RS600/RD600, RS690, RS700 chipsets support. - ATI SB600 southbridge support. - Intel P965 chipset support. - Engineering samples Core based CPUs report. - Windows Vista product line report. -------------------------------------------------------------------------------------------------- 1.34.1 - May 2006 - AMD socket AM2/S1/F (rev F.) CPUs support. - Enhanced Performance Profile (EPP) memory information report. - Added Trc (bank cycle time) in DDR2 SPD report. - Added Trc (bank cycle time) on i925, i945, i955, i975 chipsets. - FB-DIMM DDR2 SPD information report. - Core 2 Duo names and logos added. - Turion 64 X2 logo added. - Several bug fixed. -------------------------------------------------------------------------------------------------- 1.33.1 - April 2006 - Intel i965 chipset support added. - Fix SPD detection problem on SiS 964/965/966 southbridges. - ODC (Odd Divisor Correct) for Athlon64 rev E. -------------------------------------------------------------------------------------------------- 1.33 - April 2006 - Memory Command Rate timing added. - Improved support for Intel Conroe/Merom CPUs. - Celeron M 420/430 Yonah. - Xeon Dual core Dempsey. - VIA C7-M CPU detection added. - VIA PT880, PT880 Pro, K8T900 chipsets support. - nVidia nForce 550/560/570 (MCP55) chipset support. - VIA VT8251 southbridge support. - Fixed HyperTransport information misreports (in dump file). - Added K6-2 and K6-III logos. -------------------------------------------------------------------------------------------------- 1.32.1 - March 2006 - New Intel logos. - Added Pentium D 925, Pentium EE 965. - Several bugs fixed. -------------------------------------------------------------------------------------------------- 1.32 - February 2006 - Athlon FX-60 detection added. - Athlon64 new memory dividers. - Celeron 35x Cedar Mill, Pentium D 805. - Core Solo & Core Duo detection improved. - VIA C7 CPU detection added. - Intel i975X, i945GT chipsets support. - ATI RD580 chipset support. - ULi smbus support improved. - Fix smbus conflict with ClockGen. -------------------------------------------------------------------------------------------------- 1.31 - November 2005 - Improved support for ATI RS480/482 chipsets. - GeForce 6100/6150 (nForce 410/430) chipsets support. - Intel E7520 chipset support. - New CPUs support : AMD Opteron socket 939, Intel Pentium 4 Cedar Mill and Presler, Intel Xeon Paxville, Intel Pentium M Yonah SC & DC. - Several bug fixed. -------------------------------------------------------------------------------------------------- 1.30 - August 2005 - Latest Sempron and Turion support improved. - Intel Xeon Potomac, Pentium M 780 support. - Improved Windows version report. - Support for SMBus on latest SiS bridges (964, 965, 966) and ULi bridges. - Increased clocks refresh rate. - Several bug fixed. -------------------------------------------------------------------------------------------------- 1.29 - June 2005 - New PCI devices report. - Switch for VCore report in .ini file. - VCore report on some uGuru mainboards. - Improved clocks computation. - Improved support for latest AMD CPUs, Celeron D 3x1 (EM64T). - Improved support for SiS 649, 650 and 656 chipsets, Intel 915PM chipset. - Improved stability when several instances of CPU-Z are running in the same time. - Restored html report in ghost mode (see "Parameters" chapter above). -------------------------------------------------------------------------------------------------- 1.28.6 - March 2005 - Support for Athlon 64 X2 CPUs - Support for i955X chipset - Bunch of bugs -------------------------------------------------------------------------------------------------- 1.28 - March 2005 - Support for SiS chipsets improved : 648FX, 649, 655FX, 655TX, 656 - Support for nVidia nForce4 SLI Intel Edition - Support for Intel Pentium D, Pentium XE, AMD Turion, Opteron 252 - New F7 key to simplifiy the creation of the validation file -------------------------------------------------------------------------------------------------- 1.27 - February 2005 - Support for Intel Pentium 4 6xx CPUs. - New validation system. - Hundred of bug fixes. -------------------------------------------------------------------------------------------------- 1.26 - December 2004 - VCore display on Pentium M CPUs. - New CPU clock computation. - Improved support of Transmeta CPUs. - Several bugs fixed. -------------------------------------------------------------------------------------------------- 1.25 - November 2004 - nVidia nForce4 chipset support - Intel Pentium 4J support - New button to refresh memory timings - Several bugs fixed -------------------------------------------------------------------------------------------------- 1.24 - September 2004 - AMD Sempron support - New memory SPD page - PCI-Express graphic interface support - Configuration file - External cache latency tool - Restored html report - Fix several bugs -------------------------------------------------------------------------------------------------- 1.23 - June 2004 - Intel i915P/G, i925X chipsets support - Intel LGA775 CPUs support - Intel's CPU number display - New AMD Athlon 64 steppings - New report in one file -------------------------------------------------------------------------------------------------- 1.22 - April 2004 - New CPUs : Xeon Nocona, Celeron Prescott - DDR2 memory support - Clock mode when iconized -------------------------------------------------------------------------------------------------- 1.21 - January 2004 - one file package - Windows 64 support - new chipsets support - new CPU support : Celeron M, Pentium 4 "Prescott" -------------------------------------------------------------------------------------------------- 1.20a - October 2003 - memory frequency and ratio on nForce2 - KT600 support - W83627THF VRM mode - SPD read improvement - Fix some memory leaks (DMI) - Fix memory size report - Fix AGP side band status --------------------------------------------------------------------------------------------------

立即下载

上传者： esupermary 时间： 2008-11-18

CC BY-ND 4.0.xmp 3.xml

CC BY-ND 4.0.xmp 3.xml

立即下载

上传者： 2305_79597558 时间： 2023-11-20

Z270-DRAGON-ASUS-1205.zip

华硕z270DRAGON主板bios固件，编程器刷入，支持8/9代cpu处理器 R0微码。

立即下载

上传者： aaa0909sss 时间： 2020-06-08

XMP-Toolkit-SDK-CC201607.zip

xmp-toolkit 开发 编译所需要的第三方库， 放上来主要是方便大家下载，这样会比较快一些。!!!!!!!!!!!!!!

立即下载

上传者： digiman 时间： 2020-08-28

exiv2-0.27.0-4.el7-8.x64-86.rpm.tar.gz

1、文件内容：exiv2-0.27.0-4.el7_8.rpm以及相关依赖 2、文件形式：tar.gz压缩包 3、安装指令： #Step1、解压 tar -zxvf /mnt/data/output/exiv2-0.27.0-4.el7_8.tar.gz #Step2、进入解压后的目录，执行安装 sudo rpm -ivh *.rpm 4、安装指导：私信博主，全程指导安装

立即下载

上传者： weixin_47560078 时间： 2025-01-23

华南金牌X99-F8主板bios（支持XMP.UEFI.FSB锁定100）

华南金牌X99-F8-BIOS 修改： 1.锁定FSB 100MHz 2.增加支持XMP（去开启XMP后然后设置内存频率） 3.修改开机LOGO bilibili.com -szkifen

立即下载

上传者： weixin_44586249 时间： 2020-10-09

X99M Killer 3.1 lock-70mv.zip

X99M Killer 3.1 lock-70mv.zip

立即下载

上传者： xxzhaoming 时间： 2020-09-30

mediautil-1.0.jar + metadata-extractor-2.6.2.jar + xmpcore-5.1.2.jar

java图片处理的mediautil-1.0.jar + metadata-extractor-2.6.2.jar + xmpcore-5.1.2.jar

立即下载

上传者： dazhanglao 时间： 2018-11-13

cpuz 1.0 完美版

CPU-Z 自读文件 ------------------ Version 1.56 版本号 1.56 October 2010 2010年10月 Contact : cpuz@cpuid.com 联系我们 ：cpuz@cpuid.com Web page: http://www.cpuid.com/cpuz.php 网站：http://www.cpuid.com/cpuz.php Validation page : http://valid.canardpc.com 确认页面 ：http://valid.canardpc.com Hall of Fame : http://valid.canardpc.com/records.php 名人堂 :http://valid.canardpc.com/records.php Forum : http://forum.canardpc.com/forumdisplay.php?f=74 社区 ：http://forum.canardpc.com/forumdisplay.php? CPUID SDK : http://www.cpuid-pro.com/devkits.php CPUID SDK介绍 ：http://www.cpuid-pro.com/devkits.php Configuration file (cpuz.ini) 配置文件 (cpuz.ini) ------------------------------ The configuration file must be named cpuz.ini and be present at the same directory level as cpuz.exe. It contains the following : 配置文件必须存放在cpuz.exe. 同一文件夹下名字为cpuz.ini [CPU-Z] TextFontName=Verdana TextFontSize=13 TextFontColor=000060 LabelFontName=Verdana LabelFontSize=13 PCI=1 MaxPCIBus=256 DMI=1 Sensor=1 SMBus=1 Display=1 ShowDutyCycles=0 UseDisplayAPI=1 - TextFontName : Font used for the information boxes. 信息框字体样式 - TextFontSize : Size of the font used for the information boxes. 信息框字体大小 - TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB 信息框使用字体颜色。RBG颜色：RRGGBB/000060 - LabelFontName : Font used for the label boxes. 标签框字体样式 - LabelFontSize : Size of the font used for the label boxes. 标签框字体大小 - Sensor : Set to OFF (or 0) disables sensor chip detection and voltages measurement. 1 to enable.传感器检测设置，1为开启、0为关闭 关闭后将不显示温度及电压 - PCI : Set to OFF (or 0) disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information. 1 to enable.PCI检测设置，1为开启、0为关闭 关闭后将不会显示主板、SPD及硬件传感器信息 - MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256. - DMI : Set to OFF (or 0) disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. 1 to enable. DMI设置，1为开启、0为关闭。管壁厚 - SMBus : Set to OFF (or 0) disables SMBus information : SPD, and, depending on the hardware, sensoring information. 1 to enable.SMBUS设置，1为开启、0为关闭 关闭后将不会显示主板、SPD及硬件传感器信息 - Display : Set to OFF (or 0) disables the video card information reported in the validator. 1 to enable. 显示设备设置，1为启开、0为关闭 关闭后将不会显示显示设备信息 - ShowDutyCycles : Set to 1, switches the alternate clock computation method based on duty cycles. 0 to disable.占空比设置，1为开启、0为关闭 关闭后不会进行占空比计算时钟的方法 - UseDisplayAPI : Set to 1, uses the display driver to read the display adapters information. Parameters 参数 ---------- -txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt) in the same directory as the exe file. 导出报告为txt文本格式 -html=filename : Same as "-txt" except it generates the html report. 导出报告为html超文本格式 -core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one). Keys ---- F5 : save the current tab in a bmp file F5 ：保存当前页面为bmp文件 F6 : save the current tab in the clipboard F6 ：保存当前页面在剪贴板中 F7 : save cvf file in the current directory F7 ：保存CVF在默认目录 Cache Latency Tool ------------------ The cache latency tool can be downloaded at that address : http://www.cpuid.com/download/latency.zip Cache Latency Tool下载地址 ：http://www.cpuid.com/download/latency.zip History 更新历史 ------- -------------------------------------------------------------------------------------------------- 1.56 - October 2010 - Intel Core i3/i5/i7 "2000" serie processors (Sandy Bridge) with new logos. - Intel Core i7 970 "Gulftown". - Intel P67 chipset. - AMD Phenom II, Athlon II and Sempron II "Caspian" processors. -------------------------------------------------------------------------------------------------- 1.55 - July 2010 - VIA VX900/VX900M and VN1000/VN1000M chipsets. - Intel Core i5-760, Core i7-875K and Core i5-655K processors. - Intel Core i7-940XM, 840QM, 740QM mobile processors. - Intel Core i5-450M, 540UM, 430UM, Core i3-370M mobile processors. - Intel Pentium P6000 processor. - New parameter in cpuz.ini : UseDisplayAPI -------------------------------------------------------------------------------------------------- 1.54 - March 2010 - Intel Core i7-880, Core i5-680, Core i3-550 processors. - Intel Xeon 5600 line (32nm) processors. - AMD Phenom II X6, Sempron II, Turion II, Turion II Ultra and Athlon II Mobile "Caspian" processors. - NVIDIA GeForce 320M chipset. - AMD 870/880G890GX + SB800/SB850 chipset. - Introduction of validation rooms. -------------------------------------------------------------------------------------------------- 1.53 - December 2009 - Fix validation issue with AMD Phenom processors (1.53.1). - Preliminary support for Intel Pinetrail platform (1.53.1). - Intel Core i7 930 & 950, Core i7 980X "Gulftown", Xeon W3565. - Intel Mobile Core i7/i5/i3 "Arrendale" (LV and ULV). - Intel "Clarkdale" platform improved support. - AMD Phenom FX-5000, Athlon II X2/X3/X4, Athlon L110. - AMD AM3 socket detection improved. - VIA VX800 and VX855 chipsets support. - ATI Radeon 2100 and Radeon X1250 support. - DirectX 11 detection fix. - Hardware virtualization support now reported as instructions set. - New HTML report with less information. -------------------------------------------------------------------------------------------------- 1.52 - July 2009 - Fix Core i7 clock bug (1.52.2) - New design with "Graphics" tab. - NVIDIA nForce 980a chipset support. - Intel Core i5 and Core i3 processors. - Intel Atom Z530, Pentium DC E6300 (2.8GHz) and Core 2 Solo processors. - Intel P55 and US15W chipsets preliminary support. - AMD Phenom TWKR support. - AMD Phenom X2 "Callisto" and Athlon X2 "Regor" processors. - AMD Opteron 6-core "Istanbul" processor. - Improved support for Windows 7. - New Intel logos. MD5 checksum : please refer to http://www.cpuid.com/cpuz.php#history -------------------------------------------------------------------------------------------------- 1.51 - April 2009 - New version with installer. - NVIDIA ION platform. - Intel "Clarkdale" processor preliminary support. MD5 checksum : please refer to http://www.cpuid.com/cpuz.php#history -------------------------------------------------------------------------------------------------- 1.50 - February 2009 - Improved support for AMD Phenom II processor. - Support for NVIDIA 740i chipset. - Several bug fixes. MD5 cpuz.exe (1.50) : E1C827C54F527404EDDA6D65DA0280D8 -------------------------------------------------------------------------------------------------- 1.49 - December 2008 - AMD Phenom II processor. - New Intel Core 2 models. - Improved loading time. - New online validation process. MD5 cpuz.exe (1.49) : B836E86B40D7AFAF99D9C512E8CC9FEF -------------------------------------------------------------------------------------------------- 1.48 - October 2008 - Improved support for Intel Core i7 (Bloomfield & Gainestown). - Intel Atom dual-core version support. - AMD Athlon "Kuma" processor support. - Alternate clock computation method based on "duty cycles" for Intel Core 2 processors (see ShowDutyCycles in cpuz.ini) MD5 cpuz.exe (1.48) : DB78FBF1F99B7709240B495E59758CCE -------------------------------------------------------------------------------------------------- 1.47 - August 2008 - Intel Core i7 processor. - Intel Core 2 Duo S Mobile processors. - NVIDIA MCP79/7A chipset. - AMD 790GX / SB750 chipset. MD5 cpuz.exe (1.47) : A7484EFA3C32BC968C248CB1237FF493 -------------------------------------------------------------------------------------------------- 1.46 - June 2008 - AMD Puma platform (Turion & Turion Ultra "Griffin"); - AMD Black Edition processors. - Intel Xeon EX "Dunnington". MD5 cpuz.exe (1.46) : C47432C41EC26156128F7B8E09E884CF -------------------------------------------------------------------------------------------------- 1.45 - May 2008 - Intel Atom Z500/Z510/Z520/Z530/Z540 processors. - Intel Core 2 Duo E7x00 processor. - AMD 45 nm Phenom (Dened & Shanghai) processors. - Intel P45 chipset. MD5 cpuz.exe (1.45) : DD4E540C04297CF93DC721166C13446E -------------------------------------------------------------------------------------------------- 1.44.2 - Mars 2008 - NVIDIA 650i, 680i, 750a/780a, 750i, 780i, 790i chipsets (1.44.2) - Intel G35 chipset (1.44.2) - Updated support for VIA chipsets (1.44.2) - Support for the new validator (1.44.1) - Preliminary support for VIA Isaiah processor. - Support for all VIA Model D processors: VIA C7-M, VIA C7-D, VIA Eden, VIA Eden. - Memory timings on Intel 5400A/B MCH (Skulltrail). - Fix AMD Phenom detection issue on Windows Vista 64. MD5 (1.44.2) : 81FB48A6EC7355E8D0DD71ADC2157CF6 -------------------------------------------------------------------------------------------------- 1.43 - January 2008 - Intel Skulltrail platform support (Core 2 Extreme QX9775 + 5400B MCH). - Intel X48 chipset detection. - AMD Athlon 64-LE 1600 and 1620 support. - Fix detection issues on unlocked Phenom (ES/BE). -------------------------------------------------------------------------------------------------- 1.42 - November 2007 - Intel Wolfdale/Yorkfield/Penryn CPUs support. - AMD Phenom and Opteron Barcelona support improved. - Current core selection menu (right click on the CPU page). - Loading progress. -------------------------------------------------------------------------------------------------- 1.41 - September 2007 - New CPU voltage monitoring. - Intel Xeon Tigerton support. - Intel IA64 CPUs support (Itanium / Itanium2)(special thanks to Rami Radi and Ray Hinchliffe). - AMD K10 Phenom preliminary support. - NVIDIA MCP73 support. - Intel XMP profiles support. - Memory modules nominal voltage. -------------------------------------------------------------------------------------------------- 1.40.5 - July 2007 - NVIDIA nForce 560 chipset support. - Intel Dynamic FSB technology support. - Athlon 64 X2 BE & Sempron LE (TDP 45W). - SiS671/FX/DX/MX northbridge support. - SiS968 southbridge support. -------------------------------------------------------------------------------------------------- 1.40 - May 2007 - VIA P4M800CE chipset support. - Preliminary support for Intel Penryn CPUs family (45 nm). - Intel Core 2 Duo E6x20, Pentium E2140/2160 processors recognition. - Intel P35, G33, G31, Q35, Q33, X38 chipsets support. - Intel GL960/GM965/PM965 chipsets support. - AMD Athlon 64 "Lima" processor support. - AMD Geode LX processor support. - NVIDIA nForce 520 chipset support. - New parameter "-console" to generate output in a command prompt (Windows XP only). - New icon. -------------------------------------------------------------------------------------------------- 1.39 - February 2007 - Windows Vista 64 support. - VIA CX700/VX700 chipset. - Added Merom XE (X7900/X7800) - Added "PCI" and "MaxPCIBus" in the ini file to configure PCI scanning. - Added "-core" parameter to display the clock speed of the specified core. - Lot of bug fixes. -------------------------------------------------------------------------------------------------- 1.38 - November 2006 - VIA P4M890 and P4M900 chipsets. - NVIDIA 650i and 680i chipset. - AMD Athlon 64 FX-7x processor. - Core 2 Duo E6850, E6750, E6650 processors. - socket 775 Xeon processor. - New parameters "-txt" and "-html" (see above). - Lot of bug fixes. -------------------------------------------------------------------------------------------------- 1.37 - October 2006 - Intel Core 2 Quad, Celeron 360, Mobile Core 2 Duo T5200 support. - Changed SSE4 to SSSE3 (Supplemental SSE3). - Added VIA VT8237A southbridge. - New HTML report. - Several bug fixes. -------------------------------------------------------------------------------------------------- 1.36 - August 2006 - New processor information display. - Intel 5000X/P/Z/V SPD support. - Intel Pentium D 925 & 945. -------------------------------------------------------------------------------------------------- 1.35 - June 2006 - ATI RS350, RS400, RS480/RX480, RS482, RD580/RX580, RS600/RD600, RS690, RS700 chipsets support. - ATI SB600 southbridge support. - Intel P965 chipset support. - Engineering samples Core based CPUs report. - Windows Vista product line report. -------------------------------------------------------------------------------------------------- 1.34.1 - May 2006 - AMD socket AM2/S1/F (rev F.) CPUs support. - Enhanced Performance Profile (EPP) memory information report. - Added Trc (bank cycle time) in DDR2 SPD report. - Added Trc (bank cycle time) on i925, i945, i955, i975 chipsets. - FB-DIMM DDR2 SPD information report. - Core 2 Duo names and logos added. - Turion 64 X2 logo added. - Several bug fixed. -------------------------------------------------------------------------------------------------- 1.33.1 - April 2006 - Intel i965 chipset support added. - Fix SPD detection problem on SiS 964/965/966 southbridges. - ODC (Odd Divisor Correct) for Athlon64 rev E. -------------------------------------------------------------------------------------------------- 1.33 - April 2006 - Memory Command Rate timing added. - Improved support for Intel Conroe/Merom CPUs. - Celeron M 420/430 Yonah. - Xeon Dual core Dempsey. - VIA C7-M CPU detection added. - VIA PT880, PT880 Pro, K8T900 chipsets support. - nVidia nForce 550/560/570 (MCP55) chipset support. - VIA VT8251 southbridge support. - Fixed HyperTransport information misreports (in dump file). - Added K6-2 and K6-III logos. -------------------------------------------------------------------------------------------------- 1.32.1 - March 2006 - New Intel logos. - Added Pentium D 925, Pentium EE 965. - Several bugs fixed. -------------------------------------------------------------------------------------------------- 1.32 - February 2006 - Athlon FX-60 detection added. - Athlon64 new memory dividers. - Celeron 35x Cedar Mill, Pentium D 805. - Core Solo & Core Duo detection improved. - VIA C7 CPU detection added. - Intel i975X, i945GT chipsets support. - ATI RD580 chipset support. - ULi smbus support improved. - Fix smbus conflict with ClockGen. -------------------------------------------------------------------------------------------------- 1.31 - November 2005 - Improved support for ATI RS480/482 chipsets. - GeForce 6100/6150 (nForce 410/430) chipsets support. - Intel E7520 chipset support. - New CPUs support : AMD Opteron socket 939, Intel Pentium 4 Cedar Mill and Presler, Intel Xeon Paxville, Intel Pentium M Yonah SC & DC. - Several bug fixed. -------------------------------------------------------------------------------------------------- 1.30 - August 2005 - Latest Sempron and Turion support improved. - Intel Xeon Potomac, Pentium M 780 support. - Improved Windows version report. - Support for SMBus on latest SiS bridges (964, 965, 966) and ULi bridges. - Increased clocks refresh rate. - Several bug fixed. -------------------------------------------------------------------------------------------------- 1.29 - June 2005 - New PCI devices report. - Switch for VCore report in .ini file. - VCore report on some uGuru mainboards. - Improved clocks computation. - Improved support for latest AMD CPUs, Celeron D 3x1 (EM64T). - Improved support for SiS 649, 650 and 656 chipsets, Intel 915PM chipset. - Improved stability when several instances of CPU-Z are running in the same time. - Restored html report in ghost mode (see "Parameters" chapter above). -------------------------------------------------------------------------------------------------- 1.28.6 - March 2005 - Support for Athlon 64 X2 CPUs - Support for i955X chipset - Bunch of bugs -------------------------------------------------------------------------------------------------- 1.28 - March 2005 - Support for SiS chipsets improved : 648FX, 649, 655FX, 655TX, 656 - Support for nVidia nForce4 SLI Intel Edition - Support for Intel Pentium D, Pentium XE, AMD Turion, Opteron 252 - New F7 key to simplifiy the creation of the validation file -------------------------------------------------------------------------------------------------- 1.27 - February 2005 - Support for Intel Pentium 4 6xx CPUs. - New validation system. - Hundred of bug fixes. -------------------------------------------------------------------------------------------------- 1.26 - December 2004 - VCore display on Pentium M CPUs. - New CPU clock computation. - Improved support of Transmeta CPUs. - Several bugs fixed. -------------------------------------------------------------------------------------------------- 1.25 - November 2004 - nVidia nForce4 chipset support - Intel Pentium 4J support - New button to refresh memory timings - Several bugs fixed -------------------------------------------------------------------------------------------------- 1.24 - September 2004 - AMD Sempron support - New memory SPD page - PCI-Express graphic interface support - Configuration file - External cache latency tool - Restored html report - Fix several bugs -------------------------------------------------------------------------------------------------- 1.23 - June 2004 - Intel i915P/G, i925X chipsets support - Intel LGA775 CPUs support - Intel's CPU number display - New AMD Athlon 64 steppings - New report in one file -------------------------------------------------------------------------------------------------- 1.22 - April 2004 - New CPUs : Xeon Nocona, Celeron Prescott - DDR2 memory support - Clock mode when iconized -------------------------------------------------------------------------------------------------- 1.21 - January 2004 - one file package 一个文件包 - Windows 64 support 支持Windows64位操作系统 - new chipsets support 新主板支持 - new CPU support : Celeron M, Pentium 4 "Prescott" 新CPU支持：赛扬 M，奔腾4 "Prescott" -------------------------------------------------------------------------------------------------- 1.20a - October 2003 - memory frequency and ratio on nForce2 - KT600 support 增加对威盛KT600芯片组支持 - W83627THF VRM mode - SPD read improvement SPD - Fix some memory leaks (DMI) 修复一些内存DMI信息 - Fix memory size report 修复内存大小报告 - Fix AGP side band status 修复AGP带宽状态 --------------------------------------------------------------------------------------------------

立即下载

上传者： jenly22 时间： 2011-03-19

XMP-SDK-3-5-p1.zip_PhotoShop SDK_SDK_XMP_photoshop_ps.xmp

XMP SDK，Photoshop中关于XMP的解析请参考本资料，很实用

立即下载

上传者： weixin_42665255 时间： 2022-09-21

ir-xmp-decoder.rar_IR_space_xmp-1 ir协议

ir-xmp-decoder.c - handle XMP IR Pulse Space protocol.

立即下载

上传者： weixin_42651281 时间： 2022-09-24

技嘉B660主板bios配置原厂说明以及主板升级指导01

技嘉B660主板bios配置原厂说明以及主板升级指导

立即下载

上传者： weixin_43072508 时间： 2022-05-04

xmp.exe是什么进程-.docx

xmp.exe是什么进程-.docx

立即下载

上传者： Lidx0710 时间： 2021-09-27

七彩虹B365M-D5-魔改QTJ1 bios 改好的 软刷硬刷都OK

七彩虹B365M_D5_魔改QTJ1 bios 改好的 软刷硬刷都OK

立即下载

上传者： qq_21459681 时间： 2023-10-04

xmpcore-5.1.2-API文档-中文版.zip

赠送jar包：xmpcore-5.1.2.jar； 赠送原API文档：xmpcore-5.1.2-javadoc.jar； 赠送源代码：xmpcore-5.1.2-sources.jar； 赠送Maven依赖信息文件：xmpcore-5.1.2.pom； 包含翻译后的API文档：xmpcore-5.1.2-javadoc-API文档-中文(简体)版.zip； Maven坐标：com.adobe.xmp:xmpcore:5.1.2； 标签：adobe、xmp、xmpcore、中文文档、jar包、java； 使用方法：解压翻译后的API文档，用浏览器打开“index.html”文件，即可纵览文档内容。 人性化翻译，文档中的代码和结构保持不变，注释和说明精准翻译，请放心使用。

立即下载

上传者： qq_36462452 时间： 2022-07-13