本文使用的开发板是九鼎创展的X210 iNand版本。
一、查阅原理图中SDRAM相关部分
从以上原理图中可以得出以下信息：
（1）开发板上使用的SDRAM编码是K4T1G164QQ
（2）开发板上包括4片内存芯片，每片内存的数据总线都是16位的
（3）横向的两颗内存芯片是并联的（并联时地址总线的接法一样，但数据总线要加起来），这样连接相当于在逻辑上可以把这两颗内存芯片看成是一个32位的内存芯片
（4）每个内存端口都由3类总线构成：地址总线（Xm1_ADDR0～Xm1_ADDR13、Xm2_ADDR0～Xm2_ADDR13）+ 控制总线 + 数据总线（Xm1_DATA0～Xm1_DATA31、Xm2_DATA0～Xm2_DATA31）
二、查阅SDRAM数据手册
由上图可得出K4T1G164QQ的含义如下：
K：三星内存
4：DRAM
T：DDR2 SDRAM
1G：1Gb（128MB）
16：单芯片16位宽
4：8 Banks
由上图可得出以下信息：
（1）S5PV210的内存端口信号中有BA0～BA2，接在内存芯片的BA0～BA2上，这些引脚用来选择Bank
（2）每个Bank内部有128Mb，通过Row Address（14位）+ Column Address（10位）的方式来综合寻址
（3）一共能寻址的范围是：2的24次方，也就是16MB（128Mb）的内存
三、查阅数据手册中内存映射相关部分
从上图可得出以下信息：
（1）S5PV210共有两个内存端口，分别是DRAM0和DRAM1
（2）DRAM0的内存地址范围是0x20000000～0x3FFFFFFF（512MB）
（3）DRAM1的内存地址范围是0x40000000～0x7FFFFFFF（1024MB）
由此，得出结论：
（1）S5PV210最多支持1.5GB的内存，如果给它更多的内存，CPU就无法识别
（2）S5PV210最多支持1.5GB的内存，但实际开发板上不一定有这么多。例如X210开发板就只有512MB的内存（DRAM0端口分布256MB，DRAM1端口分布256MB）
（3）X210开发板上内存的合法地址是0x20000000～0x2FFFFFFF（256MB）+ 0x40000000～0x4FFFFFFF（256MB）
综合以上信息，进一步得出结论：
（1）X210开发板共使用了4片内存，每片1Gb（128MB），共512MB
（2）DRAM0对应的引脚是Xm1_xxxx
（3）DRAM1对应的引脚是Xm2_xxxx
（4）从数据总线的位数可知，X210开发板用的是32位的内存
四、查阅数据手册中DDR2初始化相关部分
由上图可知：初始化DDR2共需27个步骤。
综合前文所述，初始化DRAM时分为2部分：第一部分初始化DRAM0，第二部分初始化DRAM1。
编码实现部分只实现DRAM0的初始化，DRAM1的初始化步骤相同。
五、代码实现
1、led.c
#define GPJ0CON 0xE0200240
#define GPJ0DAT 0xE0200244
#define rGPJ0CON *((volatile unsigned int *)GPJ0CON)
#define rGPJ0DAT *((volatile unsigned int *)GPJ0DAT)
void delay(void);
void led_blink(void) {
rGPJ0CON = 0x11111111;
while(1) {
// led亮
rGPJ0DAT = ((0<<3) | (0<<4) | (0<<5));
// 延时
delay();
// led灭
rGPJ0DAT = ((1<<3) | (1<<4) | (1<<5));
// 延时
delay();
}
}
void delay(void) {
volatile unsigned int i = 900000;
while (i--);
}
2、link.lds
SECTIONS
{
. = 0x20000000;
.text : {
start.o
sdram_init.o
* (.text)
}
.data : {
* (.data)
}
bss_start = .;
.bss : {
* (.bss)
}
bss_end = .;
}
3、Makefie
led.bin: start.o led.o sdram_init.o arm-linux-ld -Tlink.lds -o led.elf $^ arm-linux-objcopy -O binary led.elf led.bin arm-linux-objdump -D led.elf > led_elf.dis gcc mkv210_image.c -o mkx210 ./mkx210 led.bin 210.bin %.o : %.S arm-linux-gcc -o $@ $< -c -nostdlib %.o : %.c arm-linux-gcc -o $@ $< -c -nostdlib clean: rm *.o *.elf *.bin *.dis mkx210 -f
4、start.S
#define SVC_STACK 0xD0037D80 .global _start _start: ldr sp, =SVC_STACK // 初始化DDR bl sdram_asm_init // 重定位 adr r0, _start ldr r1, =_start ldr r2, =bss_start cmp r0, r1 beq clean_bss copy_loop: ldr r3, [r0], #4 str r3, [r1], #4 cmp r1, r2 bne copy_loop clean_bss: ldr r0, =bss_start ldr r1, =bss_end cmp r0, r1 beq run_on_dram mov r2, #0 clear_loop: str r2, [r0], #4 cmp r0, r1 bne clear_loop run_on_dram: ldr pc, =led_blink b .
5、sdram_init.S
#include "s5pv210.h" #if 1 #define DMC0_MEMCONTROL 0x00202400 // MemControl BL=4, 1Chip, DDR2 Type, dynamic self refresh, force precharge, dynamic power down off #define DMC0_MEMCONFIG_0 0x20F01323 // MemConfig0 256MB config, 8 banks,Mapping Method[12:15]0:linear, 1:linterleaved, 2:Mixed #define DMC0_MEMCONFIG_1 0x30F00312 // MemConfig1 默认值 #define DMC0_TIMINGA_REF 0x00000618 // TimingAref 7.8us*133MHz=1038(0x40E), 100MHz=780(0x30C), 20MHz=156(0x9C), 10MHz=78(0x4E) #define DMC0_TIMING_ROW 0x28233287 // TimingRow for @200MHz #define DMC0_TIMING_DATA 0x23240304 // TimingData CL=3 #define DMC0_TIMING_PWR 0x09C80232 // TimingPower #define DMC1_MEMCONTROL 0x00202400 // MemControl BL=4, 2 chip, DDR2 type, dynamic self refresh, force precharge, dynamic power down off #define DMC1_MEMCONFIG_0 0x40F01323 // MemConfig0 512MB config, 8 banks,Mapping Method[12:15]0:linear, 1:linterleaved, 2:Mixed #define DMC1_MEMCONFIG_1 0x60E00312 // MemConfig1 #define DMC1_TIMINGA_REF 0x00000618 // TimingAref 7.8us*133MHz=1038(0x40E), 100MHz=780(0x30C), 20MHz=156(0x9C), 10MHz=78(0x4 #define DMC1_TIMING_ROW 0x28233289 // TimingRow for @200MHz #define DMC1_TIMING_DATA 0x23240304 // TimingData CL=3 #define DMC1_TIMING_PWR 0x08280232 // TimingPower #endif #if 0 #define DMC0_MEMCONTROL 0x00212400 // MemControl BL=4, 1Chip, DDR2 Type, dynamic self refresh, force precharge, dynamic power down off #define DMC0_MEMCONFIG_0 0x20E01323 // MemConfig0 512MB config, 8 banks,Mapping Method[12:15]0:linear, 1:linterleaved, 2:Mixed #define DMC0_MEMCONFIG_1 0x40F01323 // MemConfig1 #define DMC0_TIMINGA_REF 0x00000618 // TimingAref 7.8us*133MHz=1038(0x40E), 100MHz=780(0x30C), 20MHz=156(0x9C), 10MHz=78(0x4E) #define DMC0_TIMING_ROW 0x28233287 // TimingRow for @200MHz #define DMC0_TIMING_DATA 0x23240304 // TimingData CL=3 #define DMC0_TIMING_PWR 0x09C80232 // TimingPower #define DMC1_MEMCONTROL 0x00202400 // MemControl BL=4, 2 chip, DDR2 type, dynamic self refresh, force precharge, dynamic power down off #define DMC1_MEMCONFIG_0 0x40C01323 // MemConfig0 512MB config, 8 banks,Mapping Method[12:15]0:linear, 1:linterleaved, 2:Mixed #define DMC1_MEMCONFIG_1 0x00E01323 // MemConfig1 #define DMC1_TIMINGA_REF 0x00000618 // TimingAref 7.8us*133MHz=1038(0x40E), 100MHz=780(0x30C), 20MHz=156(0x9C), 10MHz=78(0x4 #define DMC1_TIMING_ROW 0x28233289 // TimingRow for @200MHz #define DMC1_TIMING_DATA 0x23240304 // TimingData CL=3 #define DMC1_TIMING_PWR 0x08280232 // TimingPower #endif .global sdram_asm_init sdram_asm_init: ldr r0, =0xf1e00000 ldr r1, =0x0 str r1, [r0, #0x0] /* DMC0 Drive Strength (Setting 2X) */ ldr r0, =ELFIN_GPIO_BASE ldr r1, =0x0000AAAA str r1, [r0, #MP1_0DRV_SR_OFFSET] // 寄存器中对应0b10，就是2X ldr r1, =0x0000AAAA str r1, [r0, #MP1_1DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP1_2DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP1_3DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP1_4DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP1_5DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP1_6DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP1_7DRV_SR_OFFSET] ldr r1, =0x00002AAA str r1, [r0, #MP1_8DRV_SR_OFFSET] /* DMC1 Drive Strength (Setting 2X) */ ldr r0, =ELFIN_GPIO_BASE ldr r1, =0x0000AAAA str r1, [r0, #MP2_0DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP2_1DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP2_2DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP2_3DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP2_4DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP2_5DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP2_6DRV_SR_OFFSET] ldr r1, =0x0000AAAA str r1, [r0, #MP2_7DRV_SR_OFFSET] ldr r1, =0x00002AAA str r1, [r0, #MP2_8DRV_SR_OFFSET] /* DMC0 initialization at single Type*/ ldr r0, =APB_DMC_0_BASE ldr r1, =0x00101000 @PhyControl0 DLL parameter setting, manual 0x00101000 str r1, [r0, #DMC_PHYCONTROL0] ldr r1, =0x00000086 @PhyControl1 DLL parameter setting, LPDDR/LPDDR2 Case str r1, [r0, #DMC_PHYCONTROL1] ldr r1, =0x00101002 @PhyControl0 DLL on str r1, [r0, #DMC_PHYCONTROL0] ldr r1, =0x00101003 @PhyControl0 DLL start str r1, [r0, #DMC_PHYCONTROL0] find_lock_val: ldr r1, [r0, #DMC_PHYSTATUS] @Load Phystatus register value and r2, r1, #0x7 cmp r2, #0x7 @Loop until DLL is locked bne find_lock_val and r1, #0x3fc0 mov r2, r1, LSL #18 orr r2, r2, #0x100000 orr r2 ,r2, #0x1000 orr r1, r2, #0x3 @Force Value locking str r1, [r0, #DMC_PHYCONTROL0] #if 0 /* Memory margin test 10.01.05 */ orr r1, r2, #0x1 @DLL off str r1, [r0, #DMC_PHYCONTROL0] #endif /* setting DDR2 */ ldr r1, =0x0FFF2010 @ConControl auto refresh off str r1, [r0, #DMC_CONCONTROL] ldr r1, =DMC0_MEMCONTROL @MemControl BL=4, 1 chip, DDR2 type, dynamic self refresh, force precharge, dynamic power down off str r1, [r0, #DMC_MEMCONTROL] ldr r1, =DMC0_MEMCONFIG_0 @MemConfig0 256MB config, 8 banks,Mapping Method[12:15]0:linear, 1:linterleaved, 2:Mixed str r1, [r0, #DMC_MEMCONFIG0] ldr r1, =DMC0_MEMCONFIG_1 @MemConfig1 str r1, [r0, #DMC_MEMCONFIG1] ldr r1, =0xFF000000 @PrechConfig str r1, [r0, #DMC_PRECHCONFIG] ldr r1, =DMC0_TIMINGA_REF @TimingAref 7.8us*133MHz=1038(0x40E), 100MHz=780(0x30C), 20MHz=156(0x9C), 10MHz=78(0x4E) str r1, [r0, #DMC_TIMINGAREF] ldr r1, =DMC0_TIMING_ROW @TimingRow for @200MHz str r1, [r0, #DMC_TIMINGROW] ldr r1, =DMC0_TIMING_DATA @TimingData CL=3 str r1, [r0, #DMC_TIMINGDATA] ldr r1, =DMC0_TIMING_PWR @TimingPower str r1, [r0, #DMC_TIMINGPOWER] ldr r1, =0x07000000 @DirectCmd chip0 Deselect str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x01000000 @DirectCmd chip0 PALL str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00020000 @DirectCmd chip0 EMRS2 str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00030000 @DirectCmd chip0 EMRS3 str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00010400 @DirectCmd chip0 EMRS1 (MEM DLL on, DQS# disable) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00000542 @DirectCmd chip0 MRS (MEM DLL reset) CL=4, BL=4 str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x01000000 @DirectCmd chip0 PALL str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x05000000 @DirectCmd chip0 REFA str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x05000000 @DirectCmd chip0 REFA str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00000442 @DirectCmd chip0 MRS (MEM DLL unreset) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00010780 @DirectCmd chip0 EMRS1 (OCD default) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00010400 @DirectCmd chip0 EMRS1 (OCD exit) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x07100000 @DirectCmd chip1 Deselect str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x01100000 @DirectCmd chip1 PALL str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00120000 @DirectCmd chip1 EMRS2 str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00130000 @DirectCmd chip1 EMRS3 str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00110400 @DirectCmd chip1 EMRS1 (MEM DLL on, DQS# disable) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00100542 @DirectCmd chip1 MRS (MEM DLL reset) CL=4, BL=4 str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x01100000 @DirectCmd chip1 PALL str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x05100000 @DirectCmd chip1 REFA str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x05100000 @DirectCmd chip1 REFA str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00100442 @DirectCmd chip1 MRS (MEM DLL unreset) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00110780 @DirectCmd chip1 EMRS1 (OCD default) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00110400 @DirectCmd chip1 EMRS1 (OCD exit) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x0FF02030 @ConControl auto refresh on str r1, [r0, #DMC_CONCONTROL] ldr r1, =0xFFFF00FF @PwrdnConfig str r1, [r0, #DMC_PWRDNCONFIG] ldr r1, =0x00202400 @MemControl BL=4, 2 chip, DDR2 type, dynamic self refresh, force precharge, dynamic power down off str r1, [r0, #DMC_MEMCONTROL] // 上面是DRAM0初始化步骤 /*******************************************************************************************/ // 下面是DRAM1初始化步骤，两者没有联系，是并列的。 /* DMC1 initialization */ ldr r0, =APB_DMC_1_BASE ldr r1, =0x00101000 @Phycontrol0 DLL parameter setting str r1, [r0, #DMC_PHYCONTROL0] ldr r1, =0x00000086 @Phycontrol1 DLL parameter setting str r1, [r0, #DMC_PHYCONTROL1] ldr r1, =0x00101002 @PhyControl0 DLL on str r1, [r0, #DMC_PHYCONTROL0] ldr r1, =0x00101003 @PhyControl0 DLL start str r1, [r0, #DMC_PHYCONTROL0] find_lock_val1: ldr r1, [r0, #DMC_PHYSTATUS] @Load Phystatus register value and r2, r1, #0x7 cmp r2, #0x7 @Loop until DLL is locked bne find_lock_val1 and r1, #0x3fc0 mov r2, r1, LSL #18 orr r2, r2, #0x100000 orr r2, r2, #0x1000 orr r1, r2, #0x3 @Force Value locking str r1, [r0, #DMC_PHYCONTROL0] #if 0 /* Memory margin test 10.01.05 */ orr r1, r2, #0x1 @DLL off str r1, [r0, #DMC_PHYCONTROL0] #endif /* settinf fot DDR2 */ ldr r0, =APB_DMC_1_BASE ldr r1, =0x0FFF2010 @auto refresh off str r1, [r0, #DMC_CONCONTROL] ldr r1, =DMC1_MEMCONTROL @MemControl BL=4, 2 chip, DDR2 type, dynamic self refresh, force precharge, dynamic power down off str r1, [r0, #DMC_MEMCONTROL] ldr r1, =DMC1_MEMCONFIG_0 @MemConfig0 512MB config, 8 banks,Mapping Method[12:15]0:linear, 1:linterleaved, 2:Mixed str r1, [r0, #DMC_MEMCONFIG0] ldr r1, =DMC1_MEMCONFIG_1 @MemConfig1 str r1, [r0, #DMC_MEMCONFIG1] ldr r1, =0xFF000000 str r1, [r0, #DMC_PRECHCONFIG] ldr r1, =DMC1_TIMINGA_REF @TimingAref 7.8us*133MHz=1038(0x40E), 100MHz=780(0x30C), 20MHz=156(0x9C), 10MHz=78(0x4 str r1, [r0, #DMC_TIMINGAREF] ldr r1, =DMC1_TIMING_ROW @TimingRow for @200MHz str r1, [r0, #DMC_TIMINGROW] ldr r1, =DMC1_TIMING_DATA @TimingData CL=3 str r1, [r0, #DMC_TIMINGDATA] ldr r1, =DMC1_TIMING_PWR @TimingPower str r1, [r0, #DMC_TIMINGPOWER] ldr r1, =0x07000000 @DirectCmd chip0 Deselect str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x01000000 @DirectCmd chip0 PALL str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00020000 @DirectCmd chip0 EMRS2 str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00030000 @DirectCmd chip0 EMRS3 str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00010400 @DirectCmd chip0 EMRS1 (MEM DLL on, DQS# disable) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00000542 @DirectCmd chip0 MRS (MEM DLL reset) CL=4, BL=4 str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x01000000 @DirectCmd chip0 PALL str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x05000000 @DirectCmd chip0 REFA str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x05000000 @DirectCmd chip0 REFA str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00000442 @DirectCmd chip0 MRS (MEM DLL unreset) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00010780 @DirectCmd chip0 EMRS1 (OCD default) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00010400 @DirectCmd chip0 EMRS1 (OCD exit) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x07100000 @DirectCmd chip1 Deselect str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x01100000 @DirectCmd chip1 PALL str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00120000 @DirectCmd chip1 EMRS2 str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00130000 @DirectCmd chip1 EMRS3 str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00110440 @DirectCmd chip1 EMRS1 (MEM DLL on, DQS# disable) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00100542 @DirectCmd chip1 MRS (MEM DLL reset) CL=4, BL=4 str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x01100000 @DirectCmd chip1 PALL str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x05100000 @DirectCmd chip1 REFA str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x05100000 @DirectCmd chip1 REFA str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00100442 @DirectCmd chip1 MRS (MEM DLL unreset) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00110780 @DirectCmd chip1 EMRS1 (OCD default) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x00110400 @DirectCmd chip1 EMRS1 (OCD exit) str r1, [r0, #DMC_DIRECTCMD] ldr r1, =0x0FF02030 @ConControl auto refresh on str r1, [r0, #DMC_CONCONTROL] ldr r1, =0xFFFF00FF @PwrdnConfig str r1, [r0, #DMC_PWRDNCONFIG] ldr r1, =DMC1_MEMCONTROL @MemControl BL=4, 2 chip, DDR2 type, dynamic self refresh, force precharge, dynamic power down off str r1, [r0, #DMC_MEMCONTROL] // 函数返回 mov pc, lr
6、s5pv210.h
/* S5PC110 device base addresses */ #define ELFIN_DMA_BASE 0xE0900000 #define ELFIN_LCD_BASE 0xF8000000 #define ELFIN_USB_HOST_BASE 0xEC200000 #define ELFIN_I2C_BASE 0xE1800000 #define ELFIN_I2S_BASE 0xE2100000 #define ELFIN_ADC_BASE 0xE1700000 #define ELFIN_SPI_BASE 0xE1300000 #define ELFIN_HSMMC_0_BASE 0xEB000000 #define ELFIN_HSMMC_1_BASE 0xEB100000 #define ELFIN_HSMMC_2_BASE 0xEB200000 #define ELFIN_HSMMC_3_BASE 0xEB300000 #define ELFIN_CLOCK_POWER_BASE 0xE0100000 #define IO_RET_REL ((1 << 31) | (1 << 29) | (1 << 28)) /* Clock & Power Controller for s5pc110*/ #define APLL_LOCK_OFFSET 0x00 #define MPLL_LOCK_OFFSET 0x08 #define EPLL_LOCK_OFFSET 0x10 #define VPLL_LOCK_OFFSET 0x20 #define APLL_CON0_OFFSET 0x100 #define APLL_CON1_OFFSET 0x104 #define MPLL_CON_OFFSET 0x108 #define EPLL_CON_OFFSET 0x110 #define VPLL_CON_OFFSET 0x120 #define CLK_SRC0_OFFSET 0x200 #define CLK_SRC1_OFFSET 0x204 #define CLK_SRC2_OFFSET 0x208 #define CLK_SRC3_OFFSET 0x20c #define CLK_SRC4_OFFSET 0x210 #define CLK_SRC5_OFFSET 0x214 #define CLK_SRC6_OFFSET 0x218 #define CLK_SRC_MASK0_OFFSET 0x280 #define CLK_SRC_MASK1_OFFSET 0x284 #define CLK_DIV0_OFFSET 0x300 #define CLK_DIV1_OFFSET 0x304 #define CLK_DIV2_OFFSET 0x308 #define CLK_DIV3_OFFSET 0x30c #define CLK_DIV4_OFFSET 0x310 #define CLK_DIV5_OFFSET 0x314 #define CLK_DIV6_OFFSET 0x318 #define CLK_DIV7_OFFSET 0x31c #define CLK_GATE_IP0_OFFSET 0x460 #define CLK_GATE_IP1_OFFSET 0x464 #define CLK_GATE_IP2_OFFSET 0x468 #define CLK_GATE_IP3_OFFSET 0x46c #define CLK_GATE_IP4_OFFSET 0x470 #define CLK_GATE_BLOCK_OFFSET 0x480 #define CLK_OUT_OFFSET 0x500 #define CLK_DIV_STAT0_OFFSET 0x1000 #define CLK_DIV_STAT1_OFFSET 0x1004 #define CLK_MUX_STAT0_OFFSET 0x1100 #define CLK_MUX_STAT1_OFFSET 0x1104 #define SW_RST_OFFSET 0x2000 #define ONEDRAM_CFG_OFFSET 0x6208 #define OSC_CON_OFFSET 0x8000 #define RST_STAT_OFFSET 0xa000 #define PWR_CFG_OFFSET 0xc000 #define EINT_WAKEUP_MASK_OFFSET 0xc004 #define WAKEUP_MASK_OFFSET 0xc008 #define NORMAL_CFG_OFFSET 0xc010 #define IDLE_CFG_OFFSET 0xc020 #define STOP_CFG_OFFSET 0xc030 #define STOP_MEM_CFG_OFFSET 0xc034 #define SLEEP_CFG_OFFSET 0xc040 #define OSC_FREQ_OFFSET 0xc100 #define OSC_STABLE_OFFSET 0xc104 #define PWR_STABLE_OFFSET 0xc108 #define MTC_STABLE_OFFSET 0xc110 #define CLAMP_STABLE_OFFSET 0xc114 #define WAKEUP_STAT_OFFSET 0xc200 #define BLK_PWR_STAT_OFFSET 0xc204 #define BODY_BIAS_CON_OFFSET 0xc300 #define ION_SKEW_CON_OFFSET 0xc310 #define ION_SKEW_MON_OFFSET 0xc314 #define IOFF_SKEW_CON_OFFSET 0xc320 #define IOFF_SKEW_MON_OFFSET 0xc324 #define OTHERS_OFFSET 0xe000 #define OM_STAT_OFFSET 0xe100 #define MIE_CONTROL_OFFSET 0xe800 #define HDMI_CONTROL_OFFSET 0xe804 #define USB_PHY_CONTROL_OFFSET 0xe80c #define DAC_CONTROL_OFFSET 0xe810 #define MIPI_DPHY_CONTROL_OFFSET 0xe814 #define ADC_CONTROL_OFFSET 0xe818 #define PS_HOLD_CONTROL_OFFSET 0xe81c #define INFORM0_OFFSET 0xf000 #define INFORM1_OFFSET 0xf004 #define INFORM2_OFFSET 0xf008 #define INFORM3_OFFSET 0xf00c #define INFORM4_OFFSET 0xf010 #define INFORM5_OFFSET 0xf014 #define INFORM6_OFFSET 0xf018 #define INFORM7_OFFSET 0xf01c #define INF_REG0_OFFSET 0x00 #define INF_REG1_OFFSET 0x04 #define INF_REG2_OFFSET 0x08 #define INF_REG3_OFFSET 0x0c #define INF_REG4_OFFSET 0x10 #define INF_REG5_OFFSET 0x14 #define INF_REG6_OFFSET 0x18 #define INF_REG7_OFFSET 0x1c /* * GPIO */ #define ELFIN_GPIO_BASE 0xE0200000 #define GPA0CON_OFFSET 0x000 #define GPA0DAT_OFFSET 0x004 #define GPA0PUD_OFFSET 0x008 #define GPA0DRV_SR_OFFSET 0x00C #define GPA0CONPDN_OFFSET 0x010 #define GPA0PUDPDN_OFFSET 0x014 #define GPA1CON_OFFSET 0x020 #define GPA1DAT_OFFSET 0x024 #define GPA1PUD_OFFSET 0x028 #define GPA1DRV_SR_OFFSET 0x02C #define GPA1CONPDN_OFFSET 0x030 #define GPA1PUDPDN_OFFSET 0x034 #define GPBCON_OFFSET 0x040 #define GPBDAT_OFFSET 0x044 #define GPBPUD_OFFSET 0x048 #define GPBDRV_SR_OFFSET 0x04C #define GPBCONPDN_OFFSET 0x050 #define GPBPUDPDN_OFFSET 0x054 #define GPC0CON_OFFSET 0x060 #define GPC0DAT_OFFSET 0x064 #define GPC0PUD_OFFSET 0x068 #define GPC0DRV_SR_OFFSET 0x06C #define GPC0CONPDN_OFFSET 0x070 #define GPC0PUDPDN_OFFSET 0x074 #define GPC1CON_OFFSET 0x080 #define GPC1DAT_OFFSET 0x084 #define GPC1PUD_OFFSET 0x088 #define GPC1DRV_SR_OFFSET 0x08C #define GPC1CONPDN_OFFSET 0x090 #define GPC1PUDPDN_OFFSET 0x094 #define GPD0CON_OFFSET 0x0A0 #define GPD0DAT_OFFSET 0x0A4 #define GPD0PUD_OFFSET 0x0A8 #define GPD0DRV_SR_OFFSET 0x0AC #define GPD0CONPDN_OFFSET 0x0B0 #define GPD0PUDPDN_OFFSET 0x0B4 #define GPD1CON_OFFSET 0x0C0 #define GPD1DAT_OFFSET 0x0C4 #define GPD1PUD_OFFSET 0x0C8 #define GPD1DRV_SR_OFFSET 0x0CC #define GPD1CONPDN_OFFSET 0x0D0 #define GPD1PUDPDN_OFFSET 0x0D4 #define GPE0CON_OFFSET 0x0E0 #define GPE0DAT_OFFSET 0x0E4 #define GPE0PUD_OFFSET 0x0E8 #define GPE0DRV_SR_OFFSET 0x0EC #define GPE0CONPDN_OFFSET 0x0F0 #define GPE0PUDPDN_OFFSET 0x0F4 #define GPE1CON_OFFSET 0x100 #define GPE1DAT_OFFSET 0x104 #define GPE1PUD_OFFSET 0x108 #define GPE1DRV_SR_OFFSET 0x10C #define GPE1CONPDN_OFFSET 0x110 #define GPE1PUDPDN_OFFSET 0x114 #define GPF0CON_OFFSET 0x120 #define GPF0DAT_OFFSET 0x124 #define GPF0PUD_OFFSET 0x128 #define GPF0DRV_SR_OFFSET 0x12C #define GPF0CONPDN_OFFSET 0x130 #define GPF0PUDPDN_OFFSET 0x134 #define GPF1CON_OFFSET 0x140 #define GPF1DAT_OFFSET 0x144 #define GPF1PUD_OFFSET 0x148 #define GPF1DRV_SR_OFFSET 0x14C #define GPF1CONPDN_OFFSET 0x150 #define GPF1PUDPDN_OFFSET 0x154 #define GPF2CON_OFFSET 0x160 #define GPF2DAT_OFFSET 0x164 #define GPF2PUD_OFFSET 0x168 #define GPF2DRV_SR_OFFSET 0x16C #define GPF2CONPDN_OFFSET 0x170 #define GPF2PUDPDN_OFFSET 0x174 #define GPF3CON_OFFSET 0x180 #define GPF3DAT_OFFSET 0x184 #define GPF3PUD_OFFSET 0x188 #define GPF3DRV_SR_OFFSET 0x18C #define GPF3CONPDN_OFFSET 0x190 #define GPF3PUDPDN_OFFSET 0x194 #define GPG0CON_OFFSET 0x1A0 #define GPG0DAT_OFFSET 0x1A4 #define GPG0PUD_OFFSET 0x1A8 #define GPG0DRV_SR_OFFSET 0x1AC #define GPG0CONPDN_OFFSET 0x1B0 #define GPG0PUDPDN_OFFSET 0x1B4 #define GPG1CON_OFFSET 0x1C0 #define GPG1DAT_OFFSET 0x1C4 #define GPG1PUD_OFFSET 0x1C8 #define GPG1DRV_SR_OFFSET 0x1CC #define GPG1CONPDN_OFFSET 0x1D0 #define GPG1PUDPDN_OFFSET 0x1D4 #define GPG2CON_OFFSET 0x1E0 #define GPG2DAT_OFFSET 0x1E4 #define GPG2PUD_OFFSET 0x1E8 #define GPG2DRV_SR_OFFSET 0x1EC #define GPG2CONPDN_OFFSET 0x1F0 #define GPG2PUDPDN_OFFSET 0x1F4 #define GPG3CON_OFFSET 0x200 #define GPG3DAT_OFFSET 0x204 #define GPG3PUD_OFFSET 0x208 #define GPG3DRV_SR_OFFSET 0x20C #define GPG3CONPDN_OFFSET 0x210 #define GPG3PUDPDN_OFFSET 0x214 #define MP1_0DRV_SR_OFFSET 0x3CC #define MP1_1DRV_SR_OFFSET 0x3EC #define MP1_2DRV_SR_OFFSET 0x40C #define MP1_3DRV_SR_OFFSET 0x42C #define MP1_4DRV_SR_OFFSET 0x44C #define MP1_5DRV_SR_OFFSET 0x46C #define MP1_6DRV_SR_OFFSET 0x48C #define MP1_7DRV_SR_OFFSET 0x4AC #define MP1_8DRV_SR_OFFSET 0x4CC #define MP2_0DRV_SR_OFFSET 0x4EC #define MP2_1DRV_SR_OFFSET 0x50C #define MP2_2DRV_SR_OFFSET 0x52C #define MP2_3DRV_SR_OFFSET 0x54C #define MP2_4DRV_SR_OFFSET 0x56C #define MP2_5DRV_SR_OFFSET 0x58C #define MP2_6DRV_SR_OFFSET 0x5AC #define MP2_7DRV_SR_OFFSET 0x5CC #define MP2_8DRV_SR_OFFSET 0x5EC /* GPH0 */ #define GPH0CON_OFFSET 0xc00 #define GPH0DAT_OFFSET 0xc04 #define GPH0PUD_OFFSET 0xc08 #define GPH0DRV_OFFSET 0xc0c /* GPH1 */ #define GPH1CON_OFFSET 0xc20 #define GPH1DAT_OFFSET 0xc24 #define GPH1PUD_OFFSET 0xc28 #define GPH1DRV_OFFSET 0xc2c /* GPH2 */ #define GPH2CON_OFFSET 0xc40 #define GPH2DAT_OFFSET 0xc44 #define GPH2PUD_OFFSET 0xc48 #define GPH2DRV_OFFSET 0xc4c /* GPH3 */ #define GPH3CON_OFFSET 0xc60 #define GPH3DAT_OFFSET 0xc64 #define GPH3PUD_OFFSET 0xc68 #define GPH3DRV_OFFSET 0xc6c #define GPICON_OFFSET 0x220 #define GPIPUD_OFFSET 0x228 #define GPIDRV_OFFSET_SR 0x22C #define GPIPUDPDN_OFFSET 0x234 #define GPJ0CON_OFFSET 0x240 #define GPJ0DAT_OFFSET 0x244 #define GPJ0PUD_OFFSET 0x248 #define GPJ0DRV_SR_OFFSET 0x24C #define GPJ0CONPDN_OFFSET 0x250 #define GPJ0PUDPDN_OFFSET 0x254 #define GPJ1CON_OFFSET 0x260 #define GPJ1DAT_OFFSET 0x264 #define GPJ1PUD_OFFSET 0x268 #define GPJ1DRV_SR_OFFSET 0x26C #define GPJ1CONPDN_OFFSET 0x270 #define GPJ1PUDPDN_OFFSET 0x274 #define GPJ2CON_OFFSET 0x280 #define GPJ2DAT_OFFSET 0x284 #define GPJ2PUD_OFFSET 0x288 #define GPJ2DRV_SR_OFFSET 0x28C #define GPJ2CONPDN_OFFSET 0x290 #define GPJ2PUDPDN_OFFSET 0x294 #define GPJ3CON_OFFSET 0x2A0 #define GPJ3DAT_OFFSET 0x2A4 #define GPJ3PUD_OFFSET 0x2A8 #define GPJ3DRV_SR_OFFSET 0x2AC #define GPJ3CONPDN_OFFSET 0x2B0 #define GPJ3PUDPDN_OFFSET 0x2B4 #define GPJ4CON_OFFSET 0x2C0 #define GPJ4DAT_OFFSET 0x2C4 #define GPJ4PUD_OFFSET 0x2C8 #define GPJ4DRV_SR_OFFSET 0x2CC #define GPJ4CONPDN_OFFSET 0x2D0 #define GPJ4PUDPDN_OFFSET 0x2D4 /* * Interrupt */ #define ELFIN_VIC0_BASE_ADDR (0xF2000000) #define ELFIN_VIC1_BASE_ADDR (0xF2100000) #define ELFIN_VIC2_BASE_ADDR (0xF2200000) #define ELFIN_TZIC0_BASE_ADDR (0xF2800000) #define ELFIN_TZIC1_BASE_ADDR (0xF2900000) #define ELFIN_TZIC2_BASE_ADDR (0xF2A00000) #define oINTMOD (0x0C) // VIC INT SELECT (IRQ or FIQ) #define oINTUNMSK (0x10) // VIC INT EN (Unmask by writing 1) #define oINTMSK (0x14) // VIC INT EN CLEAR (Mask by writing 1) #define oINTSUBMSK (0x1C) // VIC SOFT INT CLEAR #define oVECTADDR (0xF00) // VIC ADDRESS /* * Watchdog timer */ #define ELFIN_WATCHDOG_BASE 0xE2700000 #define WTCON_OFFSET 0x00 #define WTDAT_OFFSET 0x08 #define WTCNT_OFFSET 0x0C #define WTCON_REG __REG(ELFIN_WATCHDOG_BASE+WTCON_OFFSET) #define WTDAT_REG __REG(ELFIN_WATCHDOG_BASE+WTDAT_OFFSET) #define WTCNT_REG __REG(ELFIN_WATCHDOG_BASE+WTCNT_OFFSET) /* * UART */ #define ELFIN_UART_BASE 0XE2900000 #define ELFIN_UART0_OFFSET 0x0000 #define ELFIN_UART1_OFFSET 0x0400 #define ELFIN_UART2_OFFSET 0x0800 #define ELFIN_UART3_OFFSET 0x0c00 #if defined(CONFIG_SERIAL0) #define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET) #elif defined(CONFIG_SERIAL1) #define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART1_OFFSET) #elif defined(CONFIG_SERIAL2) #define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART2_OFFSET) #elif defined(CONFIG_SERIAL3) #define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART3_OFFSET) #else #define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET) #endif #define ULCON_OFFSET 0x00 #define UCON_OFFSET 0x04 #define UFCON_OFFSET 0x08 #define UMCON_OFFSET 0x0C #define UTRSTAT_OFFSET 0x10 #define UERSTAT_OFFSET 0x14 #define UFSTAT_OFFSET 0x18 #define UMSTAT_OFFSET 0x1C #define UTXH_OFFSET 0x20 #define URXH_OFFSET 0x24 #define UBRDIV_OFFSET 0x28 #define UDIVSLOT_OFFSET 0x2C #define UINTP_OFFSET 0x30 #define UINTSP_OFFSET 0x34 #define UINTM_OFFSET 0x38 #define UTRSTAT_TX_EMPTY BIT2 #define UTRSTAT_RX_READY BIT0 #define UART_ERR_MASK 0xF /* * PWM timer */ #define ELFIN_TIMER_BASE 0xE2500000 #define TCFG0_REG __REG(0xE2500000) #define TCFG1_REG __REG(0xE2500004) #define TCON_REG __REG(0xE2500008) #define TCNTB0_REG __REG(0xE250000c) #define TCMPB0_REG __REG(0xE2500010) #define TCNTO0_REG __REG(0xE2500014) #define TCNTB1_REG __REG(0xE2500018) #define TCMPB1_REG __REG(0xE250001c) #define TCNTO1_REG __REG(0xE2500020) #define TCNTB2_REG __REG(0xE2500024) #define TCMPB2_REG __REG(0xE2500028) #define TCNTO2_REG __REG(0xE250002c) #define TCNTB3_REG __REG(0xE2500030) #define TCMPB3_REG __REG(0xE2500034) #define TCNTO3_REG __REG(0xE2500038) #define TCNTB4_REG __REG(0xE250003c) #define TCNTO4_REG __REG(0xE2500040) #define TINT_CSTAT __REG(0xE2500044) /* Fields */ #define fTCFG0_DZONE Fld(8,16) /* the dead zone length (= timer 0) */ #define fTCFG0_PRE1 Fld(8,8) /* prescaler value for time 2,3,4 */ #define fTCFG0_PRE0 Fld(8,0) /* prescaler value for time 0,1 */ #define fTCFG1_MUX4 Fld(4,16) /* bits */ #define TCFG0_DZONE(x) FInsrt((x), fTCFG0_DZONE) #define TCFG0_PRE1(x) FInsrt((x), fTCFG0_PRE1) #define TCFG0_PRE0(x) FInsrt((x), fTCFG0_PRE0) #define TCON_4_AUTO (1 << 22) /* auto reload on/off for Timer 4 */ #define TCON_4_UPDATE (1 << 21) /* manual Update TCNTB4 */ #define TCON_4_ONOFF (1 << 20) /* 0: Stop, 1: start Timer 4 */ #define COUNT_4_ON (TCON_4_ONOFF*1) #define COUNT_4_OFF (TCON_4_ONOFF*0) #define TCON_3_AUTO (1 << 19) /* auto reload on/off for Timer 3 */ #define TIMER3_ATLOAD_ON (TCON_3_AUTO*1) #define TIMER3_ATLAOD_OFF FClrBit(TCON, TCON_3_AUTO) #define TCON_3_INVERT (1 << 18) /* 1: Inverter on for TOUT3 */ #define TIMER3_IVT_ON (TCON_3_INVERT*1) #define TIMER3_IVT_OFF (FClrBit(TCON, TCON_3_INVERT)) #define TCON_3_MAN (1 << 17) /* manual Update TCNTB3,TCMPB3 */ #define TIMER3_MANUP (TCON_3_MAN*1) #define TIMER3_NOP (FClrBit(TCON, TCON_3_MAN)) #define TCON_3_ONOFF (1 << 16) /* 0: Stop, 1: start Timer 3 */ #define TIMER3_ON (TCON_3_ONOFF*1) #define TIMER3_OFF (FClrBit(TCON, TCON_3_ONOFF)) /* macros */ #define GET_PRESCALE_TIMER4(x) FExtr((x), fTCFG0_PRE1) #define GET_DIVIDER_TIMER4(x) FExtr((x), fTCFG1_MUX4) #define MP01CON_OFFSET 0x2E0 #define MP01DAT_OFFSET 0x2E4 #define MP01PUD_OFFSET 0x2E8 #define MP01DRV_SR_OFFSET 0x2EC #define MP01CONPDN_OFFSET 0x2E0 #define MP01PUDPDN_OFFSET 0x2E4 #define MP02CON_OFFSET 0x300 #define MP02DAT_OFFSET 0x304 #define MP02PUD_OFFSET 0x308 #define MP02DRV_SR_OFFSET 0x30c #define MP02CONPDN_OFFSET 0x310 #define MP02PUDPDN_OFFSET 0x314 #define MP03CON_OFFSET 0x320 #define MP03DAT_OFFSET 0x324 #define MP03PUD_OFFSET 0x328 #define MP03DRV_SR_OFFSET 0x32c #define MP03CONPDN_OFFSET 0x330 #define MP03PUDPDN_OFFSET 0x334 #define MP06CON_OFFSET 0x380 #define MP06DAT_OFFSET 0x384 #define MP06PUD_OFFSET 0x388 #define MP06DRV_SR_OFFSET 0x38C #define MP06CONPDN_OFFSET 0x390 #define MP06PUDPDN_OFFSET 0x394 #define MP07CON_OFFSET 0x3A0 #define MP07DAT_OFFSET 0x3A4 #define MP07PUD_OFFSET 0x3A8 #define MP07DRV_SR_OFFSET 0x3AC #define MP07CONPDN_OFFSET 0x3B0 #define MP07PUDPDN_OFFSET 0x3B4 /* * Nand flash controller */ #define ELFIN_NAND_BASE 0xB0E00000 #define ELFIN_NAND_ECC_BASE 0xB0E20000 #define NFCONF_OFFSET 0x00 #define NFCONT_OFFSET 0x04 #define NFCMMD_OFFSET 0x08 #define NFADDR_OFFSET 0x0c #define NFDATA_OFFSET 0x10 #define NFMECCDATA0_OFFSET 0x14 #define NFMECCDATA1_OFFSET 0x18 #define NFSECCDATA0_OFFSET 0x1c #define NFSBLK_OFFSET 0x20 #define NFEBLK_OFFSET 0x24 #define NFSTAT_OFFSET 0x28 #define NFESTAT0_OFFSET 0x2c #define NFESTAT1_OFFSET 0x30 #define NFMECC0_OFFSET 0x34 #define NFMECC1_OFFSET 0x38 #define NFSECC_OFFSET 0x3c #define NFMLCBITPT_OFFSET 0x40 #define NFECCCONF_OFFSET 0x000 // R/W ECC configuration register 0x0000_0000 #define NFECCCONT_OFFSET 0x020 // R/W ECC control register 0x0000_0000 #define NFECCSTAT_OFFSET 0x030 // R ECC status register 0x0000_0000 #define NFECCSECSTAT_OFFSET 0x040 // R ECC sector status register 0x0000_0000 #define NFECCPRGECC0_OFFSET 0x090 // R ECC parity code0 register for page program 0x0000_0000 #define NFECCPRGECC1_OFFSET 0x094 // R ECC parity code1 register for page program 0x0000_0000 #define NFECCPRGECC2_OFFSET 0x098 // R ECC parity code2 register for page program 0x0000_0000 #define NFECCPRGECC3_OFFSET 0x09C // R ECC parity code3 register for page program 0x0000_0000 #define NFECCPRGECC4_OFFSET 0x0A0 // R ECC parity code4 register for page program 0x0000_0000 #define NFECCPRGECC5_OFFSET 0x0A4 // R ECC parity code5 register for page program 0x0000_0000 #define NFECCPRGECC6_OFFSET 0x0A8 // R ECC parity code6 register for page program 0x0000_0000 #define NFECCERL0_OFFSET 0x0C0 // R ECC error byte location0 register 0x0000_0000 #define NFECCERL1_OFFSET 0x0C4 // R ECC error byte location1 register 0x0000_0000 #define NFECCERL2_OFFSET 0x0C8 // R ECC error byte location2 register 0x0000_0000 #define NFECCERL3_OFFSET 0x0CC // R ECC error byte location3 register 0x0000_0000 #define NFECCERL4_OFFSET 0x0D0 // R ECC error byte location4 register 0x0000_0000 #define NFECCERL5_OFFSET 0x0D4 // R ECC error byte location5 register 0x0000_0000 #define NFECCERL6_OFFSET 0x0D8 // R ECC error byte location6 register 0x0000_0000 #define NFECCERL7_OFFSET 0x0DC // R ECC error byte location7 register 0x0000_0000 #define NFECCERP0_OFFSET 0x0F0 // R ECC error bit pattern0 register 0x0000_0000 #define NFECCERP1_OFFSET 0x0F4 // R ECC error bit pattern1 register 0x0000_0000 #define NFECCERP2_OFFSET 0x0F8 // R ECC error bit pattern2 register 0x0000_0000 #define NFECCERP3_OFFSET 0x0FC // R ECC error bit pattern3 register 0x0000_0000 #define NFECCCONECC0_OFFSET 0x110 // R/W ECC parity conversion code0 register 0x0000_0000 #define NFECCCONECC1_OFFSET 0x114 // R/W ECC parity conversion code1 register 0x0000_0000 #define NFECCCONECC2_OFFSET 0x118 // R/W ECC parity conversion code2 register 0x0000_0000 #define NFECCCONECC3_OFFSET 0x11C // R/W ECC parity conversion code3 register 0x0000_0000 #define NFECCCONECC4_OFFSET 0x120 // R/W ECC parity conversion code4 register 0x0000_0000 #define NFECCCONECC5_OFFSET 0x124 // R/W ECC parity conversion code5 register 0x0000_0000 #define NFECCCONECC6_OFFSET 0x128 // R/W ECC parity conversion code6 register 0x0000_0000 #define NFCONF (ELFIN_NAND_BASE+NFCONF_OFFSET) #define NFCONT (ELFIN_NAND_BASE+NFCONT_OFFSET) #define NFCMMD (ELFIN_NAND_BASE+NFCMMD_OFFSET) #define NFADDR (ELFIN_NAND_BASE+NFADDR_OFFSET) #define NFDATA (ELFIN_NAND_BASE+NFDATA_OFFSET) #define NFMECCDATA0 (ELFIN_NAND_BASE+NFMECCDATA0_OFFSET) #define NFMECCDATA1 (ELFIN_NAND_BASE+NFMECCDATA1_OFFSET) #define NFSECCDATA0 (ELFIN_NAND_BASE+NFSECCDATA0_OFFSET) #define NFSBLK (ELFIN_NAND_BASE+NFSBLK_OFFSET) #define NFEBLK (ELFIN_NAND_BASE+NFEBLK_OFFSET) #define NFSTAT (ELFIN_NAND_BASE+NFSTAT_OFFSET) #define NFESTAT0 (ELFIN_NAND_BASE+NFESTAT0_OFFSET) #define NFESTAT1 (ELFIN_NAND_BASE+NFESTAT1_OFFSET) #define NFMECC0 (ELFIN_NAND_BASE+NFMECC0_OFFSET) #define NFMECC1 (ELFIN_NAND_BASE+NFMECC1_OFFSET) #define NFSECC (ELFIN_NAND_BASE+NFSECC_OFFSET) #define NFMLCBITPT (ELFIN_NAND_BASE+NFMLCBITPT_OFFSET) #define NFECCCONF (ELFIN_NAND_ECC_BASE+NFECCCONF_OFFSET) #define NFECCCONT (ELFIN_NAND_ECC_BASE+NFECCCONT_OFFSET) #define NFECCSTAT (ELFIN_NAND_ECC_BASE+NFECCSTAT_OFFSET) #define NFECCSECSTAT (ELFIN_NAND_ECC_BASE+NFECCSECSTAT_OFFSET) #define NFECCPRGECC0 (ELFIN_NAND_ECC_BASE+NFECCPRGECC0_OFFSET) #define NFECCPRGECC1 (ELFIN_NAND_ECC_BASE+NFECCPRGECC1_OFFSET) #define NFECCPRGECC2 (ELFIN_NAND_ECC_BASE+NFECCPRGECC2_OFFSET) #define NFECCPRGECC3 (ELFIN_NAND_ECC_BASE+NFECCPRGECC3_OFFSET) #define NFECCPRGECC4 (ELFIN_NAND_ECC_BASE+NFECCPRGECC4_OFFSET) #define NFECCPRGECC5 (ELFIN_NAND_ECC_BASE+NFECCPRGECC5_OFFSET) #define NFECCPRGECC6 (ELFIN_NAND_ECC_BASE+NFECCPRGECC6_OFFSET) #define NFECCERL0 (ELFIN_NAND_ECC_BASE+NFECCERL0_OFFSET) #define NFECCERL1 (ELFIN_NAND_ECC_BASE+NFECCERL1_OFFSET) #define NFECCERL2 (ELFIN_NAND_ECC_BASE+NFECCERL2_OFFSET) #define NFECCERL3 (ELFIN_NAND_ECC_BASE+NFECCERL3_OFFSET) #define NFECCERL4 (ELFIN_NAND_ECC_BASE+NFECCERL4_OFFSET) #define NFECCERL5 (ELFIN_NAND_ECC_BASE+NFECCERL5_OFFSET) #define NFECCERL6 (ELFIN_NAND_ECC_BASE+NFECCERL6_OFFSET) #define NFECCERL7 (ELFIN_NAND_ECC_BASE+NFECCERL7_OFFSET) #define NFECCERP0 (ELFIN_NAND_ECC_BASE+NFECCERP0_OFFSET) #define NFECCERP1 (ELFIN_NAND_ECC_BASE+NFECCERP1_OFFSET) #define NFECCERP2 (ELFIN_NAND_ECC_BASE+NFECCERP2_OFFSET) #define NFECCERP3 (ELFIN_NAND_ECC_BASE+NFECCERP3_OFFSET) #define NFECCCONECC0 (ELFIN_NAND_ECC_BASE+NFECCCONECC0_OFFSET) #define NFECCCONECC1 (ELFIN_NAND_ECC_BASE+NFECCCONECC1_OFFSET) #define NFECCCONECC2 (ELFIN_NAND_ECC_BASE+NFECCCONECC2_OFFSET) #define NFECCCONECC3 (ELFIN_NAND_ECC_BASE+NFECCCONECC3_OFFSET) #define NFECCCONECC4 (ELFIN_NAND_ECC_BASE+NFECCCONECC4_OFFSET) #define NFECCCONECC5 (ELFIN_NAND_ECC_BASE+NFECCCONECC5_OFFSET) #define NFECCCONECC6 (ELFIN_NAND_ECC_BASE+NFECCCONECC6_OFFSET) #define NFCONF_REG __REG(ELFIN_NAND_BASE+NFCONF_OFFSET) #define NFCONT_REG __REG(ELFIN_NAND_BASE+NFCONT_OFFSET) #define NFCMD_REG __REG(ELFIN_NAND_BASE+NFCMMD_OFFSET) #define NFADDR_REG __REG(ELFIN_NAND_BASE+NFADDR_OFFSET) #define NFDATA_REG __REG(ELFIN_NAND_BASE+NFDATA_OFFSET) #define NFDATA8_REG __REGb(ELFIN_NAND_BASE+NFDATA_OFFSET) #define NFMECCDATA0_REG __REG(ELFIN_NAND_BASE+NFMECCDATA0_OFFSET) #define NFMECCDATA1_REG __REG(ELFIN_NAND_BASE+NFMECCDATA1_OFFSET) #define NFSECCDATA0_REG __REG(ELFIN_NAND_BASE+NFSECCDATA0_OFFSET) #define NFSBLK_REG __REG(ELFIN_NAND_BASE+NFSBLK_OFFSET) #define NFEBLK_REG __REG(ELFIN_NAND_BASE+NFEBLK_OFFSET) #define NFSTAT_REG __REG(ELFIN_NAND_BASE+NFSTAT_OFFSET) #define NFESTAT0_REG __REG(ELFIN_NAND_BASE+NFESTAT0_OFFSET) #define NFESTAT1_REG __REG(ELFIN_NAND_BASE+NFESTAT1_OFFSET) #define NFMECC0_REG __REG(ELFIN_NAND_BASE+NFMECC0_OFFSET) #define NFMECC1_REG __REG(ELFIN_NAND_BASE+NFMECC1_OFFSET) #define NFSECC_REG __REG(ELFIN_NAND_BASE+NFSECC_OFFSET) #define NFMLCBITPT_REG __REG(ELFIN_NAND_BASE+NFMLCBITPT_OFFSET) #define NFCONF_ECC_MLC (1<<24) #define NFCONF_ECC_1BIT (0<<23) #define NFCONF_ECC_4BIT (2<<23) #define NFCONF_ECC_8BIT (1<<23) #define NFCONT_ECC_ENC (1<<18) #define NFCONT_WP (1<<16) #define NFCONT_MECCLOCK (1<<7) #define NFCONT_SECCLOCK (1<<6) #define NFCONT_INITMECC (1<<5) #define NFCONT_INITSECC (1<<4) #define NFCONT_INITECC (NFCONT_INITMECC | NFCONT_INITSECC) #define NFCONT_CS (1<<1) #define NFSTAT_ECCENCDONE (1<<25) #define NFSTAT_ECCDECDONE (1<<24) #define NFSTAT_RnB (1<<0) #define NFESTAT0_ECCBUSY (1<<31) /* Access Controller (TZPC) */ #define TZPC_DECPROT0SET_OFFSET 0x804 #define TZPC_DECPROT1SET_OFFSET 0x810 #define TZPC_DECPROT2SET_OFFSET 0x81C #define TZPC_DECPROT3SET_OFFSET 0x828 /************************************************************* * OneNAND Controller *************************************************************/ #define ELFIN_ONENAND_BASE 0xB0000000 #define ELFIN_ONENANDCON_BASE (ELFIN_ONENAND_BASE + 0x600000) #define ONENAND_IF_CTRL_OFFSET 0x100 #define ONENAND_IF_CMD_OFFSET 0x104 #define ONENAND_IF_ASYNC_TIMING_CTRL_OFFSET 0x108 #define ONENAND_IF_STATUS_OFFSET 0x10C #define DMA_SRC_ADDR_OFFSET 0x400 #define DMA_SRC_CFG_OFFSET 0x404 #define DMA_DST_ADDR_OFFSET 0x408 #define DMA_DST_CFG_OFFSET 0x40C #define DMA_TRANS_SIZE_OFFSET 0x414 #define DMA_TRANS_CMD_OFFSET 0x418 #define DMA_TRANS_STATUS_OFFSET 0x41C #define DMA_TRANS_DIR_OFFSET 0x420 #define SQC_SAO_OFFSET 0x600 #define SQC_CMD_OFFSET 0x608 #define SQC_STATUS_OFFSET 0x60C #define SQC_CAO_OFFSET 0x610 #define SQC_REG_CTRL_OFFSET 0x614 #define SQC_REG_VAL_OFFSET 0x618 #define SQC_BRPAO0_OFFSET 0x620 #define SQC_BRPAO1_OFFSET 0x624 #define INTC_SQC_CLR_OFFSET 0x1000 #define INTC_DMA_CLR_OFFSET 0x1004 #define INTC_ONENAND_CLR_OFFSET 0x1008 #define INTC_SQC_MASK_OFFSET 0x1020 #define INTC_DMA_MASK_OFFSET 0x1024 #define INTC_ONENAND_MASK_OFFSET 0x1028 #define INTC_SQC_PEND_OFFSET 0x1040 #define INTC_DMA_PEND_OFFSET 0x1044 #define INTC_ONENAND_PEND_OFFSET 0x1048 #define INTC_SQC_STATUS_OFFSET 0x1060 #define INTC_DMA_STATUS_OFFSET 0x1064 #define INTC_ONENAND_STATUS_OFFSET 0x1068 /* * Memory controller */ #define ELFIN_SROM_BASE 0xE8000000 #define SROM_BW_REG __REG(ELFIN_SROM_BASE+0x0) #define SROM_BC0_REG __REG(ELFIN_SROM_BASE+0x4) #define SROM_BC1_REG __REG(ELFIN_SROM_BASE+0x8) #define SROM_BC2_REG __REG(ELFIN_SROM_BASE+0xC) #define SROM_BC3_REG __REG(ELFIN_SROM_BASE+0x10) #define SROM_BC4_REG __REG(ELFIN_SROM_BASE+0x14) #define SROM_BC5_REG __REG(ELFIN_SROM_BASE+0x18) /* * SDRAM Controller */ #define APB_DMC_0_BASE 0xF0000000 #define APB_DMC_1_BASE 0xF1400000 #define ASYNC_MSYS_DMC0_BASE 0xF1E00000 #define DMC_CONCONTROL 0x00 #define DMC_MEMCONTROL 0x04 #define DMC_MEMCONFIG0 0x08 #define DMC_MEMCONFIG1 0x0C #define DMC_DIRECTCMD 0x10 #define DMC_PRECHCONFIG 0x14 #define DMC_PHYCONTROL0 0x18 #define DMC_PHYCONTROL1 0x1C #define DMC_RESERVED 0x20 #define DMC_PWRDNCONFIG 0x28 #define DMC_TIMINGAREF 0x30 #define DMC_TIMINGROW 0x34 #define DMC_TIMINGDATA 0x38 #define DMC_TIMINGPOWER 0x3C #define DMC_PHYSTATUS 0x40 #define DMC_CHIP0STATUS 0x48 #define DMC_CHIP1STATUS 0x4C #define DMC_AREFSTATUS 0x50 #define DMC_MRSTATUS 0x54 #define DMC_PHYTEST0 0x58 #define DMC_PHYTEST1 0x5C #define DMC_QOSCONTROL0 0x60 #define DMC_QOSCONFIG0 0x64 #define DMC_QOSCONTROL1 0x68 #define DMC_QOSCONFIG1 0x6C #define DMC_QOSCONTROL2 0x70 #define DMC_QOSCONFIG2 0x74 #define DMC_QOSCONTROL3 0x78 #define DMC_QOSCONFIG3 0x7C #define DMC_QOSCONTROL4 0x80 #define DMC_QOSCONFIG4 0x84 #define DMC_QOSCONTROL5 0x88 #define DMC_QOSCONFIG5 0x8C #define DMC_QOSCONTROL6 0x90 #define DMC_QOSCONFIG6 0x94 #define DMC_QOSCONTROL7 0x98 #define DMC_QOSCONFIG7 0x9C #define DMC_QOSCONTROL8 0xA0 #define DMC_QOSCONFIG8 0xA4 #define DMC_QOSCONTROL9 0xA8 #define DMC_QOSCONFIG9 0xAC #define DMC_QOSCONTROL10 0xB0 #define DMC_QOSCONFIG10 0xB4 #define DMC_QOSCONTROL11 0xB8 #define DMC_QOSCONFIG11 0xBC #define DMC_QOSCONTROL12 0xC0 #define DMC_QOSCONFIG12 0xC4 #define DMC_QOSCONTROL13 0xC8 #define DMC_QOSCONFIG13 0xCC #define DMC_QOSCONTROL14 0xD0 #define DMC_QOSCONFIG14 0xD4 #define DMC_QOSCONTROL15 0xD8 #define DMC_QOSCONFIG15 0xDC /* * Memory Chip direct command */ /**************************************************************** Definitions for memory configuration Set memory configuration active_chips = 1'b0 (1 chip) qos_master_chip = 3'b000(ARID[3:0]) memory burst = 3'b010(burst 4) stop_mem_clock = 1'b0(disable dynamical stop) auto_power_down = 1'b0(disable auto power-down mode) power_down_prd = 6'b00_0000(0 cycle for auto power-down) ap_bit = 1'b0 (bit position of auto-precharge is 10) row_bits = 3'b010(# row address 13) column_bits = 3'b010(# column address 10 ) Set user configuration 2'b10=SDRAM/mSDRAM, 2'b11=DDR, 2'b01=mDDR Set chip select for chip [n] row bank control, bank address 0x3000_0000 ~ 0x37ff_ffff CHIP_[n]_CFG=0x30F8, 30: ADDR[31:24], F8: Mask[31:24] ******************************************************************/ #define INF_REG_BASE 0xE010F000 #define INF_REG0_REG __REG(INF_REG_BASE+INF_REG0_OFFSET) #define INF_REG1_REG __REG(INF_REG_BASE+INF_REG1_OFFSET) #define INF_REG2_REG __REG(INF_REG_BASE+INF_REG2_OFFSET) #define INF_REG3_REG __REG(INF_REG_BASE+INF_REG3_OFFSET) #define INF_REG4_REG __REG(INF_REG_BASE+INF_REG4_OFFSET) #define INF_REG5_REG __REG(INF_REG_BASE+INF_REG5_OFFSET) #define INF_REG6_REG __REG(INF_REG_BASE+INF_REG6_OFFSET) #define INF_REG7_REG __REG(INF_REG_BASE+INF_REG7_OFFSET) #define NFCONF_VAL (7<<12)|(7<<8)|(7<<4)|(0<<3)|(0<<2)|(1<<1)|(0<<0) #define NFCONT_VAL (0x1<<23)|(0x1<<22)|(0<<18)|(0<<17)|(0<<16)|(0<<10)|(0<<9)|(0<<8)|(0<<7)|(0<<6)|(0x2<<1)|(1<<0) #define MP03CON_VAL (1<<29)|(1<<25)|(1<<21)|(1<<17)|(1<<13)|(1<<9)|(1<<5)|(1<<1) #define ELFIN_TZPC0_BASE 0xF1500000 #define ELFIN_TZPC1_BASE 0xFAD00000 #define ELFIN_TZPC2_BASE 0xE0600000 #define ELFIN_TZPC3_BASE 0xE1C00000
相关推荐
总结，S5PV210的启动涉及多个层次的初始化，从硬件自检到操作系统加载，每个步骤都至关重要。掌握这些知识对于裸板驱动开发来说是必不可少的，它能帮助开发者更有效地调试和优化系统，确保设备能够顺利运行。通过...
"S5PV210(裸机程序).zip"这个压缩包就提供了这样一种学习资源，包含了一系列针对S5PV210的裸机程序，涵盖了串口、LCD、LED、SDRAM以及nand等关键模块。 首先，让我们聚焦于Cortex-A8架构。Cortex-A8是ARM公司推出的...
S5PV210是一款由三星公司生产的高性能精简指令集微处理器，广泛应用于嵌入式系统领域。它的内部集成了多种硬件特性，包括64KB的内部ROM（iROM）、96KB的内部SRAM、通用SDRAM及其控制器、高速SD/MMC控制器、NandFlash...
① 所谓内存初始化就是设置SoC内部的DRAM controller（简称DMC） ② DMC的主要功能有2点， a. 地址信号转换 程序中的物理地址 --> 地址线上的信号 --> 内存内部的寻址信号 b. 处理内存访问的各种时序（由于时序复杂...
在嵌入式系统，尤其是基于特定处理器如S5PV210的系统中，对DDR内存的初始化和重定位是非常关键的步骤，因为它们直接影响到系统的启动性能和稳定性。 S5PV210是一款由Samsung开发的高性能、低功耗的应用处理器，集成...
Tiny210是一款基于Samsung S5PV210处理器的开发板，常用于嵌入式系统的教学和开发。S5PV210是一款高性能、低功耗的Cortex-A8内核处理器，拥有强大的处理能力和丰富的外围接口，是许多嵌入式项目中的首选平台。 一、...
1. **处理器支持**：UBoot针对S5PV210处理器进行了适配，确保其正确初始化和管理处理器的特性，如CPU频率设置、电压调整等。 2. **存储器管理**：考虑到Tiny4412的内存布局，UBoot会正确配置SDRAM控制器，确保内核...
Tiny210是一款基于Samsung S5PV210处理器的嵌入式开发板，它拥有丰富的外设接口，如LCD、定时器、NAND闪存、音频控制器、时钟、SDRAM、UART串口以及shell等。 标题中的"src.zip_linux中断_linux中断_tiny210"暗示了...
本次移植的目标平台是OK6410开发板，该开发板基于三星S5PV210芯片，内置了256MB DDR内存和2GB NAND Flash存储空间，具备丰富的外设接口，非常适合用于嵌入式系统的开发。 #### 二、移植环境配置 移植u-boot-2012....
- 未提供具体目录，但应包括实验箱的初始化设置、实验步骤、调试技巧等内容。 #### 四、华清远见FSPAD_733 Android移动互联网实验箱 ##### 4.1 实物图及模块组成 - **实物图**: 实验箱的实际外观。 - **模块组成**...