Chariot的默认端口

Chariot是测试网络的利器，由其工作原理可知endpoint需要监听特定端口来接受console的控制命令。这些端口是什么呀？查了半天文档没搞清楚，跑一把netstat -a终于抓出来这个magic port是10115，再搜文档，找到了以下表格。留此存档，

IxChariot Flow

Port Number Used

Console to Endpoint 1 test setup using TCP	10115
Console to Endpoint 1 test setup using SPX	10117
Endpoint 1 to Console test results	Port numbers specified in Firewall Options

iptables

• -A RH-Firewall-1-INPUT -s 192.168.1.0/24 -p udp -m udp --dport 10115 -j ACCEPT
• -A RH-Firewall-1-INPUT -s 192.168.1.0/24 -p tcp -m tcp --dport 10115 -j ACCEPT

评论

1 楼 caocao 2007-06-12  

You have accepted the terms and conditions of the license agreement.

Any running copies of endpoint are being stopped now.


Notice!  To have the endpoint start when your system reboots,
you must update your system rc scripts.

If your Linux system uses 'rc.local', add the following line
to the 'rc.local' file:
    /usr/local/Ixia/endpoint 1>>/var/local/endpoint.console 2>&1 &

Do not forget the ampersand (&) at the end of the line; without it,
the boot process will not continue and you may be unable to log in
at the console.

The endpoint install directory now uses /usr/local/Ixia instead of
/usr/local/NetIQ.  If your rc.local referenced /usr/local/NetIQ,
you should change it to use the new directory.

If your Linux system supports System V-style rc scripts,
copy /usr/local/Ixia/rc2exec.lnx to the appropriate places.
For example, with Red Hat Linux 5.0, you might run these commands:

   cp /usr/local/Ixia/rc2exec.lnx /etc/rc.d/init.d/endpoint
   ln -fs /etc/rc.d/init.d/endpoint /etc/rc.d/rc2.d/S81endpoint
   ln -fs /etc/rc.d/init.d/endpoint /etc/rc.d/rc3.d/S81endpoint
   ln -fs /etc/rc.d/init.d/endpoint /etc/rc.d/rc6.d/K81endpoint

For Red Hat Linux 5.2 or later, the recommended commands are:
   cp /usr/local/Ixia/rc2exec.lnx /etc/rc.d/init.d/endpoint
   /sbin/chkconfig endpoint reset


Starting the IxChariot Performance Endpoint.

Installation of endpoint was successful.