SpringBoot常用配置列表

# =================================================================== 
# COMMON SPRING BOOT PROPERTIES 
# 
# This sample file is provided as a guideline. Do NOT copy it in its 
# entirety to your own application.               ^^^ 
# =================================================================== 
  
# ---------------------------------------- 
# CORE PROPERTIES 
# ---------------------------------------- 
  
# BANNER 
banner.charset=UTF-8 # banner file encoding 
banner.location=classpath:banner.txt # banner file location 
  
# SPRING CONFIG (ConfigFileApplicationListener) 
spring.config.name= # config file name (default to 'application') 
spring.config.location= # location of config file 
  
# PROFILES 
spring.profiles.active= # comma list of active profiles 
spring.profiles.include= # unconditionally activate the specified comma separated profiles 
  
# APPLICATION SETTINGS (SpringApplication) 
spring.main.sources= # sources (class name, package name or XML resource location) to include 
spring.main.web-environment= # detect by default 
spring.main.show-banner=true 
spring.main....= # see class for all properties 
  
# ADMIN (SpringApplicationAdminJmxAutoConfiguration) 
spring.application.admin.enabled=false # enable admin features for the application 
spring.application.admin.jmx-name=org.springframework.boot:type=Admin,name=SpringApplication # JMX name of the application admin MBean 
  
# OUTPUT 
spring.output.ansi.enabled=detect # Configure the ANSI output ("detect", "always", "never") 
  
# LOGGING 
logging.path=/var/logs 
logging.file=myapp.log 
logging.config= # location of config file (default classpath:logback.xml for logback) 
logging.level.*= # levels for loggers, e.g. "logging.level.org.springframework=DEBUG" (TRACE, DEBUG, INFO, WARN, ERROR, FATAL, OFF) 
  
# IDENTITY (ContextIdApplicationContextInitializer) 
spring.application.name= 
spring.application.index= 
  
# EMBEDDED SERVER CONFIGURATION (ServerProperties) 
server.port=8080 #配置程序端口，默认为8080
server.address= # bind to a specific NIC 
server.session-timeout= # session timeout in seconds 用户会话session过期时间，以秒为单位
server.context-parameters.*= # Servlet context init parameters, e.g. server.context-parameters.a=alpha 
server.context-path= # the context path, defaults to '/'  配置访问路径，默认为/  context-path与contextPath相同
server.jsp-servlet.class-name=org.apache.jasper.servlet.JspServlet # The class name of the JSP servlet 
server.jsp-servlet.init-parameters.*= # Init parameters used to configure the JSP servlet 
server.jsp-servlet.registered=true # Whether or not the JSP servlet is registered 
server.servlet-path= # the servlet path, defaults to '/' 
server.display-name= # the display name of the application 
server.ssl.enabled=true # if SSL support is enabled 
server.ssl.client-auth= # want or need 
server.ssl.key-alias= 
server.ssl.ciphers= # supported SSL ciphers 
server.ssl.key-password= 
server.ssl.key-store= 
server.ssl.key-store-password= 
server.ssl.key-store-provider= 
server.ssl.key-store-type= 
server.ssl.protocol=TLS 
server.ssl.trust-store= 
server.ssl.trust-store-password= 
server.ssl.trust-store-provider= 
server.ssl.trust-store-type= 
server.tomcat.access-log-pattern= # log pattern of the access log 
server.tomcat.access-log-enabled=false # is access logging enabled 
server.tomcat.compression=off # is compression enabled (off, on, or an integer content length limit)  Tomcat是否开启压缩，默认为关闭off
server.tomcat.compressable-mime-types=text/html,text/xml,text/plain # comma-separated list of mime types that Tomcat will compress 
server.tomcat.internal-proxies=10\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\ 
        192\\.168\\.\\d{1,3}\\.\\d{1,3}|\\ 
        169\\.254\\.\\d{1,3}\\.\\d{1,3}|\\ 
        127\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\ 
        172\\.1[6-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\ 
        172\\.2[0-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\ 
        172\\.3[0-1]{1}\\.\\d{1,3}\\.\\d{1,3} # regular expression matching trusted IP addresses 
server.tomcat.protocol-header=x-forwarded-proto # front end proxy forward header 
server.tomcat.port-header= # front end proxy port header 
server.tomcat.remote-ip-header=x-forwarded-for 
server.tomcat.basedir=/tmp # base dir (usually not needed, defaults to tmp) 
server.tomcat.background-processor-delay=30; # in seconds 
server.tomcat.max-http-header-size= # maximum size in bytes of the HTTP message header 
server.tomcat.max-threads = 0 # number of threads in protocol handler 
server.tomcat.uri-encoding = UTF-8 # character encoding to use for URL decoding  配置Tomcat编码，默认为UTF-8
server.undertow.access-log-enabled=false # if access logging is enabled 
server.undertow.access-log-pattern=common # log pattern of the access log 
server.undertow.access-log-dir=logs # access logs directory 
server.undertow.buffer-size= # size of each buffer in bytes 
server.undertow.buffers-per-region= # number of buffer per region 
server.undertow.direct-buffers=false # allocate buffers outside the Java heap 
server.undertow.io-threads= # number of I/O threads to create for the worker 
server.undertow.worker-threads= # number of worker threads 
  
# SPRING MVC (WebMvcProperties) 
spring.mvc.locale= # set fixed locale, e.g. en_UK 
spring.mvc.date-format= # set fixed date format, e.g. dd/MM/yyyy 
spring.mvc.favicon.enabled=true 
spring.mvc.message-codes-resolver-format= # PREFIX_ERROR_CODE / POSTFIX_ERROR_CODE 
spring.mvc.ignore-default-model-on-redirect=true # If the the content of the "default" model should be ignored redirects 
spring.view.prefix= # MVC view prefix 
spring.view.suffix= # ... and suffix 
  
# SPRING RESOURCES HANDLING (ResourceProperties) 
spring.resources.cache-period= # cache timeouts in headers sent to browser 
spring.resources.add-mappings=true # if default mappings should be added 
  
# MULTIPART (MultipartProperties) 
multipart.enabled=true 
multipart.file-size-threshold=0 # Threshold after which files will be written to disk. 
multipart.location= # Intermediate location of uploaded files. 
multipart.max-file-size=1Mb # Max file size. 
multipart.max-request-size=10Mb # Max request size. 
  
# SPRING HATEOAS (HateoasProperties) 
spring.hateoas.apply-to-primary-object-mapper=true # if the primary mapper should also be configured 
  
# HTTP encoding (HttpEncodingProperties) 
spring.http.encoding.charset=UTF-8 # the encoding of HTTP requests/responses 
spring.http.encoding.enabled=true # enable http encoding support 
spring.http.encoding.force=true # force the configured encoding 
  
# HTTP message conversion 
spring.http.converters.preferred-json-mapper= # the preferred JSON mapper to use for HTTP message conversion. Set to "gson" to force the use of Gson when both it and Jackson are on the classpath. 
  
# HTTP response compression (GzipFilterProperties) 
spring.http.gzip.buffer-size= # size of the output buffer in bytes 
spring.http.gzip.deflate-compression-level= # the level used for deflate compression (0-9) 
spring.http.gzip.deflate-no-wrap= # noWrap setting for deflate compression (true or false) 
spring.http.gzip.enabled=true # enable gzip filter support 
spring.http.gzip.excluded-agents= # comma-separated list of user agents to exclude from compression 
spring.http.gzip.exclude-agent-patterns= # comma-separated list of regular expression patterns to control user agents excluded from compression 
spring.http.gzip.exclude-paths= # comma-separated list of paths to exclude from compression 
spring.http.gzip.exclude-path-patterns= # comma-separated list of regular expression patterns to control the paths that are excluded from compression 
spring.http.gzip.methods= # comma-separated list of HTTP methods for which compression is enabled 
spring.http.gzip.mime-types= # comma-separated list of MIME types which should be compressed 
spring.http.gzip.excluded-mime-types= # comma-separated list of MIME types to exclude from compression 
spring.http.gzip.min-gzip-size= # minimum content length required for compression to occur 
spring.http.gzip.vary= # Vary header to be sent on responses that may be compressed 
  
# JACKSON (JacksonProperties) 
spring.jackson.date-format= # Date format string (e.g. yyyy-MM-dd HH:mm:ss), or a fully-qualified date format class name (e.g. com.fasterxml.jackson.databind.util.ISO8601DateFormat) 
spring.jackson.property-naming-strategy= # One of the constants on Jackson's PropertyNamingStrategy (e.g. CAMEL_CASE_TO_LOWER_CASE_WITH_UNDERSCORES) or the fully-qualified class name of a PropertyNamingStrategy subclass 
spring.jackson.deserialization.*= # see Jackson's DeserializationFeature 
spring.jackson.generator.*= # see Jackson's JsonGenerator.Feature 
spring.jackson.joda-date-time-format= # Joda date time format string 
spring.jackson.mapper.*= # see Jackson's MapperFeature 
spring.jackson.parser.*= # see Jackson's JsonParser.Feature 
spring.jackson.serialization.*= # see Jackson's SerializationFeature 
spring.jackson.serialization-inclusion= # Controls the inclusion of properties during serialization (see Jackson's JsonInclude.Include) 
  
# THYMELEAF (ThymeleafAutoConfiguration) 
spring.thymeleaf.check-template-location=true 
spring.thymeleaf.prefix=classpath:/templates/ 
spring.thymeleaf.excluded-view-names= # comma-separated list of view names that should be excluded from resolution 
spring.thymeleaf.view-names= # comma-separated list of view names that can be resolved 
spring.thymeleaf.suffix=.html 
spring.thymeleaf.mode=HTML5 
spring.thymeleaf.enabled=true # enable MVC view resolution 
spring.thymeleaf.encoding=UTF-8 
spring.thymeleaf.content-type=text/html # ;charset=<encoding> is added 
spring.thymeleaf.cache=true # set to false for hot refresh 
  
# FREEMARKER (FreeMarkerAutoConfiguration) 
spring.freemarker.allow-request-override=false 
spring.freemarker.cache=true 
spring.freemarker.check-template-location=true 
spring.freemarker.charset=UTF-8 
spring.freemarker.content-type=text/html 
spring.freemarker.enabled=true # enable MVC view resolution 
spring.freemarker.expose-request-attributes=false 
spring.freemarker.expose-session-attributes=false 
spring.freemarker.expose-spring-macro-helpers=false 
spring.freemarker.prefix= 
spring.freemarker.request-context-attribute= 
spring.freemarker.settings.*= 
spring.freemarker.suffix=.ftl 
spring.freemarker.template-loader-path=classpath:/templates/ # comma-separated list 
spring.freemarker.view-names= # whitelist of view names that can be resolved 
  
# GROOVY TEMPLATES (GroovyTemplateAutoConfiguration) 
spring.groovy.template.cache=true 
spring.groovy.template.charset=UTF-8 
spring.groovy.template.check-template-location=true # check that the templates location exists 
spring.groovy.template.configuration.*= # See GroovyMarkupConfigurer 
spring.groovy.template.content-type=text/html 
spring.groovy.template.enabled=true # enable MVC view resolution 
spring.groovy.template.prefix=classpath:/templates/ 
spring.groovy.template.suffix=.tpl 
spring.groovy.template.view-names= # whitelist of view names that can be resolved 
  
# VELOCITY TEMPLATES (VelocityAutoConfiguration) 
spring.velocity.allow-request-override=false 
spring.velocity.cache=true 
spring.velocity.check-template-location=true 
spring.velocity.charset=UTF-8 
spring.velocity.content-type=text/html 
spring.velocity.date-tool-attribute= 
spring.velocity.enabled=true # enable MVC view resolution 
spring.velocity.expose-request-attributes=false 
spring.velocity.expose-session-attributes=false 
spring.velocity.expose-spring-macro-helpers=false 
spring.velocity.number-tool-attribute= 
spring.velocity.prefer-file-system-access=true # prefer file system access for template loading 
spring.velocity.prefix= 
spring.velocity.properties.*= 
spring.velocity.request-context-attribute= 
spring.velocity.resource-loader-path=classpath:/templates/ 
spring.velocity.suffix=.vm 
spring.velocity.toolbox-config-location= # velocity Toolbox config location, for example "/WEB-INF/toolbox.xml" 
spring.velocity.view-names= # whitelist of view names that can be resolved 
  
# MUSTACHE TEMPLATES (MustacheAutoConfiguration) 
spring.mustache.cache=true 
spring.mustache.charset=UTF-8 
spring.mustache.check-template-location=true 
spring.mustache.content-type=UTF-8 
spring.mustache.enabled=true # enable MVC view resolution 
spring.mustache.prefix= 
spring.mustache.suffix=.html 
spring.mustache.view-names= # whitelist of view names that can be resolved 
  
# JERSEY (JerseyProperties) 
spring.jersey.type=servlet # servlet or filter 
spring.jersey.init= # init params 
spring.jersey.filter.order= 
  
# INTERNATIONALIZATION (MessageSourceAutoConfiguration) 
spring.messages.basename=messages 
spring.messages.cache-seconds=-1 
spring.messages.encoding=UTF-8 
  
  
# SECURITY (SecurityProperties) 
security.user.name=user # login username 
security.user.password= # login password 
security.user.role=USER # role assigned to the user 
security.require-ssl=false # advanced settings ... 
security.enable-csrf=false 
security.basic.enabled=true 
security.basic.realm=Spring 
security.basic.path= # /** 
security.basic.authorize-mode= # ROLE, AUTHENTICATED, NONE 
security.filter-order=0 
security.headers.xss=false 
security.headers.cache=false 
security.headers.frame=false 
security.headers.content-type=false 
security.headers.hsts=all # none / domain / all 
security.sessions=stateless # always / never / if_required / stateless 
security.ignored= # Comma-separated list of paths to exclude from the default secured paths 
  
# OAuth2 client (OAuth2ClientProperties 
spring.oauth2.client.client-id= # OAuth2 client id 
spring.oauth2.client.client-secret= # OAuth2 client secret. A random secret is generated by default 
  
# OAuth2 SSO (OAuth2SsoProperties 
spring.oauth2.sso.filter-order= # Filter order to apply if not providing an explicit WebSecurityConfigurerAdapter 
spring.oauth2.sso.login-path= # Path to the login page, i.e. the one that triggers the redirect to the OAuth2 Authorization Server 
  
# DATASOURCE (DataSourceAutoConfiguration & DataSourceProperties) 
spring.datasource.name= # name of the data source 
spring.datasource.initialize=true # populate using data.sql 
spring.datasource.schema= # a schema (DDL) script resource reference 
spring.datasource.data= # a data (DML) script resource reference 
spring.datasource.sql-script-encoding= # a charset for reading SQL scripts 
spring.datasource.platform= # the platform to use in the schema resource (schema-${platform}.sql) 
spring.datasource.continue-on-error=false # continue even if can't be initialized 
spring.datasource.separator=; # statement separator in SQL initialization scripts 
spring.datasource.driver-class-name= # JDBC Settings... 
spring.datasource.url= 
spring.datasource.username= 
spring.datasource.password= 
spring.datasource.jndi-name= # For JNDI lookup (class, url, username & password are ignored when set) 
spring.datasource.max-active=100 # Advanced configuration... 
spring.datasource.max-idle=8 
spring.datasource.min-idle=8 
spring.datasource.initial-size=10 
spring.datasource.validation-query= 
spring.datasource.test-on-borrow=false 
spring.datasource.test-on-return=false 
spring.datasource.test-while-idle= 
spring.datasource.time-between-eviction-runs-millis= 
spring.datasource.min-evictable-idle-time-millis= 
spring.datasource.max-wait= 
spring.datasource.jmx-enabled=false # Export JMX MBeans (if supported) 
  
# DAO (PersistenceExceptionTranslationAutoConfiguration) 
spring.dao.exceptiontranslation.enabled=true 
  
# MONGODB (MongoProperties) 
spring.data.mongodb.host= # the db host 
spring.data.mongodb.port=27017 # the connection port (defaults to 27107) 
spring.data.mongodb.uri=mongodb://localhost/test # connection URL 
spring.data.mongodb.database= 
spring.data.mongodb.authentication-database= 
spring.data.mongodb.grid-fs-database= 
spring.data.mongodb.username= 
spring.data.mongodb.password= 
spring.data.mongodb.repositories.enabled=true # if spring data repository support is enabled 
  
# JPA (JpaBaseConfiguration, HibernateJpaAutoConfiguration) 
spring.jpa.properties.*= # properties to set on the JPA connection 
spring.jpa.open-in-view=true 
spring.jpa.show-sql=true 
spring.jpa.database-platform= 
spring.jpa.database= 
spring.jpa.generate-ddl=false # ignored by Hibernate, might be useful for other vendors 
spring.jpa.hibernate.naming-strategy= # naming classname 
spring.jpa.hibernate.ddl-auto= # defaults to create-drop for embedded dbs 
spring.data.jpa.repositories.enabled=true # if spring data repository support is enabled 
  
# JTA (JtaAutoConfiguration) 
spring.jta.log-dir= # transaction log dir 
spring.jta.*= # technology specific configuration 
  
# ATOMIKOS 
spring.jta.atomikos.connectionfactory.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool 
spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag=true # Whether or not to ignore the transacted flag when creating session 
spring.jta.atomikos.connectionfactory.local-transaction-mode=false # Whether or not local transactions are desired 
spring.jta.atomikos.connectionfactory.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread 
spring.jta.atomikos.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool 
spring.jta.atomikos.connectionfactory.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit. 
spring.jta.atomikos.connectionfactory.max-pool-size=1 # The maximum size of the pool 
spring.jta.atomikos.connectionfactory.min-pool-size=1 # The minimum size of the pool 
spring.jta.atomikos.connectionfactory.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit. 
spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory # The unique name used to identify the resource during recovery 
spring.jta.atomikos.datasource.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool 
spring.jta.atomikos.datasource.default-isolation-level= # Default isolation level of connections provided by the pool 
spring.jta.atomikos.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection 
spring.jta.atomikos.datasource.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread 
spring.jta.atomikos.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool 
spring.jta.atomikos.datasource.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit. 
spring.jta.atomikos.datasource.max-pool-size=1 # The maximum size of the pool 
spring.jta.atomikos.datasource.min-pool-size=1 # The minimum size of the pool 
spring.jta.atomikos.datasource.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit. 
spring.jta.atomikos.datasource.test-query= # SQL query or statement used to validate a connection before returning it 
spring.jta.atomikos.datasource.unique-resource-name=dataSource # The unique name used to identify the resource during recovery 
  
# BITRONIX 
spring.jta.bitronix.connectionfactory.acquire-increment=1 # Number of connections to create when growing the pool 
spring.jta.bitronix.connectionfactory.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired 
spring.jta.bitronix.connectionfactory.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool 
spring.jta.bitronix.connectionfactory.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions 
spring.jta.bitronix.connectionfactory.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted 
spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically 
spring.jta.bitronix.connectionfactory.cache-producers-consumers=true # Whether or not produces and consumers should be cached 
spring.jta.bitronix.connectionfactory.defer-connection-release=true # Whether or not the provider can run many transactions on the same connection and supports transaction interleaving 
spring.jta.bitronix.connectionfactory.ignore-recovery-failures=false # Whether or not recovery failures should be ignored 
spring.jta.bitronix.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool 
spring.jta.bitronix.connectionfactory.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit 
spring.jta.bitronix.connectionfactory.min-pool-size=0 # The minimum size of the pool 
spring.jta.bitronix.connectionfactory.password= # The password to use to connect to the JMS provider 
spring.jta.bitronix.connectionfactory.share-transaction-connections=false #  Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction 
spring.jta.bitronix.connectionfactory.test-connections=true # Whether or not connections should be tested when acquired from the pool 
spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 # The postion that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE) 
spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory # The unique name used to identify the resource during recovery 
spring.jta.bitronix.connectionfactory.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources 
spring.jta.bitronix.connectionfactory.user= # The user to use to connect to the JMS provider 
spring.jta.bitronix.datasource.acquire-increment=1 # Number of connections to create when growing the pool 
spring.jta.bitronix.datasource.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired 
spring.jta.bitronix.datasource.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool 
spring.jta.bitronix.datasource.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions 
spring.jta.bitronix.datasource.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted 
spring.jta.bitronix.datasource.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically 
spring.jta.bitronix.datasource.cursor-holdability= # The default cursor holdability for connections 
spring.jta.bitronix.datasource.defer-connection-release=true # Whether or not the database can run many transactions on the same connection and supports transaction interleaving 
spring.jta.bitronix.datasource.enable-jdbc4-connection-test # Whether or not Connection.isValid() is called when acquiring a connection from the pool 
spring.jta.bitronix.datasource.ignore-recovery-failures=false # Whether or not recovery failures should be ignored 
spring.jta.bitronix.datasource.isolation-level= # The default isolation level for connections 
spring.jta.bitronix.datasource.local-auto-commit # The default auto-commit mode for local transactions 
spring.jta.bitronix.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection 
spring.jta.bitronix.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool 
spring.jta.bitronix.datasource.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit 
spring.jta.bitronix.datasource.min-pool-size=0 # The minimum size of the pool 
spring.jta.bitronix.datasource.prepared-statement-cache-size=0 # The target size of the prepared statement cache. 0 disables the cache 
spring.jta.bitronix.datasource.share-transaction-connections=false #  Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction 
spring.jta.bitronix.datasource.test-query # SQL query or statement used to validate a connection before returning it 
spring.jta.bitronix.datasource.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE) 
spring.jta.bitronix.datasource.unique-name=dataSource # The unique name used to identify the resource during recovery 
spring.jta.bitronix.datasource.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources 
  
# SOLR (SolrProperties) 
spring.data.solr.host=http://127.0.0.1:8983/solr 
spring.data.solr.zk-host= 
spring.data.solr.repositories.enabled=true # if spring data repository support is enabled 
  
# ELASTICSEARCH (ElasticsearchProperties) 
spring.data.elasticsearch.cluster-name= # The cluster name (defaults to elasticsearch) 
spring.data.elasticsearch.cluster-nodes= # The address(es) of the server node (comma-separated; if not specified starts a client node) 
spring.data.elasticsearch.properties.*= # Additional properties used to configure the client 
spring.data.elasticsearch.repositories.enabled=true # if spring data repository support is enabled 
  
# DATA REST (RepositoryRestConfiguration) 
spring.data.rest.base-path= # base path against which the exporter should calculate its links 
  
# FLYWAY (FlywayProperties) 
flyway.*= # Any public property available on the auto-configured `Flyway` object 
flyway.check-location=false # check that migration scripts location exists 
flyway.locations=classpath:db/migration # locations of migrations scripts 
flyway.schemas= # schemas to update 
flyway.init-version= 1 # version to start migration 
flyway.init-sqls= # SQL statements to execute to initialize a connection immediately after obtaining it 
flyway.sql-migration-prefix=V 
flyway.sql-migration-suffix=.sql 
flyway.enabled=true 
flyway.url= # JDBC url if you want Flyway to create its own DataSource 
flyway.user= # JDBC username if you want Flyway to create its own DataSource 
flyway.password= # JDBC password if you want Flyway to create its own DataSource 
  
# LIQUIBASE (LiquibaseProperties) 
liquibase.change-log=classpath:/db/changelog/db.changelog-master.yaml 
liquibase.check-change-log-location=true # check the change log location exists 
liquibase.contexts= # runtime contexts to use 
liquibase.default-schema= # default database schema to use 
liquibase.drop-first=false 
liquibase.enabled=true 
liquibase.url= # specific JDBC url (if not set the default datasource is used) 
liquibase.user= # user name for liquibase.url 
liquibase.password= # password for liquibase.url 
  
# JMX 
spring.jmx.default-domain= # JMX domain name 
spring.jmx.enabled=true # Expose MBeans from Spring 
spring.jmx.mbean-server=mBeanServer # MBeanServer bean name 
  
# RABBIT (RabbitProperties) 
spring.rabbitmq.addresses= # connection addresses (e.g. myhost:9999,otherhost:1111) 
spring.rabbitmq.dynamic=true # create an AmqpAdmin bean 
spring.rabbitmq.host= # connection host 
spring.rabbitmq.port= # connection port 
spring.rabbitmq.password= # login password 
spring.rabbitmq.requested-heartbeat= # requested heartbeat timeout, in seconds; zero for none 
spring.rabbitmq.ssl.enabled=false # enable SSL support 
spring.rabbitmq.ssl.key-store= # path to the key store that holds the SSL certificate 
spring.rabbitmq.ssl.key-store-password= # password used to access the key store 
spring.rabbitmq.ssl.trust-store= # trust store that holds SSL certificates 
spring.rabbitmq.ssl.trust-store-password= # password used to access the trust store 
spring.rabbitmq.username= # login user 
spring.rabbitmq.virtual-host= # virtual host to use when connecting to the broker 
  
# REDIS (RedisProperties) 
spring.redis.database= # database name 
spring.redis.host=localhost # server host 
spring.redis.password= # server password 
spring.redis.port=6379 # connection port 
spring.redis.pool.max-idle=8 # pool settings ... 
spring.redis.pool.min-idle=0 
spring.redis.pool.max-active=8 
spring.redis.pool.max-wait=-1 
spring.redis.sentinel.master= # name of Redis server 
spring.redis.sentinel.nodes= # comma-separated list of host:port pairs 
spring.redis.timeout= # connection timeout in milliseconds 
  
# ACTIVEMQ (ActiveMQProperties) 
spring.activemq.broker-url=tcp://localhost:61616 # connection URL 
spring.activemq.user= 
spring.activemq.password= 
spring.activemq.in-memory=true # broker kind to create if no broker-url is specified 
spring.activemq.pooled=false 
  
# HornetQ (HornetQProperties) 
spring.hornetq.mode= # connection mode (native, embedded) 
spring.hornetq.host=localhost # hornetQ host (native mode) 
spring.hornetq.port=5445 # hornetQ port (native mode) 
spring.hornetq.embedded.enabled=true # if the embedded server is enabled (needs hornetq-jms-server.jar) 
spring.hornetq.embedded.server-id= # auto-generated id of the embedded server (integer) 
spring.hornetq.embedded.persistent=false # message persistence 
spring.hornetq.embedded.data-directory= # location of data content (when persistence is enabled) 
spring.hornetq.embedded.queues= # comma-separated queues to create on startup 
spring.hornetq.embedded.topics= # comma-separated topics to create on startup 
spring.hornetq.embedded.cluster-password= # customer password (randomly generated by default) 
  
# JMS (JmsProperties) 
spring.jms.jndi-name= # JNDI location of a JMS ConnectionFactory 
spring.jms.pub-sub-domain= # false for queue (default), true for topic 
  
# Email (MailProperties) 
spring.mail.host=smtp.acme.org # mail server host 
spring.mail.port= # mail server port 
spring.mail.username= 
spring.mail.password= 
spring.mail.default-encoding=UTF-8 # encoding to use for MimeMessages 
spring.mail.properties.*= # properties to set on the JavaMail session 
spring.mail.jndi-name= # JNDI location of a Mail Session 
  
# SPRING BATCH (BatchProperties) 
spring.batch.job.names=job1,job2 
spring.batch.job.enabled=true 
spring.batch.initializer.enabled=true 
spring.batch.schema= # batch schema to load 
spring.batch.table-prefix= # table prefix for all the batch meta-data tables 
  
# SPRING CACHE (CacheProperties) 
spring.cache.type= # generic, ehcache, hazelcast, infinispan, jcache, redis, guava, simple, none 
spring.cache.cache-names= # cache names to create on startup 
spring.cache.ehcache.config= # location of the ehcache configuration 
spring.cache.hazelcast.config= # location of the hazelcast configuration 
spring.cache.infinispan.config= # location of the infinispan configuration 
spring.cache.jcache.config= # location of jcache configuration 
spring.cache.jcache.provider= # fully qualified name of the CachingProvider implementation to use 
spring.cache.guava.spec= # guava specs 
  
# AOP 
spring.aop.auto= 
spring.aop.proxy-target-class= 
  
# FILE ENCODING (FileEncodingApplicationListener) 
spring.mandatory-file-encoding= # Expected character encoding the application must use 
  
# SPRING SOCIAL (SocialWebAutoConfiguration) 
spring.social.auto-connection-views=true # Set to true for default connection views or false if you provide your own 
  
# SPRING SOCIAL FACEBOOK (FacebookAutoConfiguration) 
spring.social.facebook.app-id= # your application's Facebook App ID 
spring.social.facebook.app-secret= # your application's Facebook App Secret 
  
# SPRING SOCIAL LINKEDIN (LinkedInAutoConfiguration) 
spring.social.linkedin.app-id= # your application's LinkedIn App ID 
spring.social.linkedin.app-secret= # your application's LinkedIn App Secret 
  
# SPRING SOCIAL TWITTER (TwitterAutoConfiguration) 
spring.social.twitter.app-id= # your application's Twitter App ID 
spring.social.twitter.app-secret= # your application's Twitter App Secret 
  
# SPRING MOBILE SITE PREFERENCE (SitePreferenceAutoConfiguration) 
spring.mobile.sitepreference.enabled=true # enabled by default 
  
# SPRING MOBILE DEVICE VIEWS (DeviceDelegatingViewResolverAutoConfiguration) 
spring.mobile.devicedelegatingviewresolver.enabled=true # disabled by default 
spring.mobile.devicedelegatingviewresolver.enable-fallback= # enable support for fallback resolution, default to false. 
spring.mobile.devicedelegatingviewresolver.normal-prefix= 
spring.mobile.devicedelegatingviewresolver.normal-suffix= 
spring.mobile.devicedelegatingviewresolver.mobile-prefix=mobile/ 
spring.mobile.devicedelegatingviewresolver.mobile-suffix= 
spring.mobile.devicedelegatingviewresolver.tablet-prefix=tablet/ 
spring.mobile.devicedelegatingviewresolver.tablet-suffix= 
  
# ---------------------------------------- 
# DEVTOOLS PROPERTIES 
# ---------------------------------------- 
  
# DEVTOOLS (DevToolsProperties) 
spring.devtools.restart.enabled=true # enable automatic restart 
spring.devtools.restart.exclude= # patterns that should be excluding for triggering a full restart 
spring.devtools.restart.poll-interval= # amount of time (in milliseconds) to wait between polling for classpath changes 
spring.devtools.restart.quiet-period= # amount of quiet time (in milliseconds) requited without any classpath changes before a restart is triggered 
spring.devtools.restart.trigger-file= # name of a specific file that when changed will trigger the restart 
spring.devtools.livereload.enabled=true # enable a livereload.com compatible server 
spring.devtools.livereload.port=35729 # server port. 
  
# REMOTE DEVTOOLS (RemoteDevToolsProperties) 
spring.devtools.remote.context-path=/.~~spring-boot!~ # context path used to handle the remote connection 
spring.devtools.remote.debug.enabled=true # enable remote debug support 
spring.devtools.remote.debug.local-port=8000 # local remote debug server port 
spring.devtools.remote.restart.enabled=true # enable remote restart 
spring.devtools.remote.secret= # a shared secret required to establish a connection 
spring.devtools.remote.secret-header-name=X-AUTH-TOKEN # HTTP header used to transfer the shared secret 
  
# ---------------------------------------- 
# ACTUATOR PROPERTIES 
# ---------------------------------------- 
  
# MANAGEMENT HTTP SERVER (ManagementServerProperties) 
management.port= # defaults to 'server.port' 
management.address= # bind to a specific NIC 
management.context-path= # default to '/' 
management.add-application-context-header= # default to true 
management.security.enabled=true # enable security 
management.security.role=ADMIN # role required to access the management endpoint 
management.security.sessions=stateless # session creating policy to use (always, never, if_required, stateless) 
  
# PID FILE (ApplicationPidFileWriter) 
spring.pidfile= # Location of the PID file to write 
  
# ENDPOINTS (AbstractEndpoint subclasses) 
endpoints.autoconfig.id=autoconfig 
endpoints.autoconfig.sensitive=true 
endpoints.autoconfig.enabled=true 
endpoints.beans.id=beans 
endpoints.beans.sensitive=true 
endpoints.beans.enabled=true 
endpoints.configprops.id=configprops 
endpoints.configprops.sensitive=true 
endpoints.configprops.enabled=true 
endpoints.configprops.keys-to-sanitize=password,secret,key # suffix or regex 
endpoints.dump.id=dump 
endpoints.dump.sensitive=true 
endpoints.dump.enabled=true 
endpoints.enabled=true # enable all endpoints 
endpoints.env.id=env 
endpoints.env.sensitive=true 
endpoints.env.enabled=true 
endpoints.env.keys-to-sanitize=password,secret,key # suffix or regex 
endpoints.health.id=health 
endpoints.health.sensitive=true 
endpoints.health.enabled=true 
endpoints.health.mapping.*= # mapping of health statuses to HttpStatus codes 
endpoints.health.time-to-live=1000 
endpoints.info.id=info 
endpoints.info.sensitive=false 
endpoints.info.enabled=true 
endpoints.mappings.enabled=true 
endpoints.mappings.id=mappings 
endpoints.mappings.sensitive=true 
endpoints.metrics.id=metrics 
endpoints.metrics.sensitive=true 
endpoints.metrics.enabled=true 
endpoints.shutdown.id=shutdown 
endpoints.shutdown.sensitive=true 
endpoints.shutdown.enabled=false 
endpoints.trace.id=trace 
endpoints.trace.sensitive=true 
endpoints.trace.enabled=true 
  
# ENDPOINTS CORS CONFIGURATION (MvcEndpointCorsProperties) 
endpoints.cors.allow-credentials= # set whether user credentials are support. When not set, credentials are not supported. 
endpoints.cors.allowed-origins= # comma-separated list of origins to allow. * allows all origins. When not set, CORS support is disabled. 
endpoints.cors.allowed-methods= # comma-separated list of methods to allow. * allows all methods. When not set, defaults to GET. 
endpoints.cors.allowed-headers= # comma-separated list of headers to allow in a request. * allows all headers. 
endpoints.cors.exposed-headers= # comma-separated list of headers to include in a response. 
endpoints.cors.max-age=1800 # how long, in seconds, the response from a pre-flight request can be cached by clients. 
  
# HEALTH INDICATORS (previously health.*) 
management.health.db.enabled=true 
management.health.elasticsearch.enabled=true 
management.health.elasticsearch.indices=  # comma-separated index names 
management.health.elasticsearch.response-timeout=100 # the time, in milliseconds, to wait for a response from the cluster 
management.health.diskspace.enabled=true 
management.health.diskspace.path=. 
management.health.diskspace.threshold=10485760 
management.health.jms.enabled=true 
management.health.mail.enabled=true 
management.health.mongo.enabled=true 
management.health.rabbit.enabled=true 
management.health.redis.enabled=true 
management.health.solr.enabled=true 
management.health.status.order=DOWN, OUT_OF_SERVICE, UNKNOWN, UP 
  
# MVC ONLY ENDPOINTS 
endpoints.jolokia.path=/jolokia 
endpoints.jolokia.sensitive=true 
endpoints.jolokia.enabled=true # when using Jolokia 
  
# JMX ENDPOINT (EndpointMBeanExportProperties) 
endpoints.jmx.enabled=true # enable JMX export of all endpoints 
endpoints.jmx.domain= # the JMX domain, defaults to 'org.springboot' 
endpoints.jmx.unique-names=false 
endpoints.jmx.static-names= 
  
# JOLOKIA (JolokiaProperties) 
jolokia.config.*= # See Jolokia manual 
  
# REMOTE SHELL 
shell.auth=simple # jaas, key, simple, spring 
shell.command-refresh-interval=-1 
shell.command-path-patterns= # classpath*:/commands/**, classpath*:/crash/commands/** 
shell.config-path-patterns= # classpath*:/crash/* 
shell.disabled-commands=jpa*,jdbc*,jndi* # comma-separated list of commands to disable 
shell.disabled-plugins=false # don't expose plugins 
shell.ssh.enabled= # ssh settings ... 
shell.ssh.key-path= 
shell.ssh.port= 
shell.telnet.enabled= # telnet settings ... 
shell.telnet.port= 
shell.auth.jaas.domain= # authentication settings ... 
shell.auth.key.path= 
shell.auth.simple.user.name= 
shell.auth.simple.user.password= 
shell.auth.spring.roles= 
  
# METRICS EXPORT (MetricExportProperties) 
spring.metrics.export.enabled=true # flag to disable all metric exports (assuming any MetricWriters are available) 
spring.metrics.export.delay-millis=5000 # delay in milliseconds between export ticks 
spring.metrics.export.send-latest=true # flag to switch off any available optimizations based on not exporting unchanged metric values 
spring.metrics.export.includes= # list of patterns for metric names to include 
spring.metrics.export.excludes= # list of patterns for metric names to exclude. Applied after the includes 
spring.metrics.export.redis.aggregate-key-pattern= # pattern that tells the aggregator what to do with the keys from the source repository 
spring.metrics.export.redis.prefix=spring.metrics # prefix for redis repository if active 
spring.metrics.export.redis.key=keys.spring.metrics # key for redis repository export (if active) 
spring.metrics.export.triggers.*= # specific trigger properties per MetricWriter bean name 
  
# SENDGRID (SendGridAutoConfiguration) 
spring.sendgrid.username= # SendGrid account username 
spring.sendgrid.password= # SendGrid account password 
spring.sendgrid.proxy.host= # SendGrid proxy host 
spring.sendgrid.proxy.port= # SendGrid proxy port 
  
# GIT INFO 
spring.git.properties= # resource ref to generated git info properties file 
Table of Content