网站二级域名配置

  公司要求把我们的博客弄成二级域名即：blog.xxxx.com.

如果满足这个需求则要搞三处：公司使用服务器是jboss+apache

虚拟域名用的是ajp。

 

假设你的apche装在C:\Apache2.2里面，则需要修改的文件

有三处：

1.修改文件C:\Apache2.2\conf\httpd.conf

2.修改C:\Apache2.2\conf\extra\httpd-vhosts.conf

3.修改文件D:\jboss-4.2.0.GA\server\default\deploy\jboss-web.deployer\server.xml

4.在应用中放置jboss-web.xml文件。D:\jboss-4.2.0.GA\server\default\deploy\blog.war\WEB-INF\jboss-web.xml

 

<1>修改C:\Apache2.2\conf\httpd.conf文件

 

1）把装载的模块打开

LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so

完整配置文件如下：

 

2）把虚拟域名配置打开

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

写道

#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Apache2.2" will be interpreted by the
# server as "C:/Apache2.2/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/Apache2.2"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 192.168.0.49:80
Listen 127.0.0.1:80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadFile "c:/php-5.2.6/php5ts.dll"
LoadFile "c:/php-5.2.6/libmysql.dll"
PHPIniDir "c:/php-5.2.6"
LoadModule php5_module "c:/php-5.2.6/php5apache2_2.dll"

LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [e-mail]
#
ServerAdmin [e-mail]

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/wwwroot"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "c:/wwwroot">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "logs/access.log" common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://localhost/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "C:/Apache2.2/cgi-bin/"

</IfModule>

<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock
</IfModule>

#
# "C:/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/Apache2.2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-httpd-php .php
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

 

<2>修改C:\Apache2.2\conf\extra\httpd-vhosts.conf

添加

<VirtualHost *:80>
  ServerName blog.xxxx.com
  ProxyPass / ajp://localhost:8009/
  ProxyPassReverse / ajp://localhost:8009/
</VirtualHost>

完整配置文件

写道

#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
#<VirtualHost *:80>
# ServerAdmin [e-mail]
# DocumentRoot "/usr/local/apache2/docs/dummy-host.example.com"
# ServerName dummy-host.example.com
# ServerAlias www.dummy-host.example.com
# ErrorLog "logs/dummy-host.example.com-error_log"
# CustomLog "logs/dummy-host.example.com-access_log" common
#</VirtualHost>

#<VirtualHost *:80>
# ServerAdmin [e-mail]
# DocumentRoot "/usr/local/apache2/docs/dummy-host2.example.com"
# ServerName dummy-host2.example.com
# ErrorLog "logs/dummy-host2.example.com-error_log"
# CustomLog "logs/dummy-host2.example.com-access_log" common
#</VirtualHost>

#<VirtualHost 127.0.0.1:80>
# ServerAdmin [e-mail]
# ServerName *
# UseCanonicalName Off
# VirtualDocumentRoot /var/www/virtual/usersite/%-4+/
# Alias /css "/var/www/virtual/template/css"
# Alias /js "/var/www/virtual/template/js"
# Alias /images "/var/www/virtual/template/images"
# <Directory "/var/www/virtual/template/">
# Options None
# AllowOverride None
# Order allow,deny
# Allow from all
# </Directory>
#</VirtualHost>

<VirtualHost *:80>
ServerName www.hotct.com
ServerAlias hotct.com dt.hotct.com
DocumentRoot /var/www/www.hotct.com
Alias /bbs "/var/www/bbs.hotct.com"
<Directory "/var/www/bbs.hotct.com">
AllowOverride FileInfo Options
</Directory>

Alias /css "/usr/local/jboss/server/default/deploy/hotct.war/css"

<Directory "/usr/local/jboss/server/default/deploy/hotct.war/css">
Options None
AllowOverride None
Order allow,deny
Allow from all
# Order deny,allow
# Deny from all
# Allow from 127.0.0.1
</Directory>

Alias /images "/usr/local/jboss/server/default/deploy/hotct.war/images"

<Directory "/usr/local/jboss/server/default/deploy/hotct.war/images">
Options None
AllowOverride None
Order allow,deny
Allow from all
# Order deny,allow
# Deny from all
# Allow from 127.0.0.1
</Directory>

Alias /js "/usr/local/jboss/server/default/deploy/hotct.war/js"

<Directory "/usr/local/jboss/server/default/deploy/hotct.war/js">
Options None
AllowOverride None
Order allow,deny
Allow from all
# Order deny,allow
# Deny from all
# Allow from 127.0.0.1
</Directory>

ProxyPass /css !
ProxyPass /images !
ProxyPass /js !

ProxyPass /bbs !
ProxyPass /common !
ProxyPass /help !

ProxyPass / ajp://localhost:8009/
ProxyPassReverse / ajp://localhost:8009/

# CustomLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-access_log.%Y%m%d" "combined"
# ErrorLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-error_log.%Y%m%d"

#CustomLog logs/www.hotct.com_log "combined"
</VirtualHost>



<VirtualHost *:80>
ServerAdmin [e-mail]
DocumentRoot /var/www/images.hotct.com
ServerName images.hotct.com
# CustomLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-access_log.%Y%m%d" "combined"
# ErrorLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-error_log.%Y%m%d"
</VirtualHost>

#<VirtualHost *:80>
# DocumentRoot /var/www/expert.hotct.com
# ServerName expert.hotct.com
# <Directory "/var/www/expert.hotct.com">
# AllowOverride FileInfo Options
# </Directory>

# Alias /blog "/var/www/blog.hotct.com"
# <Directory "/var/www/blog.hotct.com">
# AllowOverride FileInfo Options
# </Directory>

# ProxyPass /olqa ajp://localhost:8009/olqa
# ProxyPassReverse /olqa ajp://localhost:8009/olaq

# ProxyPass /FamilyDoctor ajp://localhost:8009/FamilyDoctor
# ProxyPassReverse /FamilyDoctor ajp://localhost:8009/FamilyDoctor

# ProxyPass /dr ajp://localhost:8009/dr
# ProxyPassReverse /dr ajp://localhost:8009/dr
# CustomLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-access_log.%Y%m%d" "combined"
# ErrorLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-error_log.%Y%m%d"

#</VirtualHost>

<VirtualHost *:80>
ServerName www.fst-cn.com
# Alias /css "/usr/local/jboss/server/default/deploy/about.war/css"
# Alias /images "/usr/local/jboss/server/default/deploy/about.war/images"
# Alias /js "/usr/local/jboss/server/default/deploy/about.war/js"
# ProxyPass /css !
# ProxyPass /images !
# ProxyPass /js !
ProxyPass / ajp://localhost:8009/
ProxyPassReverse / ajp://localhost:8009/
</VirtualHost>

<VirtualHost *:80>
ServerName expert.hotct.com
ProxyPass / ajp://localhost:8009/
ProxyPassReverse / ajp://localhost:8009/
</VirtualHost>

<VirtualHost *:80>
ServerName biz.hotct.com
ProxyPass / ajp://localhost:8009/
ProxyPassReverse / ajp://localhost:8009/
</VirtualHost>

<VirtualHost *:80>
ServerName hd.hotct.com
ProxyPass / ajp://localhost:8009/
ProxyPassReverse / ajp://localhost:8009/
</VirtualHost>

<VirtualHost *:80>
ServerName blog.hotct.com
ProxyPass / ajp://localhost:8009/
ProxyPassReverse / ajp://localhost:8009/
</VirtualHost>

<VirtualHost *:80>

ServerAdmin [e-mail]
ServerName cas.hotct.com

ProxyPass /cas ajp://localhost:8009/cas
ProxyPassReverse /cas ajp://localhost:8009/cas
# CustomLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-access_log.%Y%m%d" "combined"
# ErrorLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-error_log.%Y%m%d"
</VirtualHost>



<VirtualHost *:80>
ServerAdmin [e-mail]
ServerName search.hotct.com

ProxyPass /search ajp://localhost:8009/search
ProxyPassReverse /search ajp://localhost:8009/search
# CustomLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-access_log.%Y%m%d" "combined"
# ErrorLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-error_log.%Y%m%d"

</VirtualHost>







####################################################################

#<VirtualHost *:81>
#
# ServerName cacti.hotct.com
# DocumentRoot /usr/local/cacti
# <Directory "/usr/local/cacti">
# Options None
# AllowOverride None
# order allow,deny
# Allow from all
# </Directory>
#
#</VirtualHost>

#<VirtualHost *:80>
# ServerName awstats.hotct.com
# DocumentRoot /usr/local/awstats/wwwroot
# Alias /awstatsclasses "/usr/local/awstats/wwwroot/classes/"
# Alias /awstatscss "/usr/local/awstats/wwwroot/css/"
# Alias /awstatsicons "/usr/local/awstats/wwwroot/icon/"
# ScriptAlias /awstats/ "/usr/local/awstats/wwwroot/cgi-bin/"
# <Directory "/usr/local/awstats/wwwroot">
# AuthType Basic
# AuthName "Restricted Files"
# AuthUserFile /usr/local/apache2/passwords
# Require user awsuser
# Options None
# AllowOverride None
# Order allow,deny
# Allow from all
# </Directory>

#</VirtualHost>

#added by genstone at 2009-3-11,blog test
<VirtualHost *:80>
ServerName dmgy.blog.hotct.com
ServerAdmin [e-mail]
DocumentRoot /var/www/dmgy.blog.hotct.com
</VirtualHost>

#<VirtualHost *:80>
# ServerAdmin [e-mail]
# ServerName awstats.hotct.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog "/home/ebnew/apachelog/access_log" combined
# DocumentRoot /var/www/awstats/wwwroot
# Alias /awstatsclasses "/var/www/awstats/wwwroot/classes/"
# Alias /awstatscss "/var/www/awstats/wwwroot/css/"
# Alias /awstatsicons "/var/www/awstats/wwwroot/icon/"
# ScriptAlias /awstats/ "/var/www/awstats/wwwroot/cgi-bin/"
# <Directory "/var/www/awstats/wwwroot">
# AuthType Basic
# AuthName "Restricted Files"
# AuthUserFile /usr/local/apache2/passwords
# Require user awsuser
# Options None
# AllowOverride None
# Order allow,deny
# Allow from all
# </Directory>
#</VirtualHost>

 

<3>修改文件D:\jboss-4.2.0.GA\server\default\deploy\jboss-web.deployer\server.xml

添加

    <Host name="blog.hotct.com" unpackWARs="true" autoDeploy="false" deployOnStartup="false" deployXML="false">
        <Alias>blog.hotct.com</Alias>
        <Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
                        prefix="blog" suffix=".log" pattern="common"
                        directory="${jboss.server.home.dir}/log" resolveHosts="false" />
        <DefaultContext cookies="true" crossContext="true" override="true"/>
        <Context path="/" docBase="D:/jboss-4.2.0.GA/server/default/deploy/blog.war/"
                        cookies="true" debug="1" reloadable="true" />
     </Host>

 

完整配置文件

写道

<Server>

<!--APR library loader. Documentation at /docs/apr.html -->
<Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />
<!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html -->
<Listener className="org.apache.catalina.core.JasperListener" />

<!-- Use a custom version of StandardService that allows the
connectors to be started independent of the normal lifecycle
start to allow web apps to be deployed before starting the
connectors.
-->
<Service name="jboss.web">

<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Documentation at :
Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
Java AJP Connector: /docs/config/ajp.html
APR (HTTP/AJP) Connector: /docs/apr.html
Define a non-SSL HTTP/1.1 Connector on port 8080
-->
<!-- Connector port="8080" address="192.168.0.49"
maxThreads="250" maxHttpHeaderSize="8192"
emptySessionPath="true" protocol="HTTP/1.1"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" /> -->
<Connector port="8080" address="192.168.0.49"
maxThreads="250" maxHttpHeaderSize="8192"
emptySessionPath="true" protocol="HTTP/1.1"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true"
URIEncoding="UTF-8"
/>
<!-- Define a SSL HTTP/1.1 Connector on port 8443
This connector uses the JSSE configuration, when using APR, the
connector should be using the OpenSSL style configuration
described in the APR documentation -->
<!--
<Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true"
maxThreads="150" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->

<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3"
emptySessionPath="true" enableLookups="false" redirectPort="8443" />

<Engine name="jboss.web" defaultHost="localhost">

<!-- The JAAS based authentication and authorization realm implementation
that is compatible with the jboss 3.2.x realm implementation.
- certificatePrincipal : the class name of the
org.jboss.security.auth.certs.CertificatePrincipal impl
used for mapping X509[] cert chains to a Princpal.
- allRolesMode : how to handle an auth-constraint with a role-name=*,
one of strict, authOnly, strictAuthOnly
+ strict = Use the strict servlet spec interpretation which requires
that the user have one of the web-app/security-role/role-name
+ authOnly = Allow any authenticated user
+ strictAuthOnly = Allow any authenticated user only if there are no
web-app/security-roles
-->
<Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm"
certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping"
allRolesMode="authOnly"
/>
<!-- A subclass of JBossSecurityMgrRealm that uses the authentication
behavior of JBossSecurityMgrRealm, but overrides the authorization
checks to use JACC permissions with the current java.security.Policy
to determine authorized access.
- allRolesMode : how to handle an auth-constraint with a role-name=*,
one of strict, authOnly, strictAuthOnly
+ strict = Use the strict servlet spec interpretation which requires
that the user have one of the web-app/security-role/role-name
+ authOnly = Allow any authenticated user
+ strictAuthOnly = Allow any authenticated user only if there are no
web-app/security-roles
<Realm className="org.jboss.web.tomcat.security.JaccAuthorizationRealm"
certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping"
allRolesMode="authOnly"
/>
-->

<Host name="localhost"
autoDeploy="false" deployOnStartup="false" deployXML="false"
configClass="org.jboss.web.tomcat.security.config.JBossContextConfig"
>

<!-- Uncomment to enable request dumper. This Valve "logs interesting
contents from the specified Request (before processing) and the
corresponding Response (after processing). It is especially useful
in debugging problems related to headers and cookies."
-->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve" />
-->

<!-- Access logger -->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
prefix="localhost_access_log." suffix=".log"
pattern="common" directory="${jboss.server.home.dir}/log"
resolveHosts="false" />
-->

<!-- Uncomment to enable single sign-on across web apps
deployed to this host. Does not provide SSO across a cluster.

If this valve is used, do not use the JBoss ClusteredSingleSignOn
valve shown below.

A new configuration attribute is available beginning with
release 4.0.4:

cookieDomain configures the domain to which the SSO cookie
will be scoped (i.e. the set of hosts to
which the cookie will be presented). By default
the cookie is scoped to "/", meaning the host
that presented it. Set cookieDomain to a
wider domain (e.g. "xyz.com") to allow an SSO
to span more than one hostname.
-->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->

<!-- Uncomment to enable single sign-on across web apps
deployed to this host AND to all other hosts in the cluster.

If this valve is used, do not use the standard Tomcat SingleSignOn
valve shown above.

Valve uses a JBossCache instance to support SSO credential
caching and replication across the cluster. The JBossCache
instance must be configured separately. By default, the valve
shares a JBossCache with the service that supports HttpSession
replication. See the "jboss-web-cluster-service.xml" file in the
server/all/deploy directory for cache configuration details.

Besides the attributes supported by the standard Tomcat
SingleSignOn valve (see the Tomcat docs), this version also
supports the following attributes:

cookieDomain see above

treeCacheName JMX ObjectName of the JBossCache MBean used to
support credential caching and replication across
the cluster. If not set, the default value is
"jboss.cache:service=TomcatClusteringCache", the
standard ObjectName of the JBossCache MBean used
to support session replication.
-->
<!--
<Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" />
-->

<!-- Check for unclosed connections and transaction terminated checks
in servlets/jsps.

Important: The dependency on the CachedConnectionManager
in META-INF/jboss-service.xml must be uncommented, too
-->
<Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve"
cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager"
transactionManagerObjectName="jboss:service=TransactionManager" />

</Host>



<Host name="blog.hotct.com" unpackWARs="true" autoDeploy="false" deployOnStartup="false" deployXML="false">
<Alias>blog.hotct.com</Alias>
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
prefix="blog" suffix=".log" pattern="common"
directory="${jboss.server.home.dir}/log" resolveHosts="false" />
<DefaultContext cookies="true" crossContext="true" override="true"/>
<Context path="/" docBase="D:/jboss-4.2.0.GA/server/default/deploy/blog.war/"
cookies="true" debug="1" reloadable="true" />
</Host>






</Engine>

</Service>

</Server>

 

<4>在应用中添加配置文件D:\jboss-4.2.0.GA\server\default\deploy\blog.war\WEB-INF\jboss-web.xml

写道

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE jboss-web PUBLIC "-//JBoss//DTD Web Application 2.3//EN"
"http://www.jboss.org/j2ee/dtd/jboss-web_3_0.dtd">
<jboss-web>
<context-root>/</context-root>
<virtual-host>blog.hotct.com</virtual-host>
</jboss-web>