t400 安装fedora

1. 分区
a./boot [200MB] sda2

b.swap [8GB] sda5 //一般说法是内存的2倍

c.LVM [300GB] sda4

a)/home [8G] VolGroup00-LogVol00

b)/opt [16G] VolGroup00-LogVol01

c)/ [276G] VolGroup00-LogVol02
2.取消Selinux
$ su
# vim /etc/selinux/config

  //把其中的一行："SELINUX=enforcing" --改成--> "SELINUX=disabled"
3.安装ATI驱动
  # sh  ati-driver-installer-9-9-x86.x86_64.run
4.JDK
  # chmod  a+x  jdk-6u16-linux-i586-rpm.bin
  # ./jdk-6u16-linux-i586-rpm.bin
5.触摸板
  建立 /etc/hal/fdi/policy/shmconfig.fdi

<?xml version="1.0" encoding="ISO-8859-1"?>

<deviceinfo version="0.2">

<device>

<match key="input.x11_driver" string="synaptics">

<merge key="input.x11_options.SHMConfig" type="string">true</merge>

</match>

</device>

</deviceinfo>

安装gsynaptics包

yum install gsynaptics

  重新启动(不是注销)，在系统－>首选项－>硬件－>触摸板 里设置


6.指点杆
  vim  etc/X11/xorg.conf
  加入
 

 Section "ServerFlags"  
        Option  "AutoAddDevices"        "false"  
        EndSection  
         Section "InputDevice"  
       Identifier  "Configured Mouse"  
       Driver      "mouse"  
       Option      "CorePointer"  
       Option      "Device"              "/dev/input/mice"  
       Option      "Protocol"            "ExplorerPS/2"  
       Option      "Emulate3Buttons"     "on"  
       Option      "Emulate3TimeOut"     "50"  
       Option      "EmulateWheel"        "on"  
       Option      "EmulateWheelTimeOut" "200"  
       Option      "EmulateWheelButton"  "2"  
       Option      "YAxisMapping"        "4 5"  
       Option      "XAxisMapping"        "6 7"  
       Option      "ZAxisMapping"        "4 5"  
 EndSection  
 Section "InputDevice"  
      Identifier "Synaptics Touchpad"  
      Driver     "synaptics"  
      Option     "SendCoreEvents"    "true"  
      Option     "Device"        "/dev/psaux"  
      Option     "Protocol"      "auto-dev"  
      Option     "HorizScrollDelta"  "0"  
      Option     "SHMConfig"         "on"  
 EndSection  

  在  Section "ServerLayout"添加

InputDevice    "Configured Mouse"  
InputDevice "Synaptics Touchpad"