`

avaya

阅读更多
查看开长途没有
cha sta 8328 8328
cor  1 不能打  2 能打长途

查看掩饰号码
cha pub 0/1/2

查看出局:
cha  pub 4 ext 分机
F3保存

查看入局
cha inc tru 1/2(分别2个组)

F7--下一页  F8 上一页

4600 IVR组

save  t  保存

山东AVAYA设备
172.29.10.170
dadmin
dadmin01
sat
dadmin01
w2ktt

测试通道
status trunk 1
跟踪分机状态
list trace station 4427
查看板卡信息
list configuration stations
查看板卡状态
list cor
查看异地出具的归属
cha station ****
更改cor以后就可以异地出局
test bo 1a08
test bo 1a09
test bo 1a10
test bo 1a11ch
查看板卡组状态
st sig 3
st sig 4
st sig 5
st sig 6

status aesvcs link 检查aes连接情况

list hunt-group 查看ivr组
change inc-call-handling-trmt trunk-group 4 更改呼入ivr组指向

list configuration carrier 板卡号 查看板卡配置信息
list configuration all 查看所有板卡配置
status media-processor all 查看所有media板卡
status media-processor board 7a13 查看板卡信息
test board 7a13 测试板卡状态
display errors 查看错误
display alarms 查看告警
list ipserver-interface 查看ip卡
list ip-interface all 查看c-lan板卡,media-pro板卡
list public-unknown-numbering 查看出局号
change public-unknown-numbering ext-digits 8402 0 更改出局号
monitor traffic trunk-groups 查看满线路情况
display sys cu 查看系统license
status trunk x 查看中继x各端口的状态

disp feature-access 查看外拨出局总号
disp dialplan analysis 查看外拨出局

display inc-call-handling-trmt trunk-group 4 查看入局落入分机组
cha inc-call-handling-trmt trunk-group 修改落入分机组,修改直拨电话使用

dup sta 3801 start 3701 board 03a07 count 100 批量添加100个分机在某一个分机板上
list sta 5771 count 10 查看从5771开始的10个分机

cha cor 11查看time of day chart
list partition-route-table查看路由表
list route-pattern 查看路由trunk表

配置ipsi卡
前提G650安装完毕加电
IPSI板卡插到G650网关的第一个槽位(支持热插拔)
笔记本连接到IPSI板卡前端的Service口(固定IP地址192.11.13.6)
Windows界面点击开始菜单-运行-cmd进入dos
ping 192.11.13.6如果可以ping通
telnet 192.11.13.6 回车
[IPSI]: ipsilogin
Login: craft
Password: serv1ces
[IPADMIN]: set control interface 198.152.254.203 255.255.255.0
[IPADMIN]: show control interface
[IPADMIN]: exit
telnet 192.11.13.6 回车
[IPSI]: ipsilogin
Login: craft
Password: serv1ces
[IPADMIN]: set control gateway 198.152.254.1
[IPADMIN]: show control gateway
[IPADMIN]: exit
添加cabinet
add cabinet *
Cabinet Layout:G650-rack-mount-stack

change system-parameters ipserver-interface允许IPSI控制端口网络
IPSI Control of Port Networks: enabled

add ipserver-interface PNnumber

List ipserver-interface查看IPSI注册状态

change system-parameters maintenance修改系统维护参数

change node-names ip
添加media板卡地址和名称
change circuit-packs *查看设备识别情况

音频流压缩
cha ip-network-region 1
==================================================================================
                               IP NETWORK REGION
  Region: 1
Location: 1       Authoritative Domain:
    Name: Main
MEDIA PARAMETERS                Intra-region IP-IP Direct Audio: yes
      Codec Set: 1              Inter-region IP-IP Direct Audio: yes
   UDP Port Min: 2048                      IP Audio Hairpinning? n
   UDP Port Max: 65535
DIFFSERV/TOS PARAMETERS                  RTCP Reporting Enabled? y
Call Control PHB Value: 46      RTCP MONITOR SERVER PARAMETERS
        Audio PHB Value: 46       Use Default Server Parameters? y
        Video PHB Value: 26
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 6
        Audio 802.1p Priority: 6
        Video 802.1p Priority: 5      AUDIO RESOURCE RESERVATION PARAMETERS
H.323 IP ENDPOINTS                                       RSVP Enabled? n
  H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
   Keep-Alive Interval (sec): 5
            Keep-Alive Count: 5                                      
=======================================================================================
cha ip-codec-set 1
=======================================================================================
                          IP Codec Set

    Codec Set: 1

    Audio        Silence      Frames   Packet
    Codec        Suppression  Per Pkt  Size(ms)
1: G.729             n         2        20
2:
3:
4:
5:
6:
7:


     Media Encryption
1: none
2:
3:
========================================================================================

配置trunk
1. 接入中继线
2. 添加中继板卡
add ds1 *******
name:*****
bit rate:2.048
line coding:hdb3
signaling mode:isdn-pri
country protocol:18
interface companding:alaw
idle code:01010110

3. test bo 中继板卡号,检查通畅情况(busyout 中继板卡号,release 中继板卡号)
4. add signal-group **
==================================================================================
SIGNALING GROUP

Group Number: 4              Group Type: isdn-pri
                    Associated Signaling? y          Max number of NCA TSC: 0
                       Primary D-Channel: 01A1316     Max number of CA TSC: 0
                                                   Trunk Group for NCA TSC:
       Trunk Group for Channel Selection:
      TSC Supplementary Service Protocol: a          Network Call Transfer? n
==================================================================================
5. cha trunk **,添加中继板卡号
6. status trunk **,查看trunk状态


配置IPtrunk
1. 接入clan板卡
add ip-interface 1a05
========add ip-interface 1a05=========================================================
IP INTERFACES


                  Type: C-LAN
                  Slot: 01A05
           Code/Suffix: TN799  D
             Node Name: clan(a05)
            IP Address: 172.29 .10 .175
           Subnet Mask: 255.255.255.0                            Link: 1
       Gateway Address: 172.29 .10 .1
  Enable Ethernet Port? y                       Allow H.323 Endpoints? y
        Network Region: 1                        Allow H.248 Gateways? y
                  VLAN: n                         Gatekeeper Priority: 5

Target socket load and Warning level: 400
       Receive Buffer TCP Window Size: 8320
                                ETHERNET OPTIONS
                  Auto? n
                 Speed: 100Mbps
                Duplex: Full
========================================================================================

2. 添加数据模块
add data-module 3100
========add data-module 3100============================================================
                              DATA MODULE

  Data Extension: 3100            Name: TO AES_1
            Type: ethernet
            Port: 01A0517
            Link: 1




Network uses 1's for Broadcast Addresses? y
========================================================================================

3. 添加signal-group
add signal-group 7
========add signal-group 7==============================================================
                                SIGNALING GROUP

Group Number: 7              Group Type: h.323
                           Remote Office? n          Max number of NCA TSC: 0
                                     SBS? n           Max number of CA TSC: 0
          IP Video? n                              Trunk Group for NCA TSC:
       Trunk Group for Channel Selection: 14
      TSC Supplementary Service Protocol: a          Network Call Transfer? n
                         T303 Timer(sec): 10

   Near-end Node Name: clan(a05)             Far-end Node Name: RemoteClan
Near-end Listen Port: 6510                Far-end Listen Port: 6510
                                        Far-end Network Region: 1
         LRQ Required? n                 Calls Share IP Signaling Connection? y
         RRQ Required? n
                                             Bypass If IP Threshold Exceeded? n
                                                      H.235 Annex H Required? n
         DTMF over IP: out-of-band            Direct IP-IP Audio Connections? y
Link Loss Delay Timer(sec): 90                         IP Audio Hairpinning? n
Enable Layer 3 Test? y                          Interworking Message: PROGress
                                         DCP/Analog Bearer Capability: 3.1kHz
========================================================================================
busy signaling-gr 7
rel  signaling-gr 7

4. 添加ip-codec-set
===add ip-codec-set 1 ===================================================================
                          IP Codec Set

    Codec Set: 1

    Audio        Silence      Frames   Packet
    Codec        Suppression  Per Pkt  Size(ms)
1: G.729             n         2        20
2:
3:
4:
5:
6:
7:                           
=========================================================================================

5. 添加trunk
===add trunk 14==========================================================================
                                TRUNK GROUP

Group Number: 14                   Group Type: isdn          CDR Reports: y
  Group Name: To_150_YiDong               COR: 1        TN: 1        TAC: 714
   Direction: two-way        Outgoing Display? n         Carrier Medium: H.323
Dial Access? n              Busy Threshold: 255  Night Service:
Queue Length: 0
Service Type: tie                   Auth Code? n
                                              Member Assignment Method: auto
                                                       Signaling Group: 7
                                                     Number of Members: 30

      Group Type: isdn

TRUNK PARAMETERS
         Codeset to Send Display: 6     Codeset to Send National IEs: 6
                                        Charge Advice: none
  Supplementary Service Protocol: a     Digit Handling (in/out): enbloc/enbloc


                                                   Digital Loss Group: 18
Incoming Calling Number - Delete:     Insert:                 Format:

Disconnect Supervision - In? y  Out? y
Answer Supervision Timeout: 0

TRUNK FEATURES
          ACA Assignment? n            Measured: both
                                 Internal Alert? n        Maintenance Tests? y
                               Data Restriction? n     NCA-TSC Trunk Member:
                                      Send Name: n      Send Calling Number: y
            Used for DCS? n                            Send EMU Visitor CPN? n
   Suppress # Outpulsing? n    Format: public
                                             UUI IE Treatment: service-provider

                                                 Replace Restricted Numbers? n
                                                Replace Unavailable Numbers? n
                                                      Send Connected Number: n
Network Call Redirection: none                    Hold/Unhold Notifications? n
             Send UUI IE? y                    Modify Tandem Calling Number? n
               Send UCID? n
Send Codeset 6/7 LAI IE? y
==========================================================================================

重置分机
busyou station ****
release station ****

配置分机内呼
cha aar an

不同pbx之间分机转呼
cha uniform-dial 0
cha aar an

设置分机之间的监听
cha cor *
修改cor:
Can Be Service Observed?是否被监听
Can Be A Service Observer?是否监听
修改监听码:
cha feature-access-codes

change system-parameters features
修改:
service obsevring:warning tone打成n

ip-trunk如果不输送主叫号码,cha trunk 1中的 Send Calling Number: n没有设置成y


====================命令解锁================================
1. 查看在线用户
status logins
2. reset log **

==========================================================
内部分机互通

cha aar an

              Dialed            Total        Route    Call      Node
              String          Min    Max    Pattern   Type     Number

        186                    11     11     p2       aar
        188                    11     11     p2       aar
        189                    11     11     p2       aar
        3200                   4      4      9        aar
        59                     4      4      100      aar
        61                     4      4      100      aar
        65                     4      4      20       aar
        77                     4      4      100      aar
        82                     4      4      20       aar
        841                    4      4      20       aar
        842                    4      4      20       aar
        843                    4      4      20       aar
=====================================================================
list uniform-dialplan                                                  Page

                      UNIFORM DIAL PLAN TABLE

Matching Pattern   Len   Del   Insert Digits   Net    Conv   Node Num

3200                4     0                    aar     n
59                  4     0                    aar     n
61                  4     0                    aar     n
65                  4     0                    aar     n
77                  4     0                    aar     n
82                  4     0                    aar     n
841                 4     0                    aar     n
842                 4     0                    aar     n
843                 4     0                    aar     n
844                 4     0                    aar     n
845                 4     0                    aar     n
846                 4     0                    aar     n
847                 4     0                    aar     n
8480                4     0                    aar     n
8481                4     0                    aar     n


查看电话统计信息
list bcms trunk 6 day

添加mediapro板卡



F1退出,F3保存
分享到:
评论

相关推荐

    Avaya Workplace Windows-3.32.0.75.27

    《Avaya Workplace Windows 3.32.0.75.27:高效协作与通信的新篇章》 Avaya Workplace Windows 3.32.0.75.27是一款专为Windows用户设计的企业级协作工具,它集成了丰富的通信功能,旨在提升团队效率和工作流程的...

    avaya基本管理手册

    本产品组合以坚如磐石的 Avaya Communication Manager 应用程序为动力,与Avaya 媒体服务器、 Avaya 媒体网关、 Avaya Integrated Management (网络管理工具)和通 讯设备相辅相成。 利用 Avaya Communication ...

    AVAYA IP Office System Status Application操作中文手册.pdf

    《AVAYA IP Office System Status Application操作中文手册》是针对AVAYA公司的IP Office系统状态应用的详细指导文档。此手册适用于那些需要管理和监控AVAYA IP Office通信系统的用户和管理员,旨在帮助他们有效地...

    Avaya_SIP_设置说明.pdf

    【Avaya SIP 设置说明】 Avaya Aura™ Communication Manager 是Avaya公司的一款先进的统一通信平台,专为大型企业和组织设计,旨在提供高效、灵活且可扩展的通信解决方案。它支持多种通信协议,包括SIP(Session ...

    Avaya呼叫中心AES配置

    Avaya AES(Application Enablement Services)配置是针对Avaya呼叫中心解决方案的重要环节,它允许系统集成第三方应用程序,如CRM(客户关系管理)软件,以实现更高效、更个性化的客户服务。以下是对AES配置过程的...

    avaya8730硬件安装

    ### Avaya 8730 硬件安装知识点详解 #### 一、Avaya S8700 系列服务器简介 Avaya S8700 系列服务器是 Avaya 公司推出的一款高性能通信平台,适用于企业级部署环境。该系列服务器集成了先进的通信技术和强大的处理...

    avaya G450的说明及安装

    Avaya G450 媒体网关安装和说明 Avaya G450 媒体网关是一个功能强大的融合联网设备,它将 IP 语音通信网关、高级 IP WAN 路由器以及高性能的 LAN 交换机集成到一个紧凑的(3U)模块化机箱里。Avaya 推出此网关意在...

    Avaya One-x attendant WEBLM installer

    《Avaya One-X Attendant WEBLM Installer》是Avaya公司为用户提供的一款话务台管理工具的Web版本安装程序。此程序主要用于管理和配置Avaya ONE-X Attendant系统,它集成了Licensing Administration功能,使得管理员...

    Avaya one-X Communicator Suite v6.2.12.04-SP12

    《Avaya one-X Communicator Suite v6.2.12.04-SP12:全方位解析企业级软电话解决方案》 Avaya one-X Communicator Suite是一款专为IT专业人士设计的企业级软电话软件,它提供了丰富的通信功能,使得用户可以在个人...

    AVAYA IP Office Manager软件中文手册.pdf

    1. AVAYA IP Office Manager软件是一款专为管理AVAYA IP Office系统而设计的软件工具。IP Office Manager允许用户配置和维护IP电话系统,它提供了一个图形化的用户界面来实现系统设置,包括呼叫控制、用户管理、系统...

    Avaya one-X™ Deskphone SIP 9608/9611G IP 电话用户手册

    Avaya one-X™ Deskphone SIP 9608/9611G IP电话用户手册内容涵盖了该系列IP电话的基本操作、安全使用、保修与版权声明等多个方面。以下对这些知识点进行详细说明。 首先,关于产品介绍和操作指南部分,用户手册会...

    TSAPIClient,用于连接测试AVAYA AES,TSAPI接口

    TSAPIClient是一款专门设计用于与Avaya AES(Avaya Aura System Administrator)系统进行交互的工具,它通过TSAPI(Telephony Services Application Programming Interface)接口来实现。TSAPI是Avaya提供的一种应用...

    AVAYA JTAPI SDK 6.3

    AVAYA JTAPI SDK 6.3 是一款专为Avaya通信系统开发的应用程序接口,它允许开发者通过Java编程语言来实现对Avaya通信设备和系统的控制与管理。JTAPI,全称为Java Telephony Application Programming Interface,是...

    Avaya B5800 Branch Gateway

    标题:Avaya B5800 分支网关 描述:Avaya B5800 语音网关技术使用说明,介绍了如何通过该设备在企业分支环境中实现通信生存能力,提供了一个灵活、经济高效的协作解决方案。 核心知识点: 1. **Avaya B5800 分支...

    avaya-coverage path功能将打入电话遇忙无人接听转接其他分机或手机设置说明.doc

    Avaya 是一家知名的通信解决方案提供商,其产品广泛应用于企业级通信系统。在Avaya的通信系统中,"_coverage path_" 是一个重要的功能,它允许管理员配置电话系统的呼转策略,以便在来电无法直接接通时(例如,分机...

    AVAYA2420电话使用说明(中文PDF)

    ### AVAYA 2420 数字电话机使用说明关键知识点 #### 一、产品概述 - **名称**:AVAYA 2420 数字电话机 - **功能定位**:专为企业级环境设计,适用于办公室、呼叫中心等场景。 - **特点**:具备良好的通话质量、丰富...

    AVAYA 命令全集及解释

    AVAYA是一家知名的通信系统提供商,其产品广泛应用于企业级通信解决方案。在AVAYA的系统中,了解和掌握各种命令是管理和维护网络的关键。"AVAYA 命令全集及解释"是一个非常宝贵的资源,它包含了AVAYA系统中所有可用...

    AVAYA告警手册

    《AVAYA告警手册:深入解析与应用》 标题中的“AVAYA告警手册”直指核心,这是关于AVAYA系统告警管理的详尽指南。AVAYA是一家全球领先的通信技术公司,其产品和服务覆盖了企业级电话系统、统一通信、联络中心解决...

Global site tag (gtag.js) - Google Analytics