找了一圈，改了一圈，这是最终有效的解决方式：
转自： http://www.codeproject.com/Questions/272087/Failed-to-allocate-memory-1455
I have the best and right solution proved according to the indications by Calvin in techarena forums.
- Click Start, click Run, type sysdm.cpl in the Open box, and then press ENTER.
- Click the Advanced tab, and then under Performance click Settings.
- Click the Advanced tab, and then under Virtual memory click Change.
- Under Drive [Volume Label], click the drive that contains the paging file that you want to change.
- Under Paging file size for selected drive, click Custom size, type a new paging file size in megabytes (MB) in the Initial size (MB) or Maximum size (MB) box, and then click Set.
- Click OK to close the dialog box and apply changes.
This usual error "Failed to allocate memory: 1455" would be caused by Virtual Memory alocation. After resolving in this way the allocation of Virtual Memory for the root C disk, you should read in the console of Eclipse, the following:
[2011-11-27 12:33:06 - Videotutorial1] ------------------------------
[2011-11-27 12:33:06 - Videotutorial1] Android Launch!
[2011-11-27 12:33:06 - Videotutorial1] adb is running normally.
[2011-11-27 12:33:06 - Videotutorial1] Performing com.videotutoriales.videotutorial1.Videotutorial1Activity activity launch
[2011-11-27 12:33:06 - Videotutorial1] Automatic Target Mode: Preferred AVD 'VtAVD' is not available. Launching new emulator.
[2011-11-27 12:33:06 - Videotutorial1] Launching a new emulator with Virtual Device 'VtAVD'
[2011-11-27 12:33:39 - Emulator] emulator: emulator window was out of view and was recentered
[2011-11-27 12:33:39 - Emulator]
[2011-11-27 12:33:45 - Videotutorial1] New emulator found: emulator-5554
[2011-11-27 12:33:45 - Videotutorial1] Waiting for HOME ('android.process.acore') to be launched...
[2011-11-27 12:38:19 - Videotutorial1] HOME is up on device 'emulator-5554'
[2011-11-27 12:38:19 - Videotutorial1] Uploading Videotutorial1.apk onto device 'emulator-5554'
[2011-11-27 12:38:20 - Videotutorial1] Installing Videotutorial1.apk...
[2011-11-27 12:40:52 - Videotutorial1] Success!
[2011-11-27 12:40:53 - Videotutorial1] Starting activity com.videotutoriales.videotutorial1.Videotutorial1Activity on device emulator-5554
[2011-11-27 12:41:18 - Videotutorial1] Attempting to connect debugger to 'com.videotutoriales.videotutorial1' on port 8628
分享到：
相关推荐
Android在启动模拟器AVD时，出现下面的异常：“Failed to allocate memory: 8”，怎么办？ 此错误是我们在允许AVD时，选择了默认的AVD插件所致。 解决方法：减少分配的内存大小。修改AVD的配置文件，将选项“hw.ram...
在Android开发过程中，使用模拟器进行测试是必不可少的步骤，然而有时我们可能会遇到启动模拟器时出现"Failed To Allocate memory 8"的错误提示。这个错误通常意味着系统无法分配足够的内存资源来运行模拟器，导致...
2. `[ERROR] InnoDB: Cannot allocate memory for the buffer pool` - 这表示InnoDB无法为缓冲池分配内存，缓冲池是InnoDB用来缓存数据和索引的重要组件。 3. `[ERROR] Plugin 'InnoDB' init function returned ...
然而，有时候在启动模拟器时会遇到一个常见的问题，即“Failed To Allocate memory 8”的错误。这个错误意味着系统在尝试为模拟器分配内存时遇到了问题，导致无法正常启动。下面我们将深入探讨这个问题的原因以及...
Memory Allocation Failed(处理方案).md
最近公司将内部使用的代码由svn迁到了git上，所以也必须学者使用Git命令。 虽说git的模式和svn区别很大，但想必也不是什么难事。...fatal: Out of memory, malloc failed (tried to allocate 1941159936 b
printk(KERN_ERR "Failed to map memory\n"); return -ENOMEM; } printk(KERN_INFO "Memory mapped successfully\n"); return 0; } static void __exit my_dma_module_exit(void) { iounmap(mapped_memory); ...
4. failed to with "configure: error: "Could not find libreadline headers or library" 错误原因：缺少libreadline头文件或库文件。 解决方法：apt-get install libreadline5-dev 5. fail with "checking for ...
printf("Failed to allocate moveable memory.\n"); } return 0; } ``` **5. 结论** 理解`GMEM_FIXED`和`GMEM_MOVABLE`的区别对于编写高效、可靠的Windows应用程序至关重要。`GMEM_FIXED`提供了稳定的内存地址...
printf("Failed to allocate memory.\n"); return 1; } // 调用EnumProcesses获取进程ID if (!EnumProcesses(processIds, bytesNeeded, &bytesNeeded)) { printf("Failed to enumerate processes.\n"); free...
printk(KERN_ERR "Failed to allocate memory for new protocol family\n"); return; } /* 填充协议族结构 */ family->create = create_my_socket; family->destroy = destroy_my_socket; family->hash = my...
fprintf(stderr, "Failed to allocate memory for widths array!\n"); free(font); return NULL; } // 初始化widths数组 for (int i = 0; i < font->width; i++) { font->widths[i] = /* 计算每个字符的实际...
MsgBox "Failed to allocate memory. Error code: " & Err.LastDllError End If Else MsgBox "Failed to get adapters info. Error code: " & Err.LastDllError End If End Sub ``` 在这个例子中，`Form1.frm`...
9. Java.lang.OutOfMemoryError: Failed to Allocate an Object in Native Memory 错误 * 原因分析：无法在 native 内存中分配对象 * 解决方案：增加 native 内存的大小、检查 native 内存的使用情况、优化 native ...
raise Exception.Create('Failed to allocate memory.'); BufferSize := SizeOf(INTERNET_CACHE_ENTRY_INFOA); Handle := FindFirstUrlCacheEntry(nil, Entry, @BufferSize); if Handle = INVALID_HANDLE_VALUE...
2019-12-24 10:16:12.70 Server Failed allocate pages: FAIL_PAGE_ALLOCATION 12 ``` 解决这类问题的方法通常包括： 1. **恢复正确的`max server memory`值**：通过运行适当的`sp_configure`命令，将`max server ...
DLL: When using J-Trace PRO with IAR EWARM a "failed to allocate x bytes of memory" error could occur. Fixed. DLL: Windows: Renesas RX: When using FINE interface and disabling ongoining debug mode on ...
printf("Failed to allocate memory.\n"); return 1; } if (GetAdaptersAddresses(AF_UNSPEC, GAA_FLAG_INCLUDE_PREFIX, NULL, pAddresses, &bufLen) != ERROR_SUCCESS) { printf("Failed to get adapters ...