Redis 3.2文档-1.比较3.0

一、Redis3.0与3.2文件对比

1. clone redis

git clone https://github.com/antirez/redis.git

2. checkout分支

cd redis
git checkout 3.0
git checkout 3.2

 

3. 比较

(1) 比较3.0和3.2文件变化数

> git rev-list 3.0..3.2 --count
1708

 

(2) 比较3.0和3.2文件变化统计

> git diff 3.0..3.2 --shortstat
比较3.0和3.2文件变化数

二、Redis3.0与3.2默认配置文件变化

1.配置变化

Redis3.2添加了两个配置：

• protected-mode yes
• supervised no

Redis3.2修改了个配置：
有关list的优化，由配置一改为配置二，虽然还没详细了解，应该是list的底层数据结构做了一些新的变化或者优化。

配置一：

list-max-ziplist-entries 512
list-max-ziplist-value 64

 
配置二： 

list-max-ziplist-size -2
list-compress-depth 0

 
配置三： 

bind 127.0.0.1

 
bind在Redis3.2.0中默认改为127.0.0.1 

2.新配置说明

• (1).protected-mode(默认是yes)

# Protected mode is a layer of security protection, in order to avoid that
# Redis instances left open on the internet are accessed and exploited.
#
# When protected mode is on and if:
#
# 1) The server is not binding explicitly to a set of addresses using the
#    "bind" directive.
# 2) No password is configured.
#
# The server only accepts connections from clients connecting from the
# IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain
# sockets.
#
# By default protected mode is enabled. You should disable it only if
# you are sure you want clients from other hosts to connect to Redis
# even if no authentication is configured, nor a specific set of interfaces
# are explicitly listed using the "bind" directive.

 

说明

• 用一段代码就可以说明什么是protected-mode

  if (protected-mode && !requirepass && !bind) {
  	Allow only 127.0.0.1,::1 or socket connections
      Deny (with the long message ever!) others 
  }

   

• 其实设置成默认是为了保护对redis不了解的人，提供安全性，但是对于对于不需要bind和requirepass的使用者（例如内网），需要将protected-mode设置为no

• (2).supervised(默认是no)

# If you run Redis from upstart or systemd, Redis can interact with your
# supervision tree. Options:
#   supervised no      - no supervision interaction
#   supervised upstart - signal upstart by putting Redis into SIGSTOP mode
#   supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET
#   supervised auto    - detect upstart or systemd method based on
#                        UPSTART_JOB or NOTIFY_SOCKET environment variables
# Note: these supervision methods only signal "process is ready."
#       They do not enable continuous liveness pings back to your supervisor.

 

说明
可以通过upstart和systemd管理Redis守护进程，这个参数是和具体的操作系统相关的。

• (3).bind (Redis3.2.0中bind默认是127.0.0.1)

# By default, if no "bind" configuration directive is specified, Redis listens
# for connections from all the network interfaces available on the server.
# It is possible to listen to just one or multiple selected interfaces using
# the "bind" configuration directive, followed by one or more IP addresses.
#
# Examples:
#
# bind 192.168.1.100 10.0.0.1
# bind 127.0.0.1 ::1
#
# ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the
# internet, binding to all the interfaces is dangerous and will expose the
# instance to everybody on the internet. So by default we uncomment the
# following bind directive, that will force Redis to listen only into
# the IPv4 lookback interface address (this means Redis will be able to
# accept connections only from clients running into the same computer it
# is running).
#
# IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
# JUST COMMENT THE FOLLOWING LINE.
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
bind 127.0.0.1

 

说明
bind在Redis3.2.0之前默认是0.0.0.0或者说””，为了保证不太了解Redis安全性的人，在Redis3.2.0中bind默认是127.0.0.1,也就是只有本机回环地址可以访问。如果需要配置sentinel、cluster或者需要机器机器可以访问该Redis实例请修改为0.0.0.0或者指定的内网IP.

• (4).list-max-ziplist-size(默认-2)

  # Lists are also encoded in a special way to save a lot of space.
  # The number of entries allowed per internal list node can be specified
  # as a fixed maximum size or a maximum number of elements.
  # For a fixed maximum size, use -5 through -1, meaning:
  # -5: max size: 64 Kb  <-- not recommended for normal workloads
  # -4: max size: 32 Kb  <-- not recommended
  # -3: max size: 16 Kb  <-- probably not recommended
  # -2: max size: 8 Kb   <-- good
  # -1: max size: 4 Kb   <-- good
  # Positive numbers mean store up to _exactly_ that number of elements
  # per list node.
  # The highest performing option is usually -2 (8 Kb size) or -1 (4 Kb size),
  # but if your use case is unique, adjust the settings as necessary.

   

• (5).list-compress-depth(默认是0)

  # Lists may also be compressed.
  # Compress depth is the number of quicklist ziplist nodes from *each* side of
  # the list to *exclude* from compression.  The head and tail of the list
  # are always uncompressed for fast push/pop operations.  Settings are:
  # 0: disable all list compression
  # 1: depth 1 means "don't start compressing until after 1 node into the list,
  #    going from either the head or tail"
  #    So: [head]->node->node->...->node->[tail]
  #    [head], [tail] will always be uncompressed; inner nodes will compress.
  # 2: [head]->[next]->node->node->...->node->[prev]->[tail]
  #    2 here means: don't compress head or head->next or tail->prev or tail,
  #    but compress all nodes between them.
  # 3: [head]->[next]->[next]->node->node->...->node->[prev]->[prev]->[tail]
  # etc.

   

说明
Redis3.2.0引入了新的quicklist的数据结构做了list的底层存储方案。废弃了原来的两个配置参数，list-max-ziplist-entries和list-max-ziplist-value

127.0.0.1:6388> config get list-max-ziplist-size
1) "list-max-ziplist-size"
2) "-2"
127.0.0.1:6388> config get list-compress-depth
1) "list-compress-depth"
2) "0"
127.0.0.1:6388> lpush user_list u1 u2 u5 u7 u99 u10 u3
(integer) 7
127.0.0.1:6388> object encoding user_list
"quicklist"

 

在Redis3.2.0中设置原来的参数已经不生效了，应该是无法使用了。

127.0.0.1:6388> config set list-max-ziplist-entries 512
(error) ERR Unsupported CONFIG parameter: list-max-ziplist-entries
127.0.0.1:6388> config set list-max-ziplist-value 64
(error) ERR Unsupported CONFIG parameter: list-max-ziplist-value

  

有关quicklist的详细使用还需要查询文档和源码来研究

三、 Redis3.0与3.2关于Cluster的一些变化(来自3.2-release-notes)

原文：

写道

Redis Cluster changes:

All the Redis Cluster changes in 3.2 were backported to 3.0, so there is
technically nothing new for now in this release. The most important things
are:

* Cluster rebalancing.
* A pipelined MIGRATE command which is 10x faster and makes resharding
and rebalancing faster.
* Improved replicas migration.
* As a side effect of quicklists encoding (see above items), moving big
lists between nodes is now a lot faster.

 
Redis3.2.0的cluster完全兼容Redis3.0,也就是说可以混合部署组成集群，在Redis Cluster上Redis3.2.0没有做什么新的技术，但是也有一些比较重要的事情： 

• Redis Cluster均衡（应该是指redis-trib.rb中实现类将slot进行负载均衡的功能）
• 提供了一个基于流水线的migrate命令，用于水平迁移数据，速度是原来的10倍多。
• 提升了从几点迁移的功能。
• 在quicklist这种新的数据结构的帮助下，在节点之间迁移大的big list快了很多.

注意：上述特性均在Redis3.0.7有体现，如果对于Redis3.2.0不太放心的话，可以使用Redis3.0.7。

四、 Redis3.0与3.2关于Sentinel的一些变化(来自3.2-release-notes)

原文：

 

Redis Sentinel changes:

* [NEW] Sentinel connection sharing. Makes Sentinels able to scale to
monitor many masters. (Salvatore Sanfilippo)
* [NEW] New SENTINEL INFO-CACHE command. (Matt Stancliff)
* More things backported to Redis 3.0 in the past, so no longer news of 3.2.

 Sentinel connection sharing不太了解，看着像是添加新的sentinel节点后，可以共享其他sentinel节点的master，对于sentinel监控多个master比较有用，这样扩展sentinel节点时候比较方便配置，有关这个后面会继续试验。 

• 提供info-cache命令