(转载)Oracle分页查询语句

 

原文：Oracle分页查询语句 1

 

 

Oracle的分页查询语句基本上可以按照本文给出的格式来进行套用。

 

 

分页查询格式：

SELECT * FROM
(
SELECT A.*, ROWNUM RN
FROM (SELECT * FROM TABLE_NAME) A
WHERE ROWNUM <= 40
)
WHERE RN >= 21

其中最内层的查询SELECT * FROM TABLE_NAME表示不进行翻页的原始查询语句。ROWNUM <= 40和RN >= 21控制分页查询的每页的范围。

上面给出的这个分页查询语句，在大多数情况拥有较高的效率。分页的目的就是控制输出结果集大小，将结果尽快的返回。在上面的分页查询语句中，这种考虑主要体现在WHERE ROWNUM <= 40这句上。

选择第21到40条记录存在两种方法，一种是上面例子中展示的在查询的第二层通过ROWNUM <= 40来控制最大值，在查询的最外层控制最小值。而另一种方式是去掉查询第二层的WHERE ROWNUM <= 40语句，在查询的最外层控制分页的最小值和最大值。这是，查询语句如下：

SELECT * FROM
(
SELECT A.*, ROWNUM RN
FROM (SELECT * FROM TABLE_NAME) A
)
WHERE RN BETWEEN 21 AND 40

对比这两种写法，绝大多数的情况下，第一个查询的效率比第二个高得多。

这是由于CBO优化模式下，Oracle可以将外层的查询条件推到内层查询中，以提高内层查询的执行效率。对于第一个查询语句，第二层的查询条件WHERE ROWNUM <= 40就可以被Oracle推入到内层查询中，这样Oracle查询的结果一旦超过了ROWNUM限制条件，就终止查询将结果返回了。

而第二个查询语句，由于查询条件BETWEEN 21 AND 40是存在于查询的第三层，而Oracle无法将第三层的查询条件推到最内层（即使推到最内层也没有意义，因为最内层查询不知道RN代表什么）。因此，对于第二个查询语句，Oracle最内层返回给中间层的是所有满足条件的数据，而中间层返回给最外层的也是所有数据。数据的过滤在最外层完成，显然这个效率要比第一个查询低得多。

上面分析的查询不仅仅是针对单表的简单查询，对于最内层查询是复杂的多表联合查询或最内层查询包含排序的情况一样有效。

这里就不对包含排序的查询进行说明了，下一篇文章会通过例子来详细说明。下面简单讨论一下多表联合的情况。对于最常见的等值表连接查询，CBO一般可能会采用两种连接方式NESTED LOOP和HASH JOIN（MERGE JOIN效率比HASH JOIN效率低，一般CBO不会考虑）。在这里，由于使用了分页，因此指定了一个返回的最大记录数，NESTED LOOP在返回记录数超过最大值时可以马上停止并将结果返回给中间层，而HASH JOIN必须处理完所有结果集（MERGE JOIN也是）。那么在大部分的情况下，对于分页查询选择NESTED LOOP作为查询的连接方法具有较高的效率（分页查询的时候绝大部分的情况是查询前几页的数据，越靠后面的页数访问几率越小）。

因此，如果不介意在系统中使用HINT的话，可以将分页的查询语句改写为：

SELECT /*+ FIRST_ROWS */ * FROM
(
SELECT A.*, ROWNUM RN
FROM (SELECT * FROM TABLE_NAME) A
WHERE ROWNUM <= 40
)
WHERE RN >= 21

 

 

 

原文：Oracle分页查询语句（二）

 

Oracle的分页查询语句基本上可以按照本文给出的格式来进行套用。

Oracle分页查询语句（一）：http://yangtingkun.itpub.net/post/468/100278

 

 

 

这篇文章用几个例子来说明分页查询的效率。首先构造一个比较大的表作为测试表：

SQL> CREATE TABLE T AS SELECT * FROM DBA_OBJECTS, DBA_SEQUENCES;

表已创建。

SQL> SELECT COUNT(*) FROM T;

COUNT(*)
----------
457992

首先比较两种分页方法的区别：

SQL> SET AUTOT ON
SQL> COL OBJECT_NAME FORMAT A30
SQL> EXEC DBMS_STATS.GATHER_TABLE_STATS(USER, 'T')

PL/SQL 过程已成功完成。

SQL> SELECT OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME FROM T
8 )
9 )
10 WHERE RN BETWEEN 11 AND 20;

OBJECT_ID OBJECT_NAME
---------- ------------------------------
5807 ALL_APPLY_PROGRESS
1769 ALL_ARGUMENTS
2085 ALL_ASSOCIATIONS
4997 ALL_AUDIT_POLICIES
4005 ALL_BASE_TABLE_MVIEWS
5753 ALL_CAPTURE
5757 ALL_CAPTURE_PARAMETERS
5761 ALL_CAPTURE_PREPARED_DATABASE
5765 ALL_CAPTURE_PREPARED_SCHEMAS
5769 ALL_CAPTURE_PREPARED_TABLES

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=864 Card=457992 Bytes=42135264)
1 0 VIEW (Cost=864 Card=457992 Bytes=42135264)
2 1 COUNT
3 2 TABLE ACCESS (FULL) OF 'T' (Cost=864 Card=457992 Bytes=9617832)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
8979 consistent gets
7422 physical reads
0 redo size
758 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
10 rows processed

SQL> SELECT OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME FROM T
8 )
9 WHERE ROWNUM <= 20
10 )
11 WHERE RN >= 11;

OBJECT_ID OBJECT_NAME
---------- ------------------------------
5807 ALL_APPLY_PROGRESS
1769 ALL_ARGUMENTS
2085 ALL_ASSOCIATIONS
4997 ALL_AUDIT_POLICIES
4005 ALL_BASE_TABLE_MVIEWS
5753 ALL_CAPTURE
5757 ALL_CAPTURE_PARAMETERS
5761 ALL_CAPTURE_PREPARED_DATABASE
5765 ALL_CAPTURE_PREPARED_SCHEMAS
5769 ALL_CAPTURE_PREPARED_TABLES

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=864 Card=20 Bytes=1840)
1 0 VIEW (Cost=864 Card=20 Bytes=1840)
2 1 COUNT (STOPKEY)
3 2 TABLE ACCESS (FULL) OF 'T' (Cost=864 Card=457992 Bytes=9617832)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
5 consistent gets
0 physical reads
0 redo size
758 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
10 rows processed

二者执行效率相差很大，一个需要8000多逻辑读，而另一个只需要5个逻辑读。观察二者的执行计划可以发现，两个执行计划唯一的区别就是第二个查询在COUNT这步使用了STOPKEY，也就是说，Oracle将ROWNUM <= 20推入到查询内层，当符合查询的条件的记录达到STOPKEY的值，则Oracle结束查询。

因此，可以预见，采用第二种方式，在翻页的开始部分查询速度很快，越到后面，效率越低，当翻到最后一页，效率应该和第一种方式接近。

SQL> SELECT OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME FROM T
8 )
9 WHERE ROWNUM <= 457990
10 )
11 WHERE RN >= 457980;

OBJECT_ID OBJECT_NAME
---------- ------------------------------
7128 XCF_I_HANDLE_STATUS
7126 XCF_P
7127 XCF_U1
7142 XDF
7145 XDF_I_DF_KEY
7146 XDF_I_HANDLE_STATUS
7143 XDF_P
7144 XDF_U1
TEST.YANGTINGKUN
TEST4.YANGTINGKUN
YANGTK.YANGTINGKUN

已选择11行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=864 Card=457990 Bytes=42135080)
1 0 VIEW (Cost=864 Card=457990 Bytes=42135080)
2 1 COUNT (STOPKEY)
3 2 TABLE ACCESS (FULL) OF 'T' (Cost=864 Card=457992 Bytes=9617832)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
8979 consistent gets
7423 physical reads
0 redo size
680 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
11 rows processed

 

 

Oracle的分页查询语句基本上可以按照本文给出的格式来进行套用。

Oracle分页查询语句（一）：http://yangtingkun.itpub.net/post/468/100278

Oracle分页查询语句（二）：http://yangtingkun.itpub.net/post/468/101703

 

 

 

继续看查询的第二种情况，包含表连接的情况：

SQL> CREATE TABLE T AS SELECT * FROM DBA_USERS;

表已创建。

SQL> CREATE TABLE T1 AS SELECT * FROM DBA_SOURCE;

表已创建。

SQL> ALTER TABLE T ADD CONSTRAINT PK_T PRIMARY KEY (USERNAME);

表已更改。

SQL> ALTER TABLE T1 ADD CONSTRAINT FK_T1_OWNER FOREIGN KEY (OWNER)
2 REFERENCES T(USERNAME);

表已更改。

SQL> CREATE INDEX IND_T1_OWNER ON T1(NAME);

索引已创建。

SQL> EXEC DBMS_STATS.GATHER_TABLE_STATS(USER, 'T')

PL/SQL 过程已成功完成。

SQL> EXEC DBMS_STATS.GATHER_TABLE_STATS(USER, 'T1')

PL/SQL 过程已成功完成。

创建了T表和T1表，默认情况下，HASH JOIN的效率要比NESTED LOOP高很多：

SQL> SET AUTOT TRACE
SQL> SELECT * FROM T, T1 WHERE T.USERNAME = T1.OWNER;

已选择96985行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=844 Card=96985 Bytes=46164860)
1 0 HASH JOIN (Cost=844 Card=96985 Bytes=46164860)
2 1 TABLE ACCESS (FULL) OF 'T' (Cost=2 Card=12 Bytes=1044)
3 1 TABLE ACCESS (FULL) OF 'T1' (Cost=826 Card=96985 Bytes=37727165)

Statistics
----------------------------------------------------------
39 recursive calls
0 db block gets
14475 consistent gets
7279 physical reads
0 redo size
37565579 bytes sent via SQL*Net to client
71618 bytes received via SQL*Net from client
6467 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
96985 rows processed

SQL> SELECT /*+ FIRST_ROWS */ * FROM T, T1 WHERE T.USERNAME = T1.OWNER;

已选择96985行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=HINT: FIRST_ROWS (Cost=97811 Card=96985 Bytes=46164860)
1 0 NESTED LOOPS (Cost=97811 Card=96985 Bytes=46164860)
2 1 TABLE ACCESS (FULL) OF 'T1' (Cost=826 Card=96985 Bytes=37727165)
3 1 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=1 Card=1 Bytes=87)
4 3 INDEX (UNIQUE SCAN) OF 'PK_T' (UNIQUE)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
117917 consistent gets
7268 physical reads
0 redo size
37565579 bytes sent via SQL*Net to client
71618 bytes received via SQL*Net from client
6467 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
96985 rows processed

但是如果分页查询的内层是这种连接查询的话，使用NESTED LOOP可以更快的得到前N条记录。

下面看一下这种情况下的分页查询情况：

SQL> SELECT USER_ID, USERNAME, NAME
2 FROM
3 (
4 SELECT ROWNUM RN, USER_ID, USERNAME, NAME
5 FROM
6 (
7 SELECT T.USER_ID, T.USERNAME, T1.NAME
8 FROM T, T1
9 WHERE T.USERNAME = T1.OWNER
10 )
11 WHERE ROWNUM <= 20
12 )
13 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=830 Card=20 Bytes=1200)
1 0 VIEW (Cost=830 Card=20 Bytes=1200)
2 1 COUNT (STOPKEY)
3 2 HASH JOIN (Cost=830 Card=96985 Bytes=2909550)
4 3 TABLE ACCESS (FULL) OF 'T' (Cost=2 Card=12 Bytes=132)
5 3 TABLE ACCESS (FULL) OF 'T1' (Cost=826 Card=96985 Bytes=1842715)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
8 consistent gets
7 physical reads
0 redo size
574 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
10 rows processed

SQL> SELECT /*+ FIRST_ROWS */ USER_ID, USERNAME, NAME
2 FROM
3 (
4 SELECT ROWNUM RN, USER_ID, USERNAME, NAME
5 FROM
6 (
7 SELECT T.USER_ID, T.USERNAME, T1.NAME
8 FROM T, T1
9 WHERE T.USERNAME = T1.OWNER
10 )
11 WHERE ROWNUM <= 20
12 )
13 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=HINT: FIRST_ROWS (Cost=97811 Card=20 Bytes=1200)
1 0 VIEW (Cost=97811 Card=20 Bytes=1200)
2 1 COUNT (STOPKEY)
3 2 NESTED LOOPS (Cost=97811 Card=96985 Bytes=2909550)
4 3 TABLE ACCESS (FULL) OF 'T1' (Cost=826 Card=96985 Bytes=1842715)
5 3 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=1 Card=1 Bytes=11)
6 5 INDEX (UNIQUE SCAN) OF 'PK_T' (UNIQUE)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
28 consistent gets
0 physical reads
0 redo size
574 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
10 rows processed

看上去似乎HASH JOIN效率更高，难道上面说错了。

其实这个现象是由于这个例子的特殊性造成的。T表是根据DBA_USERS创建，这张表很小。HASH JOIN中第一步也就是第一张表的全表扫描是无法应用STOPKEY的，这就是上面提到的NESTED LOOP比HASH JOIN优势的地方。但是，这个例子中，恰好第一张表很小，对这张表的全扫描的代价极低，因此，显得HASH JOIN效率更高。但是，这不具备共性，如果两张表的大小相近，或者Oracle错误的选择了先扫描大表，则使用HASH JOIN的效率就会低得多。

SQL> SELECT USER_ID, USERNAME, NAME
2 FROM
3 (
4 SELECT ROWNUM RN, USER_ID, USERNAME, NAME
5 FROM
6 (
7 SELECT /*+ ORDERED */ T.USER_ID, T.USERNAME, T1.NAME
8 FROM T1, T
9 WHERE T.USERNAME = T1.OWNER
10 )
11 WHERE ROWNUM <= 20
12 )
13 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=951 Card=20 Bytes=1200)
1 0 VIEW (Cost=951 Card=20 Bytes=1200)
2 1 COUNT (STOPKEY)
3 2 HASH JOIN (Cost=951 Card=96985 Bytes=2909550)
4 3 TABLE ACCESS (FULL) OF 'T1' (Cost=826 Card=96985 Bytes=1842715)
5 3 TABLE ACCESS (FULL) OF 'T' (Cost=2 Card=12 Bytes=132)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
8585 consistent gets
7310 physical reads
0 redo size
601 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
10 rows processed

通过HINT提示，让Oracle先扫描大表，这回结果就很明显了。NESTED LOOP的效果要比HASH JOIN好得多。

下面，继续比较一下两个分页操作的写法，为了使结果更具有代表性，这里都采用了FIRST_ROWS提示，让Oracle采用NESTED LOOP的方式来进行表连接：

SQL> SELECT /*+ FIRST_ROWS */ USER_ID, USERNAME, NAME
2 FROM
3 (
4 SELECT ROWNUM RN, USER_ID, USERNAME, NAME
5 FROM
6 (
7 SELECT T.USER_ID, T.USERNAME, T1.NAME
8 FROM T, T1
9 WHERE T.USERNAME = T1.OWNER
10 )
11 WHERE ROWNUM <= 20
12 )
13 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=HINT: FIRST_ROWS (Cost=97811 Card=20 Bytes=1200)
1 0 VIEW (Cost=97811 Card=20 Bytes=1200)
2 1 COUNT (STOPKEY)
3 2 NESTED LOOPS (Cost=97811 Card=96985 Bytes=2909550)
4 3 TABLE ACCESS (FULL) OF 'T1' (Cost=826 Card=96985 Bytes=1842715)
5 3 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=1 Card=1 Bytes=11)
6 5 INDEX (UNIQUE SCAN) OF 'PK_T' (UNIQUE)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
28 consistent gets
0 physical reads
0 redo size
574 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
10 rows processed

SQL> SELECT /*+ FIRST_ROWS */ USER_ID, USERNAME, NAME
2 FROM
3 (
4 SELECT ROWNUM RN, USER_ID, USERNAME, NAME
5 FROM
6 (
7 SELECT T.USER_ID, T.USERNAME, T1.NAME
8 FROM T, T1
9 WHERE T.USERNAME = T1.OWNER
10 )
11 )
12 WHERE RN BETWEEN 11 AND 20;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=HINT: FIRST_ROWS (Cost=97811 Card=96985 Bytes=5819100)
1 0 VIEW (Cost=97811 Card=96985 Bytes=5819100)
2 1 COUNT
3 2 NESTED LOOPS (Cost=97811 Card=96985 Bytes=2909550)
4 3 TABLE ACCESS (FULL) OF 'T1' (Cost=826 Card=96985 Bytes=1842715)
5 3 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=1 Card=1 Bytes=11)
6 5 INDEX (UNIQUE SCAN) OF 'PK_T' (UNIQUE)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
105571 consistent gets
7299 physical reads
0 redo size
574 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
10 rows processed

两种写法的效率差别极大。关键仍然是是否能将STOPKEY应用到最内层查询中。

对于表连接来说，在写分页查询的时候，可以考虑增加FIRST_ROWS提示，它有助于更快的将查询结果返回。

其实，不光是表连接，对于所有的分页查询都可以加上FIRST_ROWS提示。不过需要注意的时，分页查询的目标是尽快的返回前N条记录，因此，无论是ROWNUM还是FIRST_ROWS机制都是提高前几页的查询速度，对于分页查询的最后几页，采用这些机制不但无法提高查询速度，反而会明显降低查询效率，对于这一点使用者应该做到心中有数。

原文：Oracle分页查询语句（四）

Oracle的分页查询语句基本上可以按照本文给出的格式来进行套用。

Oracle分页查询语句（一）：http://yangtingkun.itpub.net/post/468/100278

Oracle分页查询语句（二）：http://yangtingkun.itpub.net/post/468/101703

Oracle分页查询语句（三）：http://yangtingkun.itpub.net/post/468/104595

 

 

 

最后的例子说明内部循环包含排序的情况：

SQL> CREATE TABLE T AS SELECT * FROM DBA_OBJECTS;

表已创建。

SQL> CREATE INDEX IND_T_OBJECT_NAME ON T (OBJECT_NAME);

索引已创建。

SQL> ALTER TABLE T MODIFY OBJECT_NAME NOT NULL;

表已更改。

SQL> EXEC DBMS_STATS.GATHER_TABLE_STATS(USER, 'T')

PL/SQL 过程已成功完成。

下面进行测试包含排序操作的分页查询。可以简单的将查询分为两种不同情况，第一种排序列就是索引列，这种可以利用索引读取，第二种排序列没有索引。

第一种情况又可以细分为：完全索引扫描和通过索引扫描定位到表记录两种情况。

无论是那种情况，都可以通过索引的全扫描来避免排序的产生。看下面的例子：

SQL> SET AUTOT TRACE
SQL> SELECT OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_NAME FROM T ORDER BY OBJECT_NAME
8 )
9 WHERE ROWNUM <= 20
10 )
11 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=26 Card=20 Bytes=1580)
1 0 VIEW (Cost=26 Card=20 Bytes=1580)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=26 Card=6361 Bytes=419826)
4 3 INDEX (FULL SCAN) OF 'IND_T_OBJECT_NAME' (NON-UNIQUE) (Cost=26 Card=6361 Bytes=108137)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
3 consistent gets
0 physical reads
0 redo size
576 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
10 rows processed

这种情况下，通过索引可以完全得到查询的结果，因此可以避免表扫描的产生，而且，由于索引已经是排序过的，因此通过索引的全扫描，连排序操作都省略了。

SQL> SELECT OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME FROM T ORDER BY OBJECT_NAME
8 )
9 WHERE ROWNUM <= 20
10 )
11 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=43 Card=20 Bytes=1840)
1 0 VIEW (Cost=43 Card=20 Bytes=1840)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=43 Card=6361 Bytes=502519)
4 3 SORT (ORDER BY STOPKEY) (Cost=43 Card=6361 Bytes=133581)
5 4 TABLE ACCESS (FULL) OF 'T' (Cost=9 Card=6361 Bytes=133581)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
81 consistent gets
0 physical reads
0 redo size
673 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
10 rows processed

由于不能仅仅通过索引扫描得到查询结果，这里Oracle选择了表扫描。这是由于初始化参数设置决定的。因此，建议在分页的时候使用FIRST_ROWS提示。

SQL> SELECT /*+ FIRST_ROWS */ OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME FROM T ORDER BY OBJECT_NAME
8 )
9 WHERE ROWNUM <= 20
10 )
11 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=HINT: FIRST_ROWS (Cost=826 Card=20 Bytes=1840)
1 0 VIEW (Cost=826 Card=20 Bytes=1840)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=826 Card=6361 Bytes=502519)
4 3 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=826 Card=6361 Bytes=133581)
5 4 INDEX (FULL SCAN) OF 'IND_T_OBJECT_NAME' (NON-UNIQUE) (Cost=26 Card=6361)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
22 consistent gets
0 physical reads
0 redo size
673 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
10 rows processed

使用了FIRST_ROWS提示后，Oracle不需要扫描全表，而且避免了排序操作。

下面讨论最后一种情况，排序列不是索引列。这个时候排序不可避免，但是利用给出分页格式，Oracle不会对所有数据进行排序，而是只排序前N条记录。

SQL> SELECT OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME FROM T ORDER BY TIMESTAMP
8 )
9 )
10 WHERE RN BETWEEN 11 AND 20;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=64 Card=6361 Bytes=585212)
1 0 VIEW (Cost=64 Card=6361 Bytes=585212)
2 1 COUNT
3 2 VIEW (Cost=64 Card=6361 Bytes=502519)
4 3 SORT (ORDER BY) (Cost=64 Card=6361 Bytes=260801)
5 4 TABLE ACCESS (FULL) OF 'T' (Cost=9 Card=6361 Bytes=260801)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
81 consistent gets
0 physical reads
0 redo size
690 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
10 rows processed

SQL> SELECT OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME FROM T ORDER BY TIMESTAMP
8 )
9 WHERE ROWNUM <= 20
10 )
11 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=64 Card=20 Bytes=1840)
1 0 VIEW (Cost=64 Card=20 Bytes=1840)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=64 Card=6361 Bytes=502519)
4 3 SORT (ORDER BY STOPKEY) (Cost=64 Card=6361 Bytes=260801)
5 4 TABLE ACCESS (FULL) OF 'T' (Cost=9 Card=6361 Bytes=260801)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
81 consistent gets
0 physical reads
0 redo size
690 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
10 rows processed

观察两种不同写法的ORDER BY步骤，一个是带STOPKEY的ORDER BY，另一个不带。在大数据量需要排序的情况下，带STOPKEY的效率要比不带STOPKEY排序的效率高得多。

SQL> INSERT INTO T SELECT T.* FROM T, USER_OBJECTS;

已创建407104行。

SQL> COMMIT;

提交完成。

SQL> SELECT OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME FROM
5 (
6 SELECT OBJECT_ID, OBJECT_NAME FROM T ORDER BY TIMESTAMP
7 )
8 WHERE ROWNUM <= 20
9 )
10 WHERE RN >= 11;

已选择10行。

已用时间: 00: 00: 03.78

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=64 Card=20 Bytes=1840)
1 0 VIEW (Cost=64 Card=20 Bytes=1840)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=64 Card=6361 Bytes=502519)
4 3 SORT (ORDER BY STOPKEY) (Cost=64 Card=6361 Bytes=260801)
5 4 TABLE ACCESS (FULL) OF 'T' (Cost=9 Card=6361 Bytes=260801)

Statistics
----------------------------------------------------------
268 recursive calls
0 db block gets
6215 consistent gets
6013 physical reads
0 redo size
740 bytes sent via SQL*Net to client
385 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
6 sorts (memory)
0 sorts (disk)
10 rows processed

SQL> SELECT OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME FROM
5 (
6 SELECT OBJECT_ID, OBJECT_NAME FROM T ORDER BY TIMESTAMP
7 )
8 )
9 WHERE RN BETWEEN 11 AND 20;

已选择10行。

已用时间: 00: 00: 11.86

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=64 Card=6361 Bytes=585212)
1 0 VIEW (Cost=64 Card=6361 Bytes=585212)
2 1 COUNT
3 2 VIEW (Cost=64 Card=6361 Bytes=502519)
4 3 SORT (ORDER BY) (Cost=64 Card=6361 Bytes=260801)
5 4 TABLE ACCESS (FULL) OF 'T' (Cost=9 Card=6361 Bytes=260801)

Statistics
----------------------------------------------------------
26 recursive calls
12 db block gets
6175 consistent gets
9219 physical reads
0 redo size
737 bytes sent via SQL*Net to client
385 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
1 sorts (disk)
10 rows processed

观察两个查询语句的执行时间，以及统计信息中的排序信息。对于第一个查询语句，Oracle利用了ORDER BY STOPKEY方式进行排序，排序操作只排序需要的TOP N的数据，因此排序操作放到了内存中，而对于第二个查询语句来说，进行的数据的全排序，排序数据量大，排序操作不得不在磁盘上完成，因此耗时比较多。

通过上面的例子可以看出给出的标准分页查询格式，对于包含排序的操作仍然可以在很大程度上提高分页查询性能。

 

 

原文：Oracle分页查询语句（五）

 

Oracle的分页查询语句基本上可以按照本文给出的格式来进行套用。

Oracle分页查询语句（一）：http://yangtingkun.itpub.net/post/468/100278

Oracle分页查询语句（二）：http://yangtingkun.itpub.net/post/468/101703

Oracle分页查询语句（三）：http://yangtingkun.itpub.net/post/468/104595

Oracle分页查询语句（四）：http://yangtingkun.itpub.net/post/468/104867

 

 

 

前面的各种例子已经说明了分页查询语句的标准写法所带来的性能提升。

这里简单总结一下，并简单的说明分页查询语句在何时无法带来性能提升。

分页查询语句之所以可以很快的返回结果，是因为它的目标是最快的返回第一条结果。如果每页有20条记录，目前翻到第5页，那么只需要返回前100条记录都可以满足查询的要求了，也许还有几万条记录也符合查询的条件，但是由于分页的限制，在当前的查询中可以忽略这些数据，而只需尽快的返回前100条数据。这也是为什么在标准分页查询语句中经常会使用FIRST_ROWS提示的原因。

对于行操作，可以在得到结果的同时将结果直接返回给上一层调用。但是对于结果集操作，Oracle必须得到结果集中所有的数据，因此分页查询中所带的ROWNUM信息不起左右。如果最内层的子查询中包含了下面这些操作中的一个以上，则分页查询语句无法体现出任何的性能优势：UNION、UNION ALL、MINUS、INTERSECT、GROUP BY、DISTINCT、UNIQUE以及聚集函数如MAX、MIN和分析函数等。

除了这些操作以外，分页查询还有一个很明显的特点，就是处理的页数越小，效率就越高，越到后面，查询速度越慢。

分页查询用来提高返回速度的方法都是针对数据量较小的前N条记录而言。无论是索引扫描，NESTED LOOP连接，还是ORDER BY STOPKEY，这些方法带来性能提升的前提都是数据量比较小，一旦分页到了最后几页，会发现这些方法不但没有办法带来性能的提升，而且性能比普通查询还要低得多。这一点，在使用分页查询的时候，一定要心里有数。

最后看几个例子：

首先看看UNION ALL、GROUP BY以及分析函数使外层的ROWNUM限制对内层查询无效。

SQL> SET AUTOT TRACE
SQL> SELECT /*+ FIRST_ROWS */ OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME FROM T ORDER BY OBJECT_NAME
8 )
9 WHERE ROWNUM <= 20
10 )
11 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=HINT: FIRST_ROWS (Cost=826 Card=20 Bytes=1840)
1 0 VIEW (Cost=826 Card=20 Bytes=1840)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=826 Card=6361 Bytes=502519)
4 3 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=826 Card=6361 Bytes=133581)
5 4 INDEX (FULL SCAN) OF 'IND_T_OBJECT_NAME' (NON-UNIQUE) (Cost=26 Card=6361)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
23 consistent gets
0 physical reads
0 redo size
597 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
10 rows processed

这是分页查询ROWNUM起作用的情况，下面看看如果内层查询包括了集操作时的情况：

SQL> SELECT /*+ FIRST_ROWS */ OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME FROM T
8 UNION ALL
9 SELECT OBJECT_ID, OBJECT_NAME FROM T
10 ORDER BY OBJECT_NAME
11 )
12 WHERE ROWNUM <= 20
13 )
14 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=HINT: FIRST_ROWS (Cost=85 Card=20 Bytes=1840)
1 0 VIEW (Cost=85 Card=20 Bytes=1840)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=85 Card=12722 Bytes=1005038)
4 3 SORT (ORDER BY STOPKEY) (Cost=18 Card=12722 Bytes=267162)
5 4 UNION-ALL
6 5 TABLE ACCESS (FULL) OF 'T' (Cost=9 Card=6361 Bytes=133581)
7 5 TABLE ACCESS (FULL) OF 'T' (Cost=9 Card=6361 Bytes=133581)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
322 consistent gets
0 physical reads
0 redo size
546 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
10 rows processed

SQL> SELECT /*+ FIRST_ROWS */ OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT /*+ INDEX(T) */ OBJECT_ID, OBJECT_NAME FROM T
8 UNION ALL
9 SELECT /*+ INDEX(T) */ OBJECT_ID, OBJECT_NAME FROM T
10 ORDER BY OBJECT_NAME
11 )
12 WHERE ROWNUM <= 20
13 )
14 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=HINT: FIRST_ROWS (Cost=1719 Card=20 Bytes=1840)
1 0 VIEW (Cost=1719 Card=20 Bytes=1840)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=1719 Card=12722 Bytes=1005038)
4 3 SORT (ORDER BY STOPKEY) (Cost=1652 Card=12722 Bytes=267162)
5 4 UNION-ALL
6 5 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=826 Card=6361 Bytes=133581)
7 6 INDEX (FULL SCAN) OF 'IND_T_OBJECT_NAME' (NON-UNIQUE) (Cost=26 Card=6361)
8 5 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=826 Card=6361 Bytes=133581)
9 8 INDEX (FULL SCAN) OF 'IND_T_OBJECT_NAME' (NON-UNIQUE) (Cost=26 Card=6361)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
24004 consistent gets
0 physical reads
0 redo size
546 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
10 rows processed

如果说全表扫描的情况下，ROWNUM不起作用效果也不是很明显的话，通过使用HINT，让Oracle使用索引扫描，这时ROWNUM不起作用的效果就相当惊人了。

SQL> SELECT /*+ FIRST_ROWS */ OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME FROM T
8 GROUP BY OBJECT_ID, OBJECT_NAME
9 ORDER BY OBJECT_NAME
10 )
11 WHERE ROWNUM <= 20
12 )
13 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=HINT: FIRST_ROWS (Cost=43 Card=20 Bytes=1840)
1 0 VIEW (Cost=43 Card=20 Bytes=1840)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=43 Card=6361 Bytes=502519)
4 3 SORT (GROUP BY STOPKEY) (Cost=43 Card=6361 Bytes=133581)
5 4 TABLE ACCESS (FULL) OF 'T' (Cost=9 Card=6361 Bytes=133581)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
161 consistent gets
0 physical reads
0 redo size
673 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
10 rows processed

SQL> SELECT /*+ FIRST_ROWS */ OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME, ROW_NUMBER() OVER(ORDER BY OBJECT_NAME)
8 FROM T
9 ORDER BY OBJECT_NAME
10 )
11 WHERE ROWNUM <= 20
12 )
13 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=HINT: FIRST_ROWS (Cost=826 Card=20 Bytes=1840)
1 0 VIEW (Cost=826 Card=20 Bytes=1840)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=826 Card=6361 Bytes=502519)
4 3 WINDOW (BUFFER) (Cost=826 Card=6361 Bytes=133581)
5 4 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=826 Card=6361 Bytes=133581)
6 5 INDEX (FULL SCAN) OF 'IND_T_OBJECT_NAME' (NON-UNIQUE) (Cost=26 Card=6361)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
12002 consistent gets
0 physical reads
0 redo size
597 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
10 rows processed

上面的例子说明了分页查询的优化作用对于哪些种查询不起作用，下面看看，分页查询在翻页到最后的时候的性能。

SQL> SET AUTOT OFF
SQL> SELECT COUNT(*) FROM T;

COUNT(*)
----------
12722

SQL> SET AUTOT TRACE
SQL> SELECT /*+ FIRST_ROWS */ OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME
8 FROM T
9 ORDER BY OBJECT_NAME
10 )
11 WHERE ROWNUM <= 20
12 )
13 WHERE RN >= 11;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=HINT: FIRST_ROWS (Cost=826 Card=20 Bytes=1840)
1 0 VIEW (Cost=826 Card=20 Bytes=1840)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=826 Card=6361 Bytes=502519)
4 3 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=826 Card=6361 Bytes=133581)
5 4 INDEX (FULL SCAN) OF 'IND_T_OBJECT_NAME' (NON-UNIQUE) (Cost=26 Card=6361)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
23 consistent gets
0 physical reads
0 redo size
597 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
10 rows processed

SQL> SELECT OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME
8 FROM T
9 ORDER BY OBJECT_NAME
10 )
11 )
12 WHERE RN BETWEEN 11 AND 20;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=43 Card=6361 Bytes=585212)
1 0 VIEW (Cost=43 Card=6361 Bytes=585212)
2 1 COUNT
3 2 VIEW (Cost=43 Card=6361 Bytes=502519)
4 3 SORT (ORDER BY) (Cost=43 Card=6361 Bytes=133581)
5 4 TABLE ACCESS (FULL) OF 'T' (Cost=9 Card=6361 Bytes=133581)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
161 consistent gets
0 physical reads
0 redo size
597 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
10 rows processed

首先看一下，分页查询的性能比不使用ROWNUM的情况要强很多，但是，如果将分页的范围设置到12710和12720之间，这时候再来对比一下两种查询的效率。

SQL> SELECT /*+ FIRST_ROWS */ OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME
8 FROM T
9 ORDER BY OBJECT_NAME
10 )
11 WHERE ROWNUM <= 12720
12 )
13 WHERE RN >= 12711;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=HINT: FIRST_ROWS (Cost=826 Card=6361 Bytes=585212)
1 0 VIEW (Cost=826 Card=6361 Bytes=585212)
2 1 COUNT (STOPKEY)
3 2 VIEW (Cost=826 Card=6361 Bytes=502519)
4 3 TABLE ACCESS (BY INDEX ROWID) OF 'T' (Cost=826 Card=6361 Bytes=133581)
5 4 INDEX (FULL SCAN) OF 'IND_T_OBJECT_NAME' (NON-UNIQUE) (Cost=26 Card=6361)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
12001 consistent gets
0 physical reads
0 redo size
612 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
10 rows processed

SQL> SELECT OBJECT_ID, OBJECT_NAME
2 FROM
3 (
4 SELECT ROWNUM RN, OBJECT_ID, OBJECT_NAME
5 FROM
6 (
7 SELECT OBJECT_ID, OBJECT_NAME
8 FROM T
9 ORDER BY OBJECT_NAME
10 )
11 )
12 WHERE RN BETWEEN 12711 AND 12720;

已选择10行。

Execution Plan
----------------------------------------------------------
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=43 Card=6361 Bytes=585212)
1 0 VIEW (Cost=43 Card=6361 Bytes=585212)
2 1 COUNT
3 2 VIEW (Cost=43 Card=6361 Bytes=502519)
4 3 SORT (ORDER BY) (Cost=43 Card=6361 Bytes=133581)
5 4 TABLE ACCESS (FULL) OF 'T' (Cost=9 Card=6361 Bytes=133581)

Statistics
----------------------------------------------------------
0 recursive calls
0 db block gets
161 consistent gets
0 physical reads
0 redo size
612 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
1 sorts (memory)
0 sorts (disk)
10 rows processed

不难发现，对于第二个查询，效率和第一次执行完全一样，但是分页查询的效率则大大的下降，而且此时的效率远远低于没有使用ROWNUM的查询。

原文：Oracle分页查询语句（六）

Oracle的分页查询语句基本上可以按照本文给出的格式来进行套用。

Oracle分页查询语句（一）：http://yangtingkun.itpub.net/post/468/100278

Oracle分页查询语句（二）：http://yangtingkun.itpub.net/post/468/101703

Oracle分页查询语句（三）：http://yangtingkun.itpub.net/post/468/104595

Oracle分页查询语句（四）：http://yangtingkun.itpub.net/post/468/104867

Oracle分页查询语句（五）：http://yangtingkun.itpub.net/post/468/107934

 

 

 

这篇文章通过例子说明分页查询使用的NESTED LOOP操作，在分页查询翻到最后几页时的性能问题：

SQL> CREATE TABLE T AS SELECT * FROM DBA_USERS;

表已创建。

SQL> CREATE TABLE T1 AS SELECT * FROM DBA_SOURCE;

表已创建。

SQL> ALTER TABLE T ADD CONSTRAINT PK_T PRIMARY KEY (USERNAME);

表已更改。

SQL> ALTER TABLE T1 ADD CONSTRAINT FK_T1_OWNER FOREIGN KEY (OWNER)
2 REFERENCES T(USERNAME);

表已更改。

SQL> CREATE INDEX IND_T1_OWNER ON T1(NAME);

索引已创建。

SQL> EXEC DBMS_STATS.GATHER_TABLE_STATS(USER, 'T')

PL/SQL 过程已成功完成。

<sp