#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#define ECANCELED 125 /* Operation Canceled */
#define ENOKEY 126 /* Required key not available */
#define EKEYEXPIRED 127 /* Key has expired */
#define EKEYREVOKED 128 /* Key has been revoked */
#define EKEYREJECTED 129 /* Key was rejected by service */
/* for robust mutexes */
#define EOWNERDEAD 130 /* Owner died */
#define ENOTRECOVERABLE 131 /* State not recoverable */
分享到:
相关推荐
Linux errno.h 文件错误号说明 errno.h 文件是 Linux 系统中一个非常重要的头文件,它定义了一系列的错误号,每个错误号对应着一个特定的错误信息。了解这些错误号对于 Linux 系统的开发和调试至关重要。 在 Linux...
errno.h 是C语言C标准函式库里的标头档,定义了通过错误码来回报错误资讯的宏.
标签中的"fcntl.h_wince direct.h_in_ce wince_errno.h"暗示了`errno.h`的使用,这是一个定义了错误码的头文件,当函数调用失败时,`errno`变量会存储对应的错误代码。在Windows CE中,虽然`errno`仍然可用,但其...
#include <errno.h> #include <math.h> #include <pthread.h> #include <semaphore.h> #include <sys/socket.h> #include <netdb.h> #include <netinet/in.h> #include <arpa/inet.h> /* Simplifies calls to bind...
│ errno.h │ errorrep.h │ errors.h │ evcode.h │ excpt.h │ exdisp.h │ exdispid.h │ fcntl.h │ fenv.h │ float.h │ fltdefs.h │ gdiplus.h │ getopt.h │ gettext-po.h │ glob.h │ gmon.h │ ...
C signal.h errno.h netdb.h setjmp.h signal.h string.hC signal.h errno.h netdb.h setjmp.h signal.h string.hC signal.h errno.h netdb.h setjmp.h signal.h string.h
11. `<errno.h>`:错误码定义,通过`errno`全局变量获取错误信息。 这些头文件不仅限于以上列举的,实际上还有很多其他头文件,涵盖了网络编程(如`<netdb.h>`、`<arpa/inet.h>`)、系统调用(如`<sys/syscall.h>`...
errno 变量是通过 include errno.h 头文件来定义的,errno 的值是一个整数,它的值可以通过查看 errno.h 中的宏定义来推测出错的原因。 在 Linux 中,当 C API 函数发生异常时,会将 errno 变量赋一个整数值,表示...
#include <errno.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/wait.h> #include <unistd.h> #define MAX_HOST_LEN 32 /* 主机名最大长度 */ #define MAX...
* <errno.h> : Error Codes Reported by (Some) Library Functions * <float.h> : Implementation-defined Floating-Point Limits * <limits.h> : Implementation-defined Limits * <locale.h> : Locale-...
#include <errno.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/wait.h> #include <unistd.h> #define MAX_HOST_LEN 32 /* 主机名最大长度 */ #define MAX...
`crtdefs.h`会定义一些预处理器宏,如`__cdecl`和`__stdcall`来指定函数调用约定,还有一些全局变量的声明,比如`errno`,用于存储错误代码。它还包含了对`_EXCEPTION_DISPOSITION`枚举类型的定义,这是处理异常时...
#include <errno.h> #include <getopt.h> #include <limits.h> #include <libgen.h> #include <locale.h> #include <stdbool.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> ...
<errno.h > 出错码 <fcntl.h > 文件控制 <float.h > 浮点常数 <signal.h > 信号 <stdarg.h > 可变参数表 <stddef.h > 标准定义 <stdio.h > 标准I/O库 <stdlib.h > 公用函数 <string.h > 字符串操作 ......
#include <errno.h> //定义错误码 #include <string.h>//字符串处理 #include <netdb.h> #include <sys/types.h>//send();recv(); #include <netinet/in.h>//htons(); #include <sys/socket.h>//send();recv(); #...
#include <linux/errno.h> #include <linux/miscdevice.h> #include <linux/fcntl.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/proc_fs.h> #include <linux/workqueue.h> #include ...
* <errno.h>:出错码 * <fenv.h>:浮点环境 * <float.h>:浮点常量 * <inttypes.h>:整型格式转换 * <iso646.h>:替代关系操作符宏 * <limits.h>:实现常量 * <locale.h>:局部类别 * <math.h>:数学常量 * <setjmp....
#include <errno.h> //定义错误码 #include <float.h> //浮点数处理 #include <fstream.h> //文件输入/输出 #include <iomanip.h> //参数化输入/输出 #include <iostream.h> //数据流输入/输出 #include ...
2. `mysql_error.h`:这个头文件定义了错误处理相关的函数和宏,如`mysql_errno()`返回最后一次操作的错误代码,`mysql_error()`返回对应的错误信息字符串,以及`MYSQL_ERRNO_*`常量,表示预定义的错误编号。...