Usage: curl [options...] <url>
Options: (H) means HTTP/HTTPS only, (F) means FTP only
--anyauth Pick "any" authentication method (H)
-a, --append Append to target file when uploading (F/SFTP)
--basic Use HTTP Basic Authentication (H)
--cacert FILE CA certificate to verify peer against (SSL)
--capath DIR CA directory to verify peer against (SSL)
-E, --cert CERT[:PASSWD] Client certificate file and password (SSL)
--cert-type TYPE Certificate file type (DER/PEM/ENG) (SSL)
--ciphers LIST SSL ciphers to use (SSL)
--compressed Request compressed response (using deflate or gzip)
-K, --config FILE Specify which config file to read
--connect-timeout SECONDS Maximum time allowed for connection
-C, --continue-at OFFSET Resumed transfer offset
-b, --cookie STRING/FILE String or file to read cookies from (H)
-c, --cookie-jar FILE Write cookies to this file after operation (H)
--create-dirs Create necessary local directory hierarchy
--crlf Convert LF to CRLF in upload
--crlfile FILE Get a CRL list in PEM format from the given file
-d, --data DATA HTTP POST data (H)
--data-ascii DATA HTTP POST ASCII data (H)
--data-binary DATA HTTP POST binary data (H)
--data-urlencode DATA HTTP POST data url encoded (H)
--delegation STRING GSS-API delegation permission
--digest Use HTTP Digest Authentication (H)
--disable-eprt Inhibit using EPRT or LPRT (F)
--disable-epsv Inhibit using EPSV (F)
--dns-servers DNS server addrs to use: 1.1.1.1;2.2.2.2
--dns-interface Interface to use for DNS requests
--dns-ipv4-addr IPv4 address to use for DNS requests, dot notation
--dns-ipv6-addr IPv6 address to use for DNS requests, dot notation
-D, --dump-header FILE Write the headers to this file
--egd-file FILE EGD socket path for random data (SSL)
--engine ENGINE Crypto engine (SSL). "--engine list" for list
-f, --fail Fail silently (no output at all) on HTTP errors (H)
-F, --form CONTENT Specify HTTP multipart POST data (H)
--form-string STRING Specify HTTP multipart POST data (H)
--ftp-account DATA Account data string (F)
--ftp-alternative-to-user COMMAND String to replace "USER [name]" (F)
--ftp-create-dirs Create the remote dirs if not present (F)
--ftp-method [MULTICWD/NOCWD/SINGLECWD] Control CWD usage (F)
--ftp-pasv Use PASV/EPSV instead of PORT (F)
-P, --ftp-port ADR Use PORT with given address instead of PASV (F)
--ftp-skip-pasv-ip Skip the IP address for PASV (F)
--ftp-pret Send PRET before PASV (for drftpd) (F)
--ftp-ssl-ccc Send CCC after authenticating (F)
--ftp-ssl-ccc-mode ACTIVE/PASSIVE Set CCC mode (F)
--ftp-ssl-control Require SSL/TLS for ftp login, clear for transfer (F)
-G, --get Send the -d data with a HTTP GET (H)
-g, --globoff Disable URL sequences and ranges using {} and []
-H, --header LINE Custom header to pass to server (H)
-I, --head Show document info only
-h, --help This help text
--hostpubmd5 MD5 Hex encoded MD5 string of the host public key. (SSH)
-0, --http1.0 Use HTTP 1.0 (H)
--http1.1 Use HTTP 1.1 (H)
--http2 Use HTTP 2 (H)
--ignore-content-length Ignore the HTTP Content-Length header
-i, --include Include protocol headers in the output (H/F)
-k, --insecure Allow connections to SSL sites without certs (H)
--interface INTERFACE Specify network interface/address to use
-4, --ipv4 Resolve name to IPv4 address
-6, --ipv6 Resolve name to IPv6 address
-j, --junk-session-cookies Ignore session cookies read from file (H)
--keepalive-time SECONDS Interval between keepalive probes
--key KEY Private key file name (SSL/SSH)
--key-type TYPE Private key file type (DER/PEM/ENG) (SSL)
--krb LEVEL Enable Kerberos with specified security level (F)
--libcurl FILE Dump libcurl equivalent code of this command line
--limit-rate RATE Limit transfer speed to this rate
-l, --list-only List only mode (F/POP3)
--local-port RANGE Force use of these local port numbers
-L, --location Follow redirects (H)
--location-trusted like --location and send auth to other hosts (H)
--login-options OPTIONS Server login options (IMAP, POP3, SMTP)
-M, --manual Display the full manual
--mail-from FROM Mail from this address (SMTP)
--mail-rcpt TO Mail to this/these addresses (SMTP)
--mail-auth AUTH Originator address of the original email (SMTP)
--max-filesize BYTES Maximum file size to download (H/F)
--max-redirs NUM Maximum number of redirects allowed (H)
-m, --max-time SECONDS Maximum time allowed for the transfer
--metalink Process given URLs as metalink XML file
--negotiate Use HTTP Negotiate Authentication (H)
-n, --netrc Must read .netrc for user name and password
--netrc-optional Use either .netrc or URL; overrides -n
--netrc-file FILE Set up the netrc filename to use
-: --next Allows the following URL to use a separate set of options
--no-alpn Disable the ALPN TLS extension (H)
-N, --no-buffer Disable buffering of the output stream
--no-keepalive Disable keepalive use on the connection
--no-npn Disable the NPN TLS extension (H)
--no-sessionid Disable SSL session-ID reusing (SSL)
--noproxy List of hosts which do not use proxy
--ntlm Use HTTP NTLM authentication (H)
--oauth2-bearer TOKEN OAuth 2 Bearer Token (IMAP, POP3, SMTP)
-o, --output FILE Write output to <file> instead of stdout
--pass PASS Pass phrase for the private key (SSL/SSH)
--post301 Do not switch to GET after following a 301 redirect (H)
--post302 Do not switch to GET after following a 302 redirect (H)
--post303 Do not switch to GET after following a 303 redirect (H)
-#, --progress-bar Display transfer progress as a progress bar
--proto PROTOCOLS Enable/disable specified protocols
--proto-redir PROTOCOLS Enable/disable specified protocols on redirect
-x, --proxy [PROTOCOL://]HOST[:PORT] Use proxy on given port
--proxy-anyauth Pick "any" proxy authentication method (H)
--proxy-basic Use Basic authentication on the proxy (H)
--proxy-digest Use Digest authentication on the proxy (H)
--proxy-negotiate Use Negotiate authentication on the proxy (H)
--proxy-ntlm Use NTLM authentication on the proxy (H)
-U, --proxy-user USER[:PASSWORD] Proxy user and password
--proxy1.0 HOST[:PORT] Use HTTP/1.0 proxy on given port
-p, --proxytunnel Operate through a HTTP proxy tunnel (using CONNECT)
--pubkey KEY Public key file name (SSH)
-Q, --quote CMD Send command(s) to server before transfer (F/SFTP)
--random-file FILE File for reading random data from (SSL)
-r, --range RANGE Retrieve only the bytes within a range
--raw Do HTTP "raw", without any transfer decoding (H)
-e, --referer Referer URL (H)
-J, --remote-header-name Use the header-provided filename (H)
-O, --remote-name Write output to a file named as the remote file
--remote-name-all Use the remote file name for all URLs
-R, --remote-time Set the remote file's time on the local output
-X, --request COMMAND Specify request command to use
--resolve HOST:PORT:ADDRESS Force resolve of HOST:PORT to ADDRESS
--retry NUM Retry request NUM times if transient problems occur
--retry-delay SECONDS When retrying, wait this many seconds between each
--retry-max-time SECONDS Retry only within this period
--sasl-ir Enable initial response in SASL authentication
-S, --show-error Show error. With -s, make curl show errors when they occur
-s, --silent Silent mode. Don't output anything
--socks4 HOST[:PORT] SOCKS4 proxy on given host + port
--socks4a HOST[:PORT] SOCKS4a proxy on given host + port
--socks5 HOST[:PORT] SOCKS5 proxy on given host + port
--socks5-hostname HOST[:PORT] SOCKS5 proxy, pass host name to proxy
-Y, --speed-limit RATE Stop transfers below speed-limit for 'speed-time' secs
-y, --speed-time SECONDS Time for trig speed-limit abort. Defaults to 30
--ssl Try SSL/TLS (FTP, IMAP, POP3, SMTP)
--ssl-reqd Require SSL/TLS (FTP, IMAP, POP3, SMTP)
-2, --sslv2 Use SSLv2 (SSL)
-3, --sslv3 Use SSLv3 (SSL)
--ssl-allow-beast Allow security flaw to improve interop (SSL)
--stderr FILE Where to redirect stderr. - means stdout
--tcp-nodelay Use the TCP_NODELAY option
-t, --telnet-option OPT=VAL Set telnet option
--tftp-blksize VALUE Set TFTP BLKSIZE option (must be >512)
-z, --time-cond TIME Transfer based on a time condition
-1, --tlsv1 Use => TLSv1 (SSL)
--tlsv1.0 Use TLSv1.0 (SSL)
--tlsv1.1 Use TLSv1.1 (SSL)
--tlsv1.2 Use TLSv1.2 (SSL)
--trace FILE Write a debug trace to the given file
--trace-ascii FILE Like --trace but without the hex output
--trace-time Add time stamps to trace/verbose output
--tr-encoding Request compressed transfer encoding (H)
-T, --upload-file FILE Transfer FILE to destination
--url URL URL to work with
-B, --use-ascii Use ASCII/text transfer
-u, --user USER[:PASSWORD] Server user and password
--tlsuser USER TLS username
--tlspassword STRING TLS password
--tlsauthtype STRING TLS authentication type (default SRP)
-A, --user-agent STRING User-Agent to send to server (H)
-v, --verbose Make the operation more talkative
-V, --version Show version number and quit
-w, --write-out FORMAT What to output after completion
--xattr Store metadata in extended file attributes
-q If used as the first parameter disables .curlrc
分享到:
相关推荐
【CURL 在 Win 和 Linux 下的详细教程】 CURL 是一个强大的命令行工具,用于传输数据,支持多种协议,如 HTTP、HTTPS、FTP、FTPS 等。无论是 Windows 还是 Linux 操作系统,CURL 都可以方便地进行网络数据的抓取和...
下面是对`curl_setopt()`函数常用参数的详细解释: 1. **CURLOPT_INFILESIZE**: 当上传文件时,此选项设置文件的大小,帮助服务器了解即将接收的数据量。 2. **CURLOPT_VERBOSE**: 设置为非零值,cURL会在执行过程...
curl 命令的基本语法为:`curl [options] URL`,其中 options 是可选参数,URL 是要访问的 URL。 例如,要下载一个 HTML 文件,可以使用以下命令: ``` curl -O ...
Curl.zip 文件包含了一个在Windows环境下使用C++开发的CURL库示例程序。CURL是一个流行的开源库,用于在各种编程语言中处理URL传输,包括文件上传、下载、HTTP、HTTPS、FTP等网络协议。这个C++ DEMO将帮助我们理解...
下载`curl`包的过程非常简单,首先,你需要访问`curl`的官方网站或者通过软件仓库(如APT for Ubuntu或YUM for CentOS)获取最新版本。官网地址是<https://curl.se/download.html>。在网站上,你可以找到适用于不同...
- **查看工作细节**:`-v`参数可展示curl如何与服务器交互,包括发送的所有命令,有助于调试和理解网络请求。 - **断点续传**:通过`-r`参数指定传输范围,实现文件下载的断点续传。 #### 三、表单数据处理 - **...
下面我们将深入探讨一些重要的`curl_setopt`参数。 1. **CURLOPT_INFILESIZE**: 当你需要上传文件到远程服务器时,此选项用于设置上传文件的大小。例如,如果你有一个1MB的文件要上传,你可以设置`curl_setopt($...
**cURL windows 版本详解** cURL 是一个强大的命令行工具,用于传输数据到或从服务器,基于各种协议如HTTP、HTTPS、FTP、FTPS等。它在开发者和系统管理员中广泛使用,用于测试、调试和自动化网络服务。本文将详细...
`curl-7.53.1`是该工具的一个特定版本,由`spendrhy`发布,适用于AIX 7.1操作系统。在AIX系统上安装`curl`对于系统管理员和开发人员来说非常重要,因为它提供了对网络资源的便捷访问,特别是用于调试和测试URL。 ...
类中可能有一个`get()`方法,接受URL作为参数,内部调用curl的GET选项。 - **POST请求**:POST请求用于向服务器发送数据,CUrlHttp类的`post()`方法允许设置数据并发送。它可能使用`CURLOPT_POSTFIELDS`来传递POST...
- 通过URL参数传递选项,方便脚本使用。 2. **git**:Git 是由 Linus Torvalds 开发的版本控制系统,它的主要特性包括: - 分布式:每个开发者的本地都有一份完整的仓库副本,可以离线工作。 - 数据完整性:Git ...
curl-8.4.0.tar.gz curl-8.4.0.zip
这个回调函数会接收一些参数,如接收的数据、总数据量、已接收数据量和用户提供的数据。我们可以通过解析返回的HTTP响应来提取时间信息。 下面是一个简单的示例,展示如何设置回调函数并解析HTTP响应: ```cpp size...
### Centos环境下安装curl #### 一、概述 在Linux环境下安装配置curl是非常常见的操作,尤其是在需要通过PHP脚本来执行HTTP请求的情况下。curl是一个利用URL语法在命令行方式下工作的文件传输工具,它支持多种协议...
**WWW-Curl-4.17.tar - curl, www-curl 和 Perl 知识点详解** `WWW-Curl-4.17.tar` 是一个压缩包文件,它包含了一个名为 `WWW-Curl` 的模块的第 4.17 版本。这个模块是为 Perl 语言设计的,用于与 `curl` 工具集成...
在没有网络连接或者网络环境不稳定的情况下,离线安装`curl`就显得尤为重要。对于CentOS 7系统,我们可以遵循以下步骤进行离线安装`curl`。 首先,你需要确保拥有`curl`的RPM包。在提供的信息中,压缩包文件名为`...
curl的主要特点是跨平台,可以在各种操作系统上运行,并且支持通过命令行参数或编程接口定制传输行为,使得开发者能够灵活地控制数据的发送和接收。 接下来,我们来关注openssl,这是一个强大的安全套接层(SSL)和...
2. `curl_setopt_array()`与`curl_setopt()`: 为CURL会话设置参数。例如,设置超时时间:`curl_setopt($ch, CURLOPT_TIMEOUT, 30)`,或者设置是否将结果写入文件:`curl_setopt($ch, CURLOPT_RETURNTRANSFER, true)`...
1. **URL语法**:curl支持多种协议,如HTTP、HTTPS、FTP、FTPS等,理解和掌握URL的组成部分(如协议、主机、路径、查询参数等)是基础。 2. **命令行选项**:curl提供丰富的命令行选项,如`-L`用于处理重定向,`-d`...