光纤接口缩写及全称(zt)

     今天看到接头光纤的种类，有ST FC SC LC MT—RJ，为了便于记忆想查一下他们的全称是啥？网上好容易查到了，竟然有这么多接口，顺便共享一下。

 

ST       Straight Tip

FC       Ferrul Connector

SC       Subscriber Connector

LC       LUCENT Connector

MT-RJ  Mechanical Transfer Registred Jack

 

记忆方法

• LC接头有时候称为小(Little)接头。
• MT-RJ接头看起来像比较小的8P8C接头。
• ST接头可用"刺入及旋转"(Stab and Twist)来记忆，刺入及旋转就是它的连接方法(将线插入插座，然后旋转外面的卡榫将之锁住)。
• SC接头可用"方形接头"(Square Connector)来记忆，并且有人认为这才是它的正确名称，因为接头本身是方形的。另一记忆方法是(Stick and Click)。
• FC的金属接头对光纤芯提供良好的保护，但它是用旋转的方式，对光纤芯容易造成刮伤。
• SC接头提供良好的包装强度，而且它的先推后拉的连接方式让光纤芯在连接过程中比较有保护。
• LC接头主要应用企业网络环境中，用来取代SC接头的，它的尺寸比较小。它也常见于SFP。
• ST接头有卡榫避免接头损毁，类似BNC接头。
• 对于所有接头，在连接前先清洁有助于保护光纤芯断面不受异物刮伤，延长接头寿命，且避免断面因受污染而影响信号强度。

 

Fiber connector types

Short name Long form Coupling type Ferrule diameter Standard Typical applications

Avio (Avim)		Screw			Aerospace and avionics
ADT-UNI		Screw	2.5 mm		Measurement equipment
Biconic		Screw	2.5 mm		Obsolete
D4		Screw	2.0 mm		Telecom in the 1970s and 1980s, obsolete
Deutsch 1000		Screw			Telecom, obsolete
DIN (LSA)		Screw		IEC 61754-3	Telecom in Germany in 1990s; measurement equipment; obsolete
DMI		Clip	2.5 mm		Printed circuit boards
E-2000 (AKA LSH)		Snap, with light and dust-cap	2.5 mm	IEC 61754-15	Telecom, DWDM systems;
EC		push-pull type		IEC 1754-8	Telecom & CATV networks
ESCON	Enterprise Systems Connection	Snap (duplex)	2.5 mm		IBM mainframe computers and peripherals
F-3000		Snap, with light and dust-cap	1.25 mm	IEC 61754-20	Fiber To The Home (LC Compatible)
FC	Ferrule Connector or Fiber Channel [1]	Screw	2.5 mm	IEC 61754-13	Datacom, telecom, measurement equipment, single mode lasers; becoming less common
Fibergate		Snap, with dust-cap	1.25 mm		Backplane connector
FSMA		Screw	3.175 mm	IEC 60874-2	Datacom, telecom, test and measurement
LC	Lucent Connector [1]or Local Connector[citation needed]	Snap	1.25 mm	IEC 61754-20	High-density connections, SFP transceivers
LuxCis			1.25 mm	ARINC 801	PC or APC configurations (note 3)
LX-5		Snap, with light- and dust-cap		IEC 61754-23	High-density connections; rarely used
MIC	Media Interface Connector	Snap	2.5 mm		Fiber distributed data interface (FDDI)
MPO / MTP	Multiple-Fibre Push-On/Pull-off [1]	Snap (multiplex push-pull coupling)	2.5×6.4 mm [2]	IEC-61754-7; EIA/TIA-604-5 (FOCIS 5)	SM or MM multi-fiber ribbon. Same ferrule as MT, but more easily reconnectable.[2] Used for indoor cabling and device interconnections. MTP is a brand name for an improved connector, which intermates with MPO.[3]
MT	Mechanical Transfer	Snap (multiplex)	2.5×6.4 mm		Pre-terminated cable assemblies; outdoor applications[2]
MT-RJ	Mechanical Transfer Registered Jack or Media Termination - recommended jack [1]	Snap (duplex)	2.45×4.4 mm	IEC 61754-18	Duplex multimode connections
MU	Miniature unit [1]	Snap	1.25 mm	IEC 61754-6	Common in Japan
NEC D4		Screw	2.0 mm		Common in Japan telecom in 1980s
Opti-Jack		Snap (duplex)
OPTIMATE		Screw			Plastic fiber, obsolete
SC	Subscriber Connector [1]or square connector [1]or Standard Connector	Snap (push-pull coupling)	2.5 mm	IEC 61754-4	Datacom and telcom; extremely common
SMA 905	Sub Miniature A	Screw	typ. 3.14 mm		Industrial lasers, military; telecom multimode
SMA 906	Sub Miniature A	Screw	Stepped; typ. 0.118", then .089"[citation needed]		Industrial lasers, military; telecom multimode
SMC	Sub Miniature C	Snap	2.5 mm
ST / BFOC	Straight Tip[1] / Bayonet Fiber Optic Connector	Bayonet	2.5 mm	IEC 61754-2	Multimode, rarely singlemode; APC not possible (note 3)
TOSLINK	Toshiba Link	Snap			Digital audio
VF-45		Snap			Datacom
V-PIN	V-System	Snap (Duplex) Push-pull coupling			Industrial and electric utility networking; multimode 200 μm, 400 μm, 1 mm, 2.2 mm fibers