`

errno.h

阅读更多
#define EPERM            1      /* Operation not permitted */
#define ENOENT           2      /* No such file or directory */
#define ESRCH            3      /* No such process */
#define EINTR            4      /* Interrupted system call */
#define EIO              5      /* I/O error */
#define ENXIO            6      /* No such device or address */
#define E2BIG            7      /* Argument list too long */
#define ENOEXEC          8      /* Exec format error */
#define EBADF            9      /* Bad file number */
#define ECHILD          10      /* No child processes */
#define EAGAIN          11      /* Try again */
#define ENOMEM          12      /* Out of memory */
#define EACCES          13      /* Permission denied */
#define EFAULT          14      /* Bad address */
#define ENOTBLK         15      /* Block device required */
#define EBUSY           16      /* Device or resource busy */
#define EEXIST          17      /* File exists */
#define EXDEV           18      /* Cross-device link */
#define ENODEV          19      /* No such device */
#define ENOTDIR         20      /* Not a directory */
#define EISDIR          21      /* Is a directory */
#define EINVAL          22      /* Invalid argument */
#define ENFILE          23      /* File table overflow */
#define EMFILE          24      /* Too many open files */
#define ENOTTY          25      /* Not a typewriter */
#define ETXTBSY         26      /* Text file busy */
#define EFBIG           27      /* File too large */
#define ENOSPC          28      /* No space left on device */
#define ESPIPE          29      /* Illegal seek */
#define EROFS           30      /* Read-only file system */
#define EMLINK          31      /* Too many links */
#define EPIPE           32      /* Broken pipe */
#define EDOM            33      /* Math argument out of domain of func */
#define ERANGE          34      /* Math result not representable */
#define EDEADLK         35      /* Resource deadlock would occur */
#define ENAMETOOLONG    36      /* File name too long */
#define ENOLCK          37      /* No record locks available */
#define ENOSYS          38      /* Function not implemented */
#define ENOTEMPTY       39      /* Directory not empty */
#define ELOOP           40      /* Too many symbolic links encountered */
#define EWOULDBLOCK     EAGAIN  /* Operation would block */
#define ENOMSG          42      /* No message of desired type */
#define EIDRM           43      /* Identifier removed */
#define ECHRNG          44      /* Channel number out of range */
#define EL2NSYNC        45      /* Level 2 not synchronized */
#define EL3HLT          46      /* Level 3 halted */
#define EL3RST          47      /* Level 3 reset */
#define ELNRNG          48      /* Link number out of range */
#define EUNATCH         49      /* Protocol driver not attached */
#define ENOCSI          50      /* No CSI structure available */
#define EL2HLT          51      /* Level 2 halted */
#define EBADE           52      /* Invalid exchange */
#define EBADR           53      /* Invalid request descriptor */
#define EXFULL          54      /* Exchange full */
#define ENOANO          55      /* No anode */
#define EBADRQC         56      /* Invalid request code */
#define EBADSLT         57      /* Invalid slot */
#define EDEADLOCK       EDEADLK
#define EBFONT          59      /* Bad font file format */
#define ENOSTR          60      /* Device not a stream */
#define ENODATA         61      /* No data available */
#define ETIME           62      /* Timer expired */
#define ENOSR           63      /* Out of streams resources */
#define ENONET          64      /* Machine is not on the network */
#define ENOPKG          65      /* Package not installed */
#define EREMOTE         66      /* Object is remote */
#define ENOLINK         67      /* Link has been severed */
#define EADV            68      /* Advertise error */
#define ESRMNT          69      /* Srmount error */
#define ECOMM           70      /* Communication error on send */
#define EPROTO          71      /* Protocol error */
#define EMULTIHOP       72      /* Multihop attempted */
#define EDOTDOT         73      /* RFS specific error */
#define EBADMSG         74      /* Not a data message */
#define EOVERFLOW       75      /* Value too large for defined data type */
#define ENOTUNIQ        76      /* Name not unique on network */
#define EBADFD          77      /* File descriptor in bad state */
#define EREMCHG         78      /* Remote address changed */
#define ELIBACC         79      /* Can not access a needed shared library */
#define ELIBBAD         80      /* Accessing a corrupted shared library */
#define ELIBSCN         81      /* .lib section in a.out corrupted */
#define ELIBMAX         82      /* Attempting to link in too many shared libraries */
#define ELIBEXEC        83      /* Cannot exec a shared library directly */
#define EILSEQ          84      /* Illegal byte sequence */
#define ERESTART        85      /* Interrupted system call should be restarted */
#define ESTRPIPE        86      /* Streams pipe error */
#define EUSERS          87      /* Too many users */
#define ENOTSOCK        88      /* Socket operation on non-socket */
#define EDESTADDRREQ    89      /* Destination address required */
#define EMSGSIZE        90      /* Message too long */
#define EPROTOTYPE      91      /* Protocol wrong type for socket */
#define ENOPROTOOPT     92      /* Protocol not available */
#define EPROTONOSUPPORT 93      /* Protocol not supported */
#define ESOCKTNOSUPPORT 94      /* Socket type not supported */
#define EOPNOTSUPP      95      /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT    96      /* Protocol family not supported */
#define EAFNOSUPPORT    97      /* Address family not supported by protocol */
#define EADDRINUSE      98      /* Address already in use */
#define EADDRNOTAVAIL   99      /* Cannot assign requested address */
#define ENETDOWN        100     /* Network is down */
#define ENETUNREACH     101     /* Network is unreachable */
#define ENETRESET       102     /* Network dropped connection because of reset */
#define ECONNABORTED    103     /* Software caused connection abort */
#define ECONNRESET      104     /* Connection reset by peer */
#define ENOBUFS         105     /* No buffer space available */
#define EISCONN         106     /* Transport endpoint is already connected */
#define ENOTCONN        107     /* Transport endpoint is not connected */
#define ESHUTDOWN       108     /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS    109     /* Too many references: cannot splice */
#define ETIMEDOUT       110     /* Connection timed out */
#define ECONNREFUSED    111     /* Connection refused */
#define EHOSTDOWN       112     /* Host is down */
#define EHOSTUNREACH    113     /* No route to host */
#define EALREADY        114     /* Operation already in progress */
#define EINPROGRESS     115     /* Operation now in progress */
#define ESTALE          116     /* Stale NFS file handle */
#define EUCLEAN         117     /* Structure needs cleaning */
#define ENOTNAM         118     /* Not a XENIX named type file */
#define ENAVAIL         119     /* No XENIX semaphores available */
#define EISNAM          120     /* Is a named type file */
#define EREMOTEIO       121     /* Remote I/O error */
#define EDQUOT          122     /* Quota exceeded */
#define ENOMEDIUM       123     /* No medium found */
#define EMEDIUMTYPE     124     /* Wrong medium type */
#define ECANCELED       125     /* Operation Canceled */
#define ENOKEY          126     /* Required key not available */
#define EKEYEXPIRED     127     /* Key has expired */
#define EKEYREVOKED     128     /* Key has been revoked */
#define EKEYREJECTED    129     /* Key was rejected by service */

/* for robust mutexes */
#define EOWNERDEAD      130     /* Owner died */
#define ENOTRECOVERABLE 131     /* State not recoverable */
分享到:
评论

相关推荐

    Linux下errno.h文件错误号说明.docx

    Linux errno.h 文件错误号说明 errno.h 文件是 Linux 系统中一个非常重要的头文件,它定义了一系列的错误号,每个错误号对应着一个特定的错误信息。了解这些错误号对于 Linux 系统的开发和调试至关重要。 在 Linux...

    C头文件 errno.h

    errno.h 是C语言C标准函式库里的标头档,定义了通过错误码来回报错误资讯的宏.

    wince5.rar_Fcntl.h wince_direct.h in ce_wince direct.h_wince err

    标签中的"fcntl.h_wince direct.h_in_ce wince_errno.h"暗示了`errno.h`的使用,这是一个定义了错误码的头文件,当函数调用失败时,`errno`变量会存储对应的错误代码。在Windows CE中,虽然`errno`仍然可用,但其...

    csapp_深入理解计算机系统_相关文件_csapp.h_csapp.c

    #include <errno.h> #include <math.h> #include <pthread.h> #include <semaphore.h> #include <sys/socket.h> #include <netdb.h> #include <netinet/in.h> #include <arpa/inet.h> /* Simplifies calls to bind...

    MinGW最新版5.0.X

    │ errno.h │ errorrep.h │ errors.h │ evcode.h │ excpt.h │ exdisp.h │ exdispid.h │ fcntl.h │ fenv.h │ float.h │ fltdefs.h │ gdiplus.h │ getopt.h │ gettext-po.h │ glob.h │ gmon.h │ ...

    C语言编程 多个常用头文件源代码

    C signal.h errno.h netdb.h setjmp.h signal.h string.hC signal.h errno.h netdb.h setjmp.h signal.h string.hC signal.h errno.h netdb.h setjmp.h signal.h string.h

    UNIX头文件大全(.h文件压缩包)

    11. `<errno.h>`:错误码定义,通过`errno`全局变量获取错误信息。 这些头文件不仅限于以上列举的,实际上还有很多其他头文件,涵盖了网络编程(如`<netdb.h>`、`<arpa/inet.h>`)、系统调用(如`<sys/syscall.h>`...

    Linux中errno使用.docx

    errno 变量是通过 include errno.h 头文件来定义的,errno 的值是一个整数,它的值可以通过查看 errno.h 中的宏定义来推测出错的原因。 在 Linux 中,当 C API 函数发生异常时,会将 errno 变量赋一个整数值,表示...

    用c语言实现的shell解释器

    #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/wait.h> #include <unistd.h> #define MAX_HOST_LEN 32 /* 主机名最大长度 */ #define MAX...

    C标准库文档,包括标准库中12个头文件的描述

    * <errno.h> : Error Codes Reported by (Some) Library Functions * <float.h> : Implementation-defined Floating-Point Limits * <limits.h> : Implementation-defined Limits * <locale.h> : Locale-...

    用c语言实现的逆序文本程序

    #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/wait.h> #include <unistd.h> #define MAX_HOST_LEN 32 /* 主机名最大长度 */ #define MAX...

    coino.h crtdefs.h _mingw.h

    `crtdefs.h`会定义一些预处理器宏,如`__cdecl`和`__stdcall`来指定函数调用约定,还有一些全局变量的声明,比如`errno`,用于存储错误代码。它还包含了对`_EXCEPTION_DISPOSITION`枚举类型的定义,这是处理异常时...

    linux 下grep命令C代码实现

    #include <errno.h> #include <getopt.h> #include <limits.h> #include <libgen.h> #include <locale.h> #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> ...

    linux头文件介绍

    <errno.h > 出错码 <fcntl.h > 文件控制 <float.h > 浮点常数 <signal.h > 信号 <stdarg.h > 可变参数表 <stddef.h > 标准定义 <stdio.h > 标准I/O库 <stdlib.h > 公用函数 <string.h > 字符串操作 ......

    socket_linux_client.c

    #include <errno.h> //定义错误码 #include <string.h>//字符串处理 #include <netdb.h> #include <sys/types.h>//send();recv(); #include <netinet/in.h>//htons(); #include <sys/socket.h>//send();recv(); #...

    GPIO模拟I2C程序实现

    #include <linux/errno.h> #include <linux/miscdevice.h> #include <linux/fcntl.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/proc_fs.h> #include <linux/workqueue.h> #include ...

    C/C++语言头文件(全)

    #include <errno.h> //定义错误码 #include <float.h> //浮点数处理 #include <fstream.h> //文件输入/输出 #include <iomanip.h> //参数化输入/输出 #include <iostream.h> //数据流输入/输出 #include ...

    mysql 5.5版 头文件(mysql.h等)

    2. `mysql_error.h`:这个头文件定义了错误处理相关的函数和宏,如`mysql_errno()`返回最后一次操作的错误代码,`mysql_error()`返回对应的错误信息字符串,以及`MYSQL_ERRNO_*`常量,表示预定义的错误编号。...

    c标准库

    在<math.h>中也提到了数学函数返回值的错误码处理,通过全局变量errno来标识错误类型。例如,当计算结果为非数字NaN时,函数会设置errno为EDOM,而当结果溢出时,errno会被设置为ERRANGE。 最后,<math.h>提供了...

Global site tag (gtag.js) - Google Analytics