20 Linux System Monitoring Tools Every SysAdmin Should Know

Need to monitor Linux server performance? Try these built-in command and a few add-on tools. Most Linux distributions are equipped with tons of monitoring. These tools provide metrics which can be used to get information about system activities. You can use these tools to find the possible causes of a performance problem. The commands discussed below are some of the most basic commands when it comes to system analysis and debugging server issues such as:

1. Finding out bottlenecks.
2. Disk (storage) bottlenecks.
3. CPU and memory bottlenecks.
4. Network bottlenecks.

#1: top - Process Activity Command

The top program provides a dynamic real-time view of a running system i.e. actual process activity. By default, it displays the most CPU-intensive tasks running on the server and updates the list every five seconds.

Fig.01: Linux top command

Commonly Used Hot Keys

The top command provides several useful hot keys:

Hot Key Usage

t	Displays summary information off and on.
m	Displays memory information off and on.
A	Sorts the display by top consumers of various system resources. Useful for quick identification of performance-hungry tasks on a system.
f	Enters an interactive configuration screen for top. Helpful for setting up top for a specific task.
o	Enables you to interactively select the ordering within top.
r	Issues renice command.
k	Issues kill command.
z	Turn on or off color/mono

=> Related: How do I Find Out Linux CPU Utilization?

#2: vmstat - System Activity, Hardware and System Information

The command vmstat reports information about processes, memory, paging, block IO, traps, and cpu activity.
# vmstat 3
Sample Outputs:

procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------


 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa st


 0  0      0 2540988 522188 5130400    0    0     2    32    4    2  4  1 96  0  0


 1  0      0 2540988 522188 5130400    0    0     0   720 1199  665  1  0 99  0  0


 0  0      0 2540956 522188 5130400    0    0     0     0 1151 1569  4  1 95  0  0


 0  0      0 2540956 522188 5130500    0    0     0     6 1117  439  1  0 99  0  0


 0  0      0 2540940 522188 5130512    0    0     0   536 1189  932  1  0 98  0  0


 0  0      0 2538444 522188 5130588    0    0     0     0 1187 1417  4  1 96  0  0


 0  0      0 2490060 522188 5130640    0    0     0    18 1253 1123  5  1 94  0  0

Display Memory Utilization Slabinfo

# vmstat -m

Get Information About Active / Inactive Memory Pages

# vmstat -a
=> Related: How do I find out Linux Resource utilization to detect system bottlenecks?

#3: w - Find Out Who Is Logged on And What They Are Doing

w command displays information about the users currently on the machine, and their processes.
# w username
# w vivek
Sample Outputs:

 17:58:47 up 5 days, 20:28,  2 users,  load average: 0.36, 0.26, 0.24


USER     TTY      FROM              LOGIN@   IDLE   JCPU   PCPU WHAT


root     pts/0    10.1.3.145       14:55    5.00s  0.04s  0.02s vim /etc/resolv.conf


root     pts/1    10.1.3.145       17:43    0.00s  0.03s  0.00s w

#4: uptime - Tell How Long The System Has Been Running

The uptime command can be used to see how long the server has been running. The current time, how long the system has been running, how many users are currently logged on, and the system load averages for the past 1, 5, and 15 minutes.
# uptime
Output:

 18:02:41 up 41 days, 23:42,  1 user,  load average: 0.00, 0.00, 0.00

1 can be considered as optimal load value. The load can change from system to system. For a single CPU system 1 - 3 and SMP systems 6-10 load value might be acceptable.

#5: ps - Displays The Processes

ps command will report a snapshot of the current processes. To select all processes use the -A or -e option:
# ps -A
Sample Outputs:

  PID TTY          TIME CMD


    1 ?        00:00:02 init


    2 ?        00:00:02 migration/0


    3 ?        00:00:01 ksoftirqd/0


    4 ?        00:00:00 watchdog/0


    5 ?        00:00:00 migration/1


    6 ?        00:00:15 ksoftirqd/1


....


.....


 4881 ?        00:53:28 java


 4885 tty1     00:00:00 mingetty


 4886 tty2     00:00:00 mingetty


 4887 tty3     00:00:00 mingetty


 4888 tty4     00:00:00 mingetty


 4891 tty5     00:00:00 mingetty


 4892 tty6     00:00:00 mingetty


 4893 ttyS1    00:00:00 agetty


12853 ?        00:00:00 cifsoplockd


12854 ?        00:00:00 cifsdnotifyd


14231 ?        00:10:34 lighttpd


14232 ?        00:00:00 php-cgi


54981 pts/0    00:00:00 vim


55465 ?        00:00:00 php-cgi


55546 ?        00:00:00 bind9-snmp-stat


55704 pts/1    00:00:00 ps

ps is just like top but provides more information.

Show Long Format Output

# ps -Al
To turn on extra full mode (it will show command line arguments passed to process):
# ps -AlF

To See Threads ( LWP and NLWP)

# ps -AlFH

To See Threads After Processes

# ps -AlLm

Print All Process On The Server

# ps ax
# ps axu

Print A Process Tree

# ps -ejH
# ps axjf
# pstree

Print Security Information

# ps -eo euser,ruser,suser,fuser,f,comm,label
# ps axZ
# ps -eM

See Every Process Running As User Vivek

# ps -U vivek -u vivek u

Set Output In a User-Defined Format

# ps -eo pid,tid,class,rtprio,ni,pri,psr,pcpu,stat,wchan:14,comm
# ps axo stat,euid,ruid,tty,tpgid,sess,pgrp,ppid,pid,pcpu,comm
# ps -eopid,tt,user,fname,tmout,f,wchan

Display Only The Process IDs of Lighttpd

# ps -C lighttpd -o pid=
OR
# pgrep lighttpd
OR
# pgrep -u vivek php-cgi

Display The Name of PID 55977

# ps -p 55977 -o comm=

Find Out The Top 10 Memory Consuming Process

# ps -auxf | sort -nr -k 4 | head -10

Find Out top 10 CPU Consuming Process

# ps -auxf | sort -nr -k 3 | head -10

#6: free - Memory Usage

The command free displays the total amount of free and used physical and swap memory in the system, as well as the buffers used by the kernel.
# free
Sample Output:

            total       used       free     shared    buffers     cached


Mem:      12302896    9739664    2563232          0     523124    5154740


-/+ buffers/cache:    4061800    8241096


Swap:      1052248          0    1052248

=> Related: :

1. Linux Find Out Virtual Memory PAGESIZE
2. Linux Limit CPU Usage Per Process
3. How much RAM does my Ubuntu / Fedora Linux desktop PC have?

#7: iostat - Average CPU Load, Disk Activity

The command iostat report Central Processing Unit (CPU) statistics and input/output statistics for devices, partitions and network filesystems (NFS).
# iostat
Sample Outputs:

Linux 2.6.18-128.1.14.el5 (www03.nixcraft.in) 	06/26/2009



avg-cpu:  %user   %nice %system %iowait  %steal   %idle


           3.50    0.09    0.51    0.03    0.00   95.86



Device:            tps   Blk_read/s   Blk_wrtn/s   Blk_read   Blk_wrtn


sda              22.04        31.88       512.03   16193351  260102868


sda1              0.00         0.00         0.00       2166        180


sda2             22.04        31.87       512.03   16189010  260102688


sda3              0.00         0.00         0.00       1615          0

=> Related: : Linux Track NFS Directory / Disk I/O Stats

#8: sar - Collect and Report System Activity

The sar command is used to collect, report, and save system activity information. To see network counter, enter:
# sar -n DEV | more
To display the network counters from the 24th:
# sar -n DEV -f /var/log/sa/sa24 | more
You can also display real time usage using sar:
# sar 4 5
Sample Outputs:

Linux 2.6.18-128.1.14.el5 (www03.nixcraft.in) 		06/26/2009



06:45:12 PM       CPU     %user     %nice   %system   %iowait    %steal     %idle


06:45:16 PM       all      2.00      0.00      0.22      0.00      0.00     97.78


06:45:20 PM       all      2.07      0.00      0.38      0.03      0.00     97.52


06:45:24 PM       all      0.94      0.00      0.28      0.00      0.00     98.78


06:45:28 PM       all      1.56      0.00      0.22      0.00      0.00     98.22


06:45:32 PM       all      3.53      0.00      0.25      0.03      0.00     96.19


Average:          all      2.02      0.00      0.27      0.01      0.00     97.70

=> Related: : How to collect Linux system utilization data into a file

#9: mpstat - Multiprocessor Usage

The mpstat command displays activities for each available processor, processor 0 being the first one. mpstat -P ALL to display average CPU utilization per processor:
# mpstat -P ALL
Sample Output:

Linux 2.6.18-128.1.14.el5 (www03.nixcraft.in)	 	06/26/2009



06:48:11 PM  CPU   %user   %nice    %sys %iowait    %irq   %soft  %steal   %idle    intr/s


06:48:11 PM  all    3.50    0.09    0.34    0.03    0.01    0.17    0.00   95.86   1218.04


06:48:11 PM    0    3.44    0.08    0.31    0.02    0.00    0.12    0.00   96.04   1000.31


06:48:11 PM    1    3.10    0.08    0.32    0.09    0.02    0.11    0.00   96.28     34.93


06:48:11 PM    2    4.16    0.11    0.36    0.02    0.00    0.11    0.00   95.25      0.00


06:48:11 PM    3    3.77    0.11    0.38    0.03    0.01    0.24    0.00   95.46     44.80


06:48:11 PM    4    2.96    0.07    0.29    0.04    0.02    0.10    0.00   96.52     25.91


06:48:11 PM    5    3.26    0.08    0.28    0.03    0.01    0.10    0.00   96.23     14.98


06:48:11 PM    6    4.00    0.10    0.34    0.01    0.00    0.13    0.00   95.42      3.75


06:48:11 PM    7    3.30    0.11    0.39    0.03    0.01    0.46    0.00   95.69     76.89

=> Related: : Linux display each multiple SMP CPU processors utilization individually .

#10: pmap - Process Memory Usage

The command pmap report memory map of a process. Use this command to find out causes of memory bottlenecks.
# pmap -d PID
To display process memory information for pid # 47394, enter:
# pmap -d 47394
Sample Outputs:

47394:   /usr/bin/php-cgi


Address           Kbytes Mode  Offset           Device    Mapping


0000000000400000    2584 r-x-- 0000000000000000 008:00002 php-cgi


0000000000886000     140 rw--- 0000000000286000 008:00002 php-cgi


00000000008a9000      52 rw--- 00000000008a9000 000:00000   [ anon ]


0000000000aa8000      76 rw--- 00000000002a8000 008:00002 php-cgi


000000000f678000    1980 rw--- 000000000f678000 000:00000   [ anon ]


000000314a600000     112 r-x-- 0000000000000000 008:00002 ld-2.5.so


000000314a81b000       4 r---- 000000000001b000 008:00002 ld-2.5.so


000000314a81c000       4 rw--- 000000000001c000 008:00002 ld-2.5.so


000000314aa00000    1328 r-x-- 0000000000000000 008:00002 libc-2.5.so


000000314ab4c000    2048 ----- 000000000014c000 008:00002 libc-2.5.so


.....


......


..


00002af8d48fd000       4 rw--- 0000000000006000 008:00002 xsl.so


00002af8d490c000      40 r-x-- 0000000000000000 008:00002 libnss_files-2.5.so


00002af8d4916000    2044 ----- 000000000000a000 008:00002 libnss_files-2.5.so


00002af8d4b15000       4 r---- 0000000000009000 008:00002 libnss_files-2.5.so


00002af8d4b16000       4 rw--- 000000000000a000 008:00002 libnss_files-2.5.so


00002af8d4b17000  768000 rw-s- 0000000000000000 000:00009 zero (deleted)


00007fffc95fe000      84 rw--- 00007ffffffea000 000:00000   [ stack ]


ffffffffff600000    8192 ----- 0000000000000000 000:00000   [ anon ]


mapped: 933712K    writeable/private: 4304K    shared: 768000K

The last line very important:

• mapped: 933712K total amount of memory mapped to files
• writeable/private: 4304K the amount of private address space
• shared: 768000K the amount of address space this process is sharing with others

=> Related: : Linux find the memory used by a program / process using pmap command

#11 and #12: netstat and ss - Network Statistics

The command netstat displayes network connections, routing tables, interface statistics, masquerade connections, and multicast memberships. ss command is used to dump socket statistics. It allows showing information similar to netstat. See the following resources about ss and netstat commands:

• ss: Display Linux TCP / UDP Network and Socket Information
• Get Detailed Information About Particular IP address Connections Using netstat Command

#13: iptraf - Real-time Network Statistics

The iptraf command is onteractive colorful IP LAN monitor. It is an ncurses-based IP LAN monitor that generates various network statistics including TCP info, UDP counts, ICMP and OSPF information, Ethernet load info, node stats, IP checksum errors, and others. It can provide the following info in easy to read format:

• Network traffic statistics by TCP connection
• IP traffic statistics by network interface
• Network traffic statistics by protocol
• Network traffic statistics by TCP/UDP port and by packet size
• Network traffic statistics by Layer2 address

Fig.02: General interface statistics: IP traffic statistics by network interface

Fig.03 Network traffic statistics by TCP connection

#14: tcpdump - Detailed Network Traffic Analysis

The tcpdump is simple command that dump traffic on a network. However, you need good understanding of TCP/IP protocol to utilize this tool. For.e.g to display traffic info about DNS, enter:
# tcpdump -i eth1 'udp port 53'
To display all IPv4 HTTP packets to and from port 80, i.e. print only packets that contain data, not, for example, SYN and FIN packets and ACK-only packets, enter:
# tcpdump 'tcp port 80 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)'
To display all FTP session to 202.54.1.5, enter:
# tcpdump -i eth1 'dst 202.54.1.5 and (port 21 or 20'
To display all HTTP session to 192.168.1.5:
# tcpdump -ni eth0 'dst 192.168.1.5 and tcp and port http'
Use wireshark to view detailed information about files, enter:
# tcpdump -n -i eth1 -s 0 -w output.txt src or dst port 80

#15: strace - System Calls

Trace system calls and signals. This is useful for debugging webserver and other server problems. See how to use to trace the process and see What it is doing.

#16: /Proc file system - Various Kernel Statistics

/proc file system provides detailed information about various hardware devices and other Linux kernel information. See Linux kernel /proc documentations for further details. Common /proc examples:
# cat /proc/cpuinfo
# cat /proc/meminfo
# cat /proc/zoneinfo
# cat /proc/mounts

17#: Nagios - Server And Network Monitoring

Nagios is a popular open source computer system and network monitoring application software. You can easily monitor all your hosts, network equipment and services. It can send alert when things go wrong and again when they get better. FAN is "Fully Automated Nagios". FAN goals are to provide a Nagios installation including most tools provided by the Nagios Community. FAN provides a CDRom image in the standard ISO format, making it easy to easilly install a Nagios server. Added to this, a wide bunch of tools are including to the distribution, in order to improve the user experience around Nagios.

18#: Cacti - Web-based Monitioring Tool

Cacti is a complete network graphing solution designed to harness the power of RRDTool's data storage and graphing functionality. Cacti provides a fast poller, advanced graph templating, multiple data acquisition methods, and user management features out of the box. All of this is wrapped in an intuitive, easy to use interface that makes sense for LAN-sized installations up to complex networks with hundreds of devices. It can provide data about network, CPU, memory, logged in users, Apache, DNS servers and much more. See how to install and configure Cacti network graphing tool under CentOS / RHEL.

#19: KDE System Guard - Real-time Systems Reporting and Graphing

KSysguard is a network enabled task and system monitor application for KDE desktop. This tool can be run over ssh session. It provides lots of features such as a client/server architecture that enables monitoring of local and remote hosts. The graphical front end uses so-called sensors to retrieve the information it displays. A sensor can return simple values or more complex information like tables. For each type of information, one or more displays are provided. Displays are organized in worksheets that can be saved and loaded independently from each other. So, KSysguard is not only a simple task manager but also a very powerful tool to control large server farms.

Fig.05 KDE System Guard {Image credit: Wikipedia}

See the KSysguard handbook for detailed usage.

#20: Gnome System Monitor - Real-time Systems Reporting and Graphing

The System Monitor application enables you to display basic system information and monitor system processes, usage of system resources, and file systems. You can also use System Monitor to modify the behavior of your system. Although not as powerful as the KDE System Guard, it provides the basic information which may be useful for new users:

• Displays various basic information about the computer's hardware and software.
• Linux Kernel version
• GNOME version
• Hardware
• Installed memory
• Processors and speeds
• System Status
• Currently available disk space
• Processes
• Memory and swap space
• Network usage
• File Systems
• Lists all mounted filesystems along with basic information about each.

Fig.06 The Gnome System Monitor application