Abstract
The purpose of this techdoc is to provide some sample scenarios for using a topic in a cluster and to perform publish and subscribe (Pub/Sub) operations on that topic, from the local queue manager and the remote queue managers.
Content
This technote contains the following sections:
| Testcase configuration details |
The scenarios described here use 3 Queue Managers in an MQ cluster:
Cluster Name: NEWCLUSTER
QM1 - full repository
QM2 - full repository
QM3 - partial repository
Clustered Topic Object:
Name: TESTTOPIC
Topic String: PUBSUBV7
Local to QMgr: QM1
The following 2 commands will create the above clustered topic:
runmqsc QM1
define topic(TESTTOPIC) topicstr(PUBSUBV7) cluster(NEWCLUSTER)
The definition of the clustered topic will be pushed (fanned out) to all the Queue Managers in the cluster.
In contrast, the definition of a clustered queue is ONLY provided to the queue manager that is asking for it.
In QM1 (where the topic is local) the display of the topic shows:
display topic(TESTTOPIC)
2 : display topic(TESTTOPIC)
AMQ8633: Display topic details.
TOPIC(TESTTOPIC) TYPE(LOCAL)
TOPICSTR(PUBSUBV7) DESCR( )
CLUSTER(NEWCLUSTER) DURSUB(ASPARENT)
PUB(ASPARENT) SUB(ASPARENT)
DEFPSIST(ASPARENT) DEFPRTY(ASPARENT)
DEFPRESP(ASPARENT) ALTDATE(2009-06-26)
ALTTIME(13.54.04) PMSGDLV(ASPARENT)
NPMSGDLV(ASPARENT) PUBSCOPE(ASPARENT)
SUBSCOPE(ASPARENT) PROXYSUB(FIRSTUSE)
WILDCARD(PASSTHRU) MDURMDL( )
MNDURMDL( )
In QM2 (where the topic is NOT local) the display of the topic shows:
display topic(TESTTOPIC)
1 : display topic(TESTTOPIC)
AMQ8147: WebSphere MQ object TESTTOPIC not found.
In QM2, we need to provide an additional qualifier: TYPE(CLUSTER), as follows:
display topic(TESTTOPIC) TYPE(CLUSTER)
2 : display topic(TESTTOPIC) TYPE(CLUSTER)
AMQ8633: Display topic details.
TOPIC(TESTTOPIC) TYPE(CLUSTER)
TOPICSTR(PUBSUBV7) DESCR( )
CLUSTER(NEWCLUSTER) CLUSQMGR(QM_ANGELILLO)
QMID(QM_ANGELILLO_2008-06-16_14.26.07)
DURSUB(ASPARENT) PUB(ASPARENT)
SUB(ASPARENT) DEFPSIST(ASPARENT)
DEFPRTY(ASPARENT) DEFPRESP(ASPARENT)
CLUSDATE(2009-06-26) CLUSTIME(13.54.04)
ALTDATE(2009-06-26) ALTTIME(13.54.04)
PMSGDLV(ASPARENT) NPMSGDLV(ASPARENT)
PUBSCOPE(ASPARENT) SUBSCOPE(ASPARENT)
PROXYSUB(FIRSTUSE) WILDCARD(PASSTHRU)
MDURMDL( ) MNDURMDL( )
)
An MQ Administrator is used in this technote to publish and subscribe to the topic.
In case that you want to use another userid, then review the following technote and provide to that user, the proper authority to publish and subscribe to the topic.
http://www.ibm.com/support/docview.wss?uid=swg27016153
Authorizations needed for non-mqm users to publish and subscribe to Topics in MQ V7
| Scenario 1: Publishing from QM1 (where the topic is local) - subscribing from all the Queue Managers |
We will be using the following MQ samples provided with the MQ installation:
amqspub topicString QMgr
amqssub topicString QMgr
NOTE:
When using these samples. do NOT use the single quotes to surround the topicString, because they will be considered as part of the topicString.
If there are no special characters in the topicString, then there is no need to surround the topicString with delimiters. It is safe to use double quotes, though:
Correct: amqspub topicString QMgr
Correct: amqspub "topicString" QMgr
Incorrect: amqspub 'topicString' QMgr
Login as an MQ Administrator.
Open 6 windows: 2 for QM1 (one pub, one sub), 3 for QM2 (3 subs with variations) and 1 for QM3 (sub)
First, subscribe to the topic string.
The amqssub waits for 30 seconds for a message. If one is received then it resets the 30 seconds timer. If not, then it terminates.
Thus, a suggestion is that you only type the commands in the 6 screens, but do not press Enter. Then, when all the commands are ready, then proceed quickly to press Enter in each window to activate them.
QM1 Window 1:
amqspub PUBSUBV7 QM1
QM2 Window 1: not using delimiters for the topic string (correct)
amqssub PUBSUBV7 QM2
QM2 Window 2: using double quotes as delimiters for the topic string (correct)
amqssub "PUBSUBV7" QM2
QM2 Window 3: using single quotes as delimiters for the topic string (incorrect)
amqssub 'PUBSUBV7' QM2
QM3 Window 1:
amqssub PUBSUBV7 QM3
Second, publish to the topic string from QM1 (the topic is local):
QM1 Window 1: Enter a brief text, such as: TEST followed by pressing Enter twice. The first Enter is to provide the TEST string, the second is to exit.
amqspub PUBSUBV7 QM1
Sample AMQSPUBA start
target topic is PUBSUBV7
TEST
Sample AMQSPUBA end
Notice that in all the subscribers windows (except one, when the single quotes were used) the output should reveal that the subscribers to the clustered topic were able to receive the message, even when the subscribers were in remote queue managers:
Sample AMQSSUBA start
Calling MQGET : 30 seconds wait time
message <TEST>
Calling MQGET : 30 seconds wait time
no more messages
Sample AMQSSUBA end
In the case when the single quotes were used notice that no messages were received.
Why? Because the string was not PUBSUBV7 (8 characters) but rather 'PUBSUBV7' (10 characters: the 8 for PUBSUBV7, one single quote at the beginning and one single quote at the end) and these strings are different.
$ amqssub 'PUBSUBV7' QM_FR1
Sample AMQSSUBA start
Calling MQGET : 30 seconds wait time
no more messages
Sample AMQSSUBA end
| Scenario 2: Publishing from QM2 (where the topic is NOT local) - subscribing from all the Queue Managers |
Let's repeat the scenario, with the variation that the publishing will be done from QM2 (which is not the queue manager where the topic is local).
The objective is to show that you can publish from a remote queue manager in the cluster,
Because the warning of not using single quotes was given already, we will use fewer windows and this will simplify the scenario. We will use only 4 windows: 1 for QM1 (sub), 2 for QM2 (one pub, one sub), 1 for QM3 (sub)
QM1 Window 1:
amqssub PUBSUBV7 QM1
QM2 Window 1:
amqssub PUBSUBV7 QM2
QM2 Window 2:
amqspub PUBSUBV7 QM2
QM3 Window 1:
amqssub PUBSUBV7 QM3
Second, publish to the topic string from QM2 (the topic is not local):
QM2 Window 2: Enter a brief text, such as: TEST2
amqspub PUBSUBV7 QM2
Sample AMQSPUBA start
target topic is PUBSUBV7
TEST2
Sample AMQSPUBA end
Notice that in all the subscribers windows the output should reveal that the subscribers to the clustered topic were able to receive the message, even when the publisher was in a remote queue manager (that is, where the topic was NOT a local topic).
Sample AMQSSUBA start
Calling MQGET : 30 seconds wait time
message <TEST2>
Calling MQGET : 30 seconds wait time
no more messages
Sample AMQSSUBA end
CAVEAT about runmqsc:
Please notice that runmqsc treats the double quotes and single quotes in a different manner than the amqspub and amqssub samples.
In runmqsc, ensure to use the single quotes when specifying a topic string.
Lowercase characters not contained within single quotation marks are folded to uppercase.
You cannot use double quotes (it gives a syntax error)
Example: the following topic string exists: sports/baseball
It is defined under a topic object. Notice that it is NOT shown with single quotes nor double quotes.
display topic(T1_CLUS)
1 : display topic(T1_CLUS)
AMQ8633: Display topic details.
TOPIC(T1_CLUS) TYPE(LOCAL)
TOPICSTR(sports/baseball) DESCR( )
CLUSTER(NEWCLUSTER) DURSUB(ASPARENT)
Notice these 3 different responses from runmqsc:
1: Using tpstatus with the topic string surrounded by single quotes: correct
display tpstatus('sports/baseball')
11 : display tpstatus('sports/baseball')
AMQ8754: Display topic status details.
TOPICSTR(sports/baseball) ADMIN(T1_CLUS)
MDURMDL(SYSTEM.DURABLE.MODEL.QUEUE)
MNDURMDL(SYSTEM.NDURABLE.MODEL.QUEUE)
DEFPSIST(NO) DEFPRTY(0)
DEFPRESP(ASYNC) DURSUB(YES)
PUB(ENABLED) SUB(ENABLED)
PMSGDLV(ALLDUR) NPMSGDLV(ALLAVAIL)
RETAINED(NO) PUBCOUNT(0)
SUBCOUNT(0) PUBSCOPE(ALL)
SUBSCOPE(ALL)
2: No quotes: incorrect
display tpstatus(sports/baseball)
13 : display tpstatus(sports/baseball)
Why? Because they will be folded to uppercase. Thus, above command is equivalent to:
display tpstatus(SPORTS/BASEBALL)
Furthermore, the topic strings are case sensitive. Thus, SPORTS/BASEBALL is indeed a topic string that has not been defined yet.
3: Double quotes: syntax error
display tpstatus("sports/baseball")
12 : display tpstatus("sports/baseball")
AMQ8405: Syntax error detected at or near end of command segment below:-
display tpstatus("
AMQ8427: Valid syntax for the MQSC command:
DISPLAY TPSTATUS( generic_topic_string )
| Looking at the TOPIC STATUS from QM1 and QM2 |
We will use the MQ utility "runmqsc" to display the status of the Topic in queue managers QM1 and QM2.
Looking at the TOPIC STATUS from QM1
This command will be run from QM1 (where the topic is local).
Open 5 windows: 3 for QM1 (one for runmqsc, one for pub, one for sub), 2 for QM2 (one pub, one sub).
There will be 2 subscribers (one local, one remote) and 2 publishers (one local, one remote)
QM1 Window 1:
runmqsc QM1
QM1 Window 2:
amqssub PUBSUBV7 QM1
QM1 Window 3:
amqspub PUBSUBV7 QM1
QM2 Window 1:
amqssub PUBSUBV7 QM2
QM2 Window 2:
amqspub PUBSUBV7 QM2
Notice the command to display the publishers will ONLY show the local publisher (the remote publisher is NOT shown)
display tpstatus('PUBSUBV7') type(pub)
1 : display tpstatus('PUBSUBV7') type(pub)
AMQ8754: Display topic status details.
TOPICSTR(PUBSUBV7) LPUBDATE( )
LPUBTIME( )
ACTCONN(414D5143514D5F414E47454C494C4C4F6606454A20005D01)
NUMPUBS(0)
Notice that both subscribers (local and remote) are shown.
display tpstatus('PUBSUBV7') type(sub)
2 : display tpstatus('PUBSUBV7') type(sub)
AMQ8754: Display topic status details.
TOPICSTR(PUBSUBV7)
SUBID(414D5120514D5F414E47454C494C4C4F6606454A20005E04)
SUBUSER(rivera) RESMDATE(2009-06-26)
RESMTIME(14:48:55) LMSGDATE( )
LMSGTIME( )
ACTCONN(414D5143514D5F414E47454C494C4C4F6606454A20005E01)
DURABLE(NO) SUBTYPE(API)
NUMMSGS(0)
AMQ8754: Display topic status details.
TOPICSTR(PUBSUBV7)
SUBID(414D5120514D5F414E47454C494C4C4F6606454A20001043)
SUBUSER(MUSR_MQADMIN) RESMDATE(2009-06-26)
RESMTIME(14:48:53) LMSGDATE( )
LMSGTIME( )
ACTCONN(000000000000000000000000000000000000000000000000)
DURABLE(YES) SUBTYPE(PROXY)
NUMMSGS(0)
You can use the information provided in ACTCONN to perform a further query to identify the application that is using that connection,
See the published technote: 1375536
http://www.ibm.com/support/docview.wss?uid=swg21375536
Identifying the name of an application that is subscribed to a topic
Looking at the TOPIC STATUS from QM2
This command will be run from QM2 (where the topic is not local).
Open 5 windows: 2 for QM1 (one for pub, one for sub), 3 for QM2 (one for runmqsc, one pub, one sub).
There will be 2 subscribers (one local, one remote) and 2 publishers (one local, one remote)
QM1 Window 1:
amqssub PUBSUBV7 QM1
QM1 Window 2:
amqspub PUBSUBV7 QM1
QM2 Window 1:
amqssub PUBSUBV7 QM2
QM2 Window 2:
amqspub PUBSUBV7 QM2
QM3 Window 4:
runmqsc QM2
Notice the command to display the publishers will ONLY show the local publisher (the remote publisher is NOT shown)
display tpstatus('PUBSUBV7') type(pub)
5 : display tpstatus('PUBSUBV7') type(pub)
AMQ8754: Display topic status details.
TOPICSTR(PUBSUBV7) LPUBDATE( )
LPUBTIME( )
ACTCONN(414D5143514D5F4652312020202020207106454A20005102
NUMPUBS(0)
Notice that both subscribers (local and remote) are shown.
display tpstatus('PUBSUBV7') type(sub)
4 : display tpstatus('PUBSUBV7') type(sub)
AMQ8754: Display topic status details.
TOPICSTR(PUBSUBV7)
SUBID(414D5120514D5F4652312020202020207106454A20005A04)
SUBUSER(rivera) RESMDATE(2009-06-26)
RESMTIME(15:14:31) LMSGDATE( )
LMSGTIME( )
ACTCONN(414D5143514D5F4652312020202020207106454A20005A01)
DURABLE(NO) SUBTYPE(API)
NUMMSGS(0)
AMQ8754: Display topic status details.
TOPICSTR(PUBSUBV7)
SUBID(414D5120514D5F4652312020202020207106454A20000F24)
SUBUSER(MUSR_MQADMIN) RESMDATE(2009-06-26)
RESMTIME(15:14:28) LMSGDATE( )
LMSGTIME( )
ACTCONN(000000000000000000000000000000000000000000000000)
DURABLE(YES) SUBTYPE(PROXY)
NUMMSGS(0)
相关推荐
The field of mechatronics (which is the ... The readers will have the latest information related to mechatronics, that contains the details of implementation, and the description of the test scenarios.
Upgrade from GRUB legacy to GRUB 2 Additional test case scenarios Triple boot Customize GRUB menu Edit /etc/default/grub Remove memtest from the menu Change titles in menu entries Change theme (boot ...
Building Your Next Big Thing with Google Cloud Platform shows you how to take advantage of the Google Cloud Platform technologies to build all kinds of cloud-hosted software and services for both ...
近似动态规划方法，百度apollo2.0系统里planning模块...（Optimal Trajectory Generation for Dynamic Street Scenarios in a Frene´t Frame Moritz Werling, Julius Ziegler, So¨ren Kammel, and Sebastian Thrun）
Now revised to reflect the innovations of Java 5.0, Goodrich and Tamassia’s Fourth Edition of Data Structures and Algorithms in Java continues to offer accessible coverage of fundamental data ...
- **发布/订阅** (Pub/Sub): 多个订阅者可以同时接收消息。 - **请求/响应** (Req/Resp): 请求者发送请求，等待响应者的回复。 **1.3 WebSphere MQ的原理** - **定义**: IBM WebSphere MQ是一种高性能的消息中间件...
The document is structured into several chapters that cover various aspects of optimum design, starting from the fundamentals and progressing to more advanced topics. ### Chapter 1: Introduction to ...
Contains a description of LTE air interface monitoring scenarios as well as other key topics up to an advanced level LTE Signaling, Troubleshooting and Optimization is the Long Term Evolution ...
Illuminating Statistical Analysis Using Scenarios and Simulations By 作者: Jeffrey E. Kottemann ISBN-10 书号: 1119296331 ISBN-13 书号: 9781119296331 Edition 版本: 1 出版日期: 2017-03-06 pages 页数: ...
Work with all aspects of batch processing in a modern Java environment using a selection of Spring frameworks. This book provides up-to-date examples using the latest configuration techniques based on...
Now revised to reflect the innovations of Java 5.0, Goodrich and Tamassia’s Fourth Edition of Data Structures and Algorithms in Java continues to offer accessible coverage of fundamental data ...
Chapter 4, Commands (Where the Wild Things Are), introduces Pub/Sub, transactions, and pipelines. It also introduces the scripting mechanism, which uses the Lua programming language to extend Redis. A...
This award-winning book, substantially updated to reflect the latest developments in the field, introduces the concepts and best practices of software architecture-how a software system is structured ...
Collectively, Netflix teams create hundreds of thousands of tester accounts every day, each being used in thousands of test scenarios, to the point where service providers are more wary of getting ...
Clean Architectures in Python A practical approach to better software design By 作者: Leonardo Giordani Pub Date: 2019 ISBN: n/a Pages: 171 Language: English Format: PDF Size: 10 Mb The clean ...
(a) filling in skeleton tables of the database with examples of what is to be retrieved (b) placing SQL keywords, such as select, under the column names they want to retrieve (c) typing a ...
- **8.3–3 Three Equations in Three Unknowns, Continued**: This example continues the exploration of solving systems of linear equations, focusing on more complex scenarios. It demonstrates the use of...