CentOS5下源码编译安装Apache-2.2.23 + PHP-5.2.17

一、安装所需：

注：我自己的安装环境为centos 5.5 64

1、类库：

wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.13.1.tar.gz
wget http://downloads.sourceforge.net/mcrypt/libmcrypt-2.5.8.tar.gz
wget http://downloads.sourceforge.net/mcrypt/mcrypt-2.6.8.tar.gz
wget http://pecl.php.net/get/memcache-2.2.6.tgz
wget http://downloads.sourceforge.net/mhash/mhash-0.9.9.9.tar.gz
wget http://bart.eaccelerator.net/source/0.9.6.1/eaccelerator-0.9.6.1.tar.bz2
wget http://pecl.php.net/get/PDO_MYSQL-1.0.2.tgz
wget http://blog.s135.com/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
wget http://pecl.php.net/get/imagick-2.3.0.tgz

2、Apache2.2.23下载地址：点击打开链接


二、安装apache

    cd /usr/local/src

    tar -zxvf httpd-2.2.23

    cd httpd-2.2.23

    ./configure -prefix=/usr/local/apache -enable-module=so

    make
     make install


在终端中输入：/usr/local/apache/bin/apachectl start 启动apache服务器
                   输入：/usr/local/apache/bin/apachectl restart  重新启动服务器

添加mod_rewrite模块

      cd /usr/local/src/httpd-2.2.23/modules/mappers/

         /usr/local/apache/bin/apxs -c mod_rewrite.c

        /usr/local/apache/bin/apxs -i -a -n mod_rewrite mod_rewrite.la




三、安装PHP

tar zxvf libiconv-1.13.1.tar.gz
cd libiconv-1.13.1/
./configure --prefix=/usr/local
make
make install

cd ../




tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
cd ../../





tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../





ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config





tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../





tar zxvf php-5.2.17.tar.gz
gzip -cd php-5.2.17-fpm-0.5.14.diff.gz | patch -d php-5.2.17 -p1
cd php-5.2.17/


./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --with-apxs2=/usr/local/apache/bin/apxs --with-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl --with-xmlrpc --enable-zip --enable-soap


make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/php/etc/php.ini
cd ../





tar zxvf memcache-2.2.6.tgz
cd memcache-2.2.6/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config
make
make install
cd ../





tar jxvf eaccelerator-0.9.6.1.tar.bz2
cd eaccelerator-0.9.6.1/
/usr/local/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/php/bin/php-config
make
make install
cd ../





tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config --with-pdo-mysql=/usr/local/mysql
make
make install
cd ../





tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make
make install
cd ../





tar zxvf imagick-2.3.0.tgz
cd imagick-2.3.0/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config
make
make install
cd ../





修改php.ini文件
　　手工修改：查找/usr/local/php/etc/php.ini中的extension_dir = "./"
　　修改为extension_dir = "/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/"
　　并在此行后增加以下几行，然后保存：
extension = "memcache.so"
extension = "pdo_mysql.so"
extension = "imagick.so"


　　再查找output_buffering = Off
　　修改为output_buffering = On



配置eAccelerator加速PHP：
mkdir -p /home/eaccelerator_cache
vim /usr/local/php/etc/php.ini


按shift+g键跳到配置文件的最末尾，加上以下配置信息：
引用
[eaccelerator]
zend_extension="/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="64"
eaccelerator.cache_dir="/home/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="3600"
eaccelerator.shm_prune_period="3600"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"





创建php-fpm配置文件（php-fpm是为PHP打的一个FastCGI管理补丁，可以平滑变更php.ini配置而无需重启php-cgi）：
　　在/usr/local/php/etc/目录中创建php-fpm.conf文件：
rm -f /usr/local/php/etc/php-fpm.conf
vi /usr/local/php/etc/php-fpm.conf





输入以下内容：


<?xml version="1.0" ?>
<configuration>
   All relative paths in this config are relative to php's install prefix
   <section name="global_options">
     Pid file
     <value name="pid_file">/usr/local/php/logs/php-fpm.pid</value>
     Error log file
     <value name="error_log">/usr/local/php/logs/php-fpm.log</value>
     Log level
     <value name="log_level">notice</value>
     When this amount of php processes exited with SIGSEGV or SIGBUS ...
     <value name="emergency_restart_threshold">10</value>
     ... in a less than this interval of time, a graceful restart will be initiated.
     Useful to work around accidental curruptions in accelerator's shared memory.
     <value name="emergency_restart_interval">1m</value>
     Time limit on waiting child's reaction on signals from master
     <value name="process_control_timeout">5s</value>
     Set to 'no' to debug fpm
     <value name="daemonize">yes</value>
   </section>
   <workers>
     <section name="pool">
       Name of pool. Used in logs and stats.
       <value name="name">default</value>
       Address to accept fastcgi requests on.
       Valid syntax is 'ip.ad.re.ss:port' or just 'port' or '/path/to/unix/socket'
       <value name="listen_address">127.0.0.1:9000</value>
       <value name="listen_options">
         Set listen(2) backlog
         <value name="backlog">-1</value>
         Set permissions for unix socket, if one used.
         In Linux read/write permissions must be set in order to allow connections from web server.
         Many BSD-derrived systems allow connections regardless of permissions.
         <value name="owner"></value>
         <value name="group"></value>
         <value name="mode">0666</value>
       </value>
       Additional php.ini defines, specific to this pool of workers.
       <value name="php_defines">
         <value name="sendmail_path">/usr/sbin/sendmail -t -i</value>
         <value name="display_errors">0</value>
       </value>
       Unix user of processes
       <value name="user">www</value>
       Unix group of processes
       <value name="group">www</value>
       Process manager settings
       <value name="pm">
         Sets style of controling worker process count.
         Valid values are 'static' and 'apache-like'
         <value name="style">static</value>
         Sets the limit on the number of simultaneous requests that will be served.
         Equivalent to Apache MaxClients directive.
         Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
         Used with any pm_style.
         <value name="max_children">128</value>
         Settings group for 'apache-like' pm style
         <value name="apache_like">
           Sets the number of server processes created on startup.
           Used only when 'apache-like' pm_style is selected
           <value name="StartServers">20</value>
           Sets the desired minimum number of idle server processes.
           Used only when 'apache-like' pm_style is selected
           <value name="MinSpareServers">5</value>
           Sets the desired maximum number of idle server processes.
           Used only when 'apache-like' pm_style is selected
           <value name="MaxSpareServers">35</value>
         </value>
       </value>
       The timeout (in seconds) for serving a single request after which the worker process will be terminated
       Should be used when 'max_execution_time' ini option does not stop script execution for some reason
       '0s' means 'off'
       <value name="request_terminate_timeout">0s</value>
       The timeout (in seconds) for serving of single request after which a php backtrace will be dumped to slow.log file
       '0s' means 'off'
       <value name="request_slowlog_timeout">0s</value>
       The log file for slow requests
       <value name="slowlog">logs/slow.log</value>
       Set open file desc rlimit
       <value name="rlimit_files">65535</value>
       Set max core size rlimit
       <value name="rlimit_core">0</value>
       Chroot to this directory at the start, absolute path
       <value name="chroot"></value>
       Chdir to this directory at the start, absolute path
       <value name="chdir"></value>
       Redirect workers' stdout and stderr into main error log.
       If not set, they will be redirected to /dev/null, according to FastCGI specs
       <value name="catch_workers_output">yes</value>
       How much requests each process should execute before respawn.
       Useful to work around memory leaks in 3rd party libraries.
       For endless request processing please specify 0
       Equivalent to PHP_FCGI_MAX_REQUESTS
       <value name="max_requests">1024</value>
       Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.
       Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)
       Makes sense only with AF_INET listening socket.
       <value name="allowed_clients">127.0.0.1</value>
       Pass environment variables like LD_LIBRARY_PATH
       All $VARIABLEs are taken from current environment
       <value name="environment">
         <value name="HOSTNAME">$HOSTNAME</value>
         <value name="PATH">/usr/local/bin:/usr/bin:/bin</value>
         <value name="TMP">/tmp</value>
         <value name="TMPDIR">/tmp</value>
         <value name="TEMP">/tmp</value>
         <value name="OSTYPE">$OSTYPE</value>
         <value name="MACHTYPE">$MACHTYPE</value>
         <value name="MALLOC_CHECK_">2</value>
       </value>
     </section>
   </workers>
</configuration>


四、配置httpd.conf

      vim /usr/local/apache/conf/httpd.conf

        ServerRoot：apache的安装目录

        Listen： apache监听的端口

       搜索LoadModule，如果有下面两句

      LoadModule php5_module        modules/libphp5.so

     LoadModule rewrite_module     modules/mod_rewrite.so

     则将前面的注释删除掉，如果没有这两句，则添加上去

    搜索AddType

    添加：AddType application/x-httpd-php .php .phtml



添加以下配置：

<VirtualHost *:80>


    DocumentRoot /home/htdocs/www    --你的文档的根目录。默认情况下，所有的请求从这个目录进行应答。
     ServerName test.yalv023.com   --访问域名
         <Directory /home/htdocs/www >   --用于封装一组指令，使之仅对某个目录及其子目录生效。
                 Options FollowSymLinks 
                 AllowOverride All  
                 order allow,deny
                 Allow from all
         </Directory>
</VirtualHost>


在<IfModule dir_module>

里面添加 index.php

至此配置完成.




注：

可能遇到的问题

httpd: Syntax error on line 54 of /usr/share/apache-2.2.11/conf/httpd.conf: Can't locate API module structure `mod_rewrite_module' in file /usr/share/apache-2.2.11/modules/mod_rewrite.so: /usr/share/apache-2.2.11/modules/mod_rewrite.so: undefined symbol: mod_rewrite_module

修改 httpd.conf，将

LoadModule mod_rewrite_module modules/mod_rewrite.so

改为

LoadModule mod_rewrite modules/mod_rewrite.so
如果出现这个错误
Syntax error on line 329 of /usr/local/apache2/conf/httpd.conf:
Can`t loacte API module staructure `mod_rewrite_module` in file
/usr/local/apache2/modules/mod_rewrite.so:/usr/local/apache2/lib/libapr-
0.so.0:undefined symbol:mod_rewrite_module
修改http.conf
原来：httpd.conf里面写的mod_rewrite_module
改成 rewrite_module

如果重启apache出现这个错误module rewrite_module is built-in and can`t be loaded
表示模块是内建的，不用再调入,注释掉
#LoadModule rewrite_module modules/mod_rewrite.so