1:首先下载redis:redis-2.0.2.zip (32 bit),解压。
从下面地址下:http://code.google.com/p/servicestack/wiki/RedisWindowsDownload,看到下面有redis-2.0.2.zip (32 bit),就是他了,下载完成后,解压到D:\redis-2.0.2.
2:创建redis.conf文件:
这是一个配置文件,指定了redis的监听端口,timeout等。如下面有:port 6379。
把下面内容COPY到一新建文件中,取名redis.conf,再保存到redis-2.0.2目录下:
# Redis configuration file example
# By default Redis does not run as a daemon. Use 'yes' if you need it.
# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
daemonize no
# When run as a daemon, Redis write a pid file in /var/run/redis.pid by default.
# You can specify a custom pid file location here.
pidfile /var/run/redis.pid
# Accept connections on the specified port, default is 6379
port 6379
# If you want you can bind a single interface, if the bind option is not
# specified all the interfaces will listen for connections.
#
# bind 127.0.0.1
# Close the connection after a client is idle for N seconds (0 to disable)
timeout 300
# Set server verbosity to 'debug'
# it can be one of:
# debug (a lot of information, useful for development/testing)
# notice (moderately verbose, what you want in production probably)
# warning (only very important / critical messages are logged)
loglevel debug
# Specify the log file name. Also 'stdout' can be used to force
# the demon to log on the standard output. Note that if you use standard
# output for logging but daemonize, logs will be sent to /dev/null
logfile stdout
# Set the number of databases. The default database is DB 0, you can select
# a different one on a per-connection basis using SELECT <dbid> where
# dbid is a number between 0 and 'databases'-1
databases 16
################################ SNAPSHOTTING #################################
#
# Save the DB on disk:
#
# save <seconds> <changes>
#
# Will save the DB if both the given number of seconds and the given
# number of write operations against the DB occurred.
#
# In the example below the behaviour will be to save:
# after 900 sec (15 min) if at least 1 key changed
# after 300 sec (5 min) if at least 10 keys changed
# after 60 sec if at least 10000 keys changed
save 900 1
save 300 10
save 60 10000
# Compress string objects using LZF when dump .rdb databases?
# For default that's set to 'yes' as it's almost always a win.
# If you want to save some CPU in the saving child set it to 'no' but
# the dataset will likely be bigger if you have compressible values or keys.
rdbcompression yes
# The filename where to dump the DB
dbfilename dump.rdb
# For default save/load DB in/from the working directory
# Note that you must specify a directory not a file name.
dir ./
################################# REPLICATION #################################
# Master-Slave replication. Use slaveof to make a Redis instance a copy of
# another Redis server. Note that the configuration is local to the slave
# so for example it is possible to configure the slave to save the DB with a
# different interval, or to listen to another port, and so on.
#
# slaveof <masterip> <masterport>
# If the master is password protected (using the "requirepass" configuration
# directive below) it is possible to tell the slave to authenticate before
# starting the replication synchronization process, otherwise the master will
# refuse the slave request.
#
# masterauth <master-password>
################################## SECURITY ###################################
# Require clients to issue AUTH <PASSWORD> before processing any other
# commands. This might be useful in environments in which you do not trust
# others with access to the host running redis-server.
#
# This should stay commented out for backward compatibility and because most
# people do not need auth (e.g. they run their own servers).
#
# requirepass foobared
################################### LIMITS ####################################
# Set the max number of connected clients at the same time. By default there
# is no limit, and it's up to the number of file descriptors the Redis process
# is able to open. The special value '0' means no limts.
# Once the limit is reached Redis will close all the new connections sending
# an error 'max number of clients reached'.
#
# maxclients 128
# Don't use more memory than the specified amount of bytes.
# When the memory limit is reached Redis will try to remove keys with an
# EXPIRE set. It will try to start freeing keys that are going to expire
# in little time and preserve keys with a longer time to live.
# Redis will also try to remove objects from free lists if possible.
#
# If all this fails, Redis will start to reply with errors to commands
# that will use more memory, like SET, LPUSH, and so on, and will continue
# to reply to most read-only commands like GET.
#
# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a
# 'state' server or cache, not as a real DB. When Redis is used as a real
# database the memory usage will grow over the weeks, it will be obvious if
# it is going to use too much memory in the long run, and you'll have the time
# to upgrade. With maxmemory after the limit is reached you'll start to get
# errors for write operations, and this may even lead to DB inconsistency.
#
# maxmemory <bytes>
############################## APPEND ONLY MODE ###############################
# By default Redis asynchronously dumps the dataset on disk. If you can live
# with the idea that the latest records will be lost if something like a crash
# happens this is the preferred way to run Redis. If instead you care a lot
# about your data and don't want to that a single record can get lost you should
# enable the append only mode: when this mode is enabled Redis will append
# every write operation received in the file appendonly.log. This file will
# be read on startup in order to rebuild the full dataset in memory.
#
# Note that you can have both the async dumps and the append only file if you
# like (you have to comment the "save" statements above to disable the dumps).
# Still if append only mode is enabled Redis will load the data from the
# log file at startup ignoring the dump.rdb file.
#
# The name of the append only file is "appendonly.log"
#
# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
# log file in background when it gets too big.
appendonly no
# The fsync() call tells the Operating System to actually write data on disk
# instead to wait for more data in the output buffer. Some OS will really flush
# data on disk, some other OS will just try to do it ASAP.
#
# Redis supports three different modes:
#
# no: don't fsync, just let the OS flush the data when it wants. Faster.
# always: fsync after every write to the append only log . Slow, Safest.
# everysec: fsync only if one second passed since the last fsync. Compromise.
#
# The default is "always" that's the safer of the options. It's up to you to
# understand if you can relax this to "everysec" that will fsync every second
# or to "no" that will let the operating system flush the output buffer when
# it want, for better performances (but if you can live with the idea of
# some data loss consider the default persistence mode that's snapshotting).
appendfsync always
# appendfsync everysec
# appendfsync no
############################### ADVANCED CONFIG ###############################
# Glue small output buffers together in order to send small replies in a
# single TCP packet. Uses a bit more CPU but most of the times it is a win
# in terms of number of queries per second. Use 'yes' if unsure.
glueoutputbuf yes
# Use object sharing. Can save a lot of memory if you have many common
# string in your dataset, but performs lookups against the shared objects
# pool so it uses more CPU and can be a bit slower. Usually it's a good
# idea.
#
# When object sharing is enabled (shareobjects yes) you can use
# shareobjectspoolsize to control the size of the pool used in order to try
# object sharing. A bigger pool size will lead to better sharing capabilities.
# In general you want this value to be at least the double of the number of
# very common strings you have in your dataset.
#
# WARNING: object sharing is experimental, don't enable this feature
# in production before of Redis 1.0-stable. Still please try this feature in
# your development environment so that we can test it better.
# shareobjects no
# shareobjectspoolsize 1024
3:在cmd下面执行以下命令,指定它使用我们的redis.conf,同时也是启动,把redis运行起来,这里指定用redis.conf的配置运行服务器
D:\redis-2.0.2>redis-server.exe redis.conf
4:开一新DOS窗口cmd.执行以下命令,这是Redis的客户端程序:
redis-cli.exe -h 172.18.5.1 -p 6379
172.18.5.1是我本机IP地址,端口6379就是上面配置文件中指定的监听端口
执行完成后,应该能看到redis启动了,这时在第一个cmd窗口可以看到连接信息。
执行一条保存key value操作
set mystock 300156
再查询一下
get mystock
=================================
可以完全参考以下地址的资料:
http://hi.baidu.com/zchare/blog/item/bd6034f325d1c65f352acca1.html(very good,安全可以成功)
http://cardyn.iteye.com/blog/794194
http://zhaohaolin.iteye.com/blog/1017561
- 浏览: 395838 次
- 性别:
- 来自: 北京
博客专栏
-
Spring Roo杂谈
浏览量:0
文章分类
- 全部博客 (418)
- SPRING (19)
- WEB前端 (15)
- IBATIS (4)
- HIBERNATE (0)
- JSF (0)
- WEBSERVICES (0)
- DESIGN PATTERN (9)
- UML (3)
- J2SE (30)
- BASIC CONCEPT (2)
- EJB (1)
- interview (71)
- cache (6)
- 设计 (6)
- NONSENSE (1)
- Problems (28)
- time (3)
- Future Problems (2)
- INFO (24)
- Performance (12)
- java (14)
- core (1)
- lib (1)
- famous (9)
- VersionManage (26)
- Big Data (10)
- netty (0)
- exception (1)
- design (1)
- 规则引擎 (3)
- Method (22)
- nosql (14)
- nosql-redis (2)
- DATABASE (32)
- Cluster (6)
- Linux (13)
- 高并发 (2)
- sport (0)
- Arithmetic (8)
- TEST (1)
- Python (7)
- 公共平台 (3)
- spring roo (7)
- server (1)
- Cases (1)
- security (1)
- opensource (8)
- architect (5)
- O2O (0)
- P2P (0)
最新评论
-
liutingna86:
程序没有提取新的链接,只是分析url.txt中链接页面的内容是 ...
Java编程技巧:小爬虫程序(转) -
u013680195:
CSS基础教程17篇 此教程共17篇,由浅到深、循序渐进的讲述 ...
每个Web开发者必备的9个软技能(转) -
zhb8015:
有一个解决的方法:把DTD文件从mybatis.jar中拿出来 ...
求助: exception is java.net.UnknownHostException: mybatis.org -
zhb8015:
问题可能找到了,spring-test对于(@ContextC ...
求助:NoSuchBeanDefinitionException: No bean named 'userService' is defined
发表评论
-
hadoop 大数据笔记
2015-06-19 17:48 5551、问题1 localhost: start ... -
超详细单机版搭建hadoop环境图文解析(转)
2015-06-18 19:24 524源:http://www.cnblogs.com/end/a ... -
十道海量数据处理面试题与十个方法大总结
2015-04-01 10:53 580第一部分、十道海量数 ... -
Sqoop安装过程详解
2014-05-19 11:02 893Sqoop是一个用来将Hadoop和关系型数据库中的数据相互 ... -
HBase技术介绍
2014-05-19 11:00 1019HBase简介 HBase – Hadoop Datab ... -
Sqoop--Hadoop和关系型数据库中的数据相互转移的工具
2014-05-19 10:42 1569Sqoop是一个用来将Hadoop和关系型数据库中的数据相互 ... -
大数据处理分析的六大工具(转)
2014-05-19 10:34 800大数据是一个含义广泛 ... -
Oracle连接hadoop(转)
2014-05-16 10:09 1765原文地址:http://blog ... -
典型的大数据架构
2014-03-06 23:10 1527Any data archit ... -
典型的大数据架构
2014-03-06 22:46 0Any data architecture ...
相关推荐
1. **安装Redis on Windows** - Redis官方并不直接提供Windows版本,但社区提供了预编译的Windows二进制版本,如MSOpenTech或RedisLabs的Redis-x64。 - 下载相应版本的Redis安装包,解压到指定目录。 - 运行`...
4. `Redis on Windows.docx`、`Windows Service Documentation.docx`、`Redis on Windows Release Notes.docx`:这些文档提供了关于在Windows上安装、配置和管理Redis的详细信息,包括服务的创建、操作指南和版本...
5. **Windows服务API**:为了让Redis在Windows上作为服务运行,需要使用Windows服务API进行安装、启动和管理。这包括创建服务、设置启动选项以及处理服务停止和异常情况。 总的来说,Redis on Windows不仅需要处理...
- `Redis on Windows.docx`:这份文档详细介绍了如何在Windows上安装和配置Redis,包括可能遇到的问题和解决方法。 - `Windows Service Documentation.docx`:这份文档专门讲述了如何将Redis作为Windows服务进行...
"Redis on Windows.docx"很可能是一个详细的安装教程,指导用户如何在Windows环境中安装和配置Redis。"Windows Service Documentation.docx"可能包含了关于如何将Redis作为Windows服务进行安装和管理的信息。"Redis ...
- `Redis on Windows Release Notes.docx`和`Redis on Windows.docx`是关于Redis在Windows平台上使用和安装的官方文档,包含了版本更新信息和使用指南。 6. **数据持久化**:Redis支持两种持久化方式,AOF(Append...
- "Redis on Windows.docx":可能包含有关在 Windows 上使用 Redis 的详细指南,包括安装、配置和使用技巧。 - "Windows Service Documentation.docx":这份文档应提供有关如何将 Redis 配置为 Windows 服务的指导...
**安装与配置Redis on Windows:** 1. 解压下载的"redis-6.2.14-win-amd64"到指定目录。 2. 修改`redis.windows.conf`配置文件,根据需求调整参数,如默认端口6379、最大内存限制、是否启用保护模式等。 3. 启动...
压缩包中的`.docx`文件,如`Redis on Windows.docx`、`Windows Service Documentation.docx`和`Redis on Windows Release Notes.docx`提供了详细的操作指南和更新信息,建议仔细阅读以了解更多信息。 6. **其他...
window系统上使用redis 压缩包里有64位和32位的,请选择解压。 解压到E盘根目录(解压目录随你设置) 打开cmd窗口,进入redis根目录 启动redis 输入命令:redis-server.exe redis.conf 启动cmd窗口要一直开着,...
安装Redis on Windows时,需要将可执行文件添加到系统环境变量PATH中,以便于在命令行中直接启动Redis服务。配置文件用于设置Redis的各种参数,如端口、数据库数量、持久化策略等。在启动Redis服务之前,根据实际...
2. "Redis%20on%20Windows.docx":这可能是一个关于如何在Windows系统上安装和运行Redis的文档,包括详细步骤、注意事项和可能遇到的问题及解决方案。 3. "RedisService.docx":这个文件可能涉及如何将Redis作为...
压缩包中还包括了关于Windows环境下Redis的文档,如"Redis on Windows.docx",该文档详细介绍了在Windows上安装和运行Redis的步骤,包括配置文件的使用、服务的安装和启动等。"Windows Service Documentation.docx...
文档方面,`Redis on Windows.docx`、`Windows Service Documentation.docx`和`Redis on Windows Release Notes.docx`分别提供了关于在Windows环境下安装和使用Redis的详细指南、服务相关的文档以及版本发布说明。...
**Redis在Windows上的安装与配置** Redis是一款高性能的键值存储系统,通常用于数据库、缓存和消息中间件。在Linux环境下,Redis非常流行,但同样可以在Windows操作系统上运行。本指南将详细介绍如何在Windows 64位...
1. **Redis on Windows.docx**:这可能是一个详细的文档,指导用户如何在Windows操作系统上安装和运行Redis,包括集群的配置步骤和注意事项。阅读此文档对于理解如何利用这个预配置的集群至关重要。 2. **7002, ...
**安装Redis on Windows** 1. 使用`.msi`文件进行安装,按照向导步骤操作,选择安装路径和配置选项。 2. 或者,解压`.zip`文件到任意目录,然后手动配置`redis.conf`以适应Windows环境,如修改`daemonize`为`yes`以...
4. **Redis on Windows.docx**:这可能是关于如何在Windows上安装和使用Redis的文档,包括安装步骤、配置说明等。 5. **Windows Service Documentation.docx**:这份文档详细介绍了如何将Redis作为Windows服务进行...
另外,压缩包中包含的三份文档("Redis on Windows.docx"、"Windows Service Documentation.docx"、"Redis on Windows Release Notes.docx")提供了关于在Windows上安装和使用Redis的详细指导,包括服务安装、配置...
RedisDesktopManager 0.9.7 绿色版,兼容win7以上64位和32位系统,解压之后直接运行rdm.exe,如果运行没有反应或者提示错误,安装vc_redist.x86.exe即可。 更新日志: Improvements Update value editor when ...